Marius Stanciu
d6b2ed5d40
- Turkish language strings updated (by Mehmet Kaya)
...
- both for Excellon and Gerber editor fixed the direction of slots/pads when adding a circular array
2020-11-06 20:53:06 +02:00
Marius Stanciu
5d5ff75796
- in Excellon Editor remade the utility geometry generation for Circular Drill/Slot Array to show the array updated in real time and also fixed the adding of array in negative quadrants
2020-11-06 19:55:34 +02:00
Marius Stanciu
df9dd8f353
- in Gerber Editor remade the utility geometry generation for Circular Pad Array to show the array updated in real time and also fixed the adding of array in negative quadrants
2020-11-06 17:43:07 +02:00
Marius Stanciu
fbcf92bc13
- in Gerber Editor fixed the Add circular array capability
2020-11-06 16:37:25 +02:00
Marius Stanciu
01806d77a3
- in Gerber editor, for selection now the intersection of the click point and the geometry is determined for chunks of the original geometry, each chunk gets done in a separate process
2020-11-06 06:06:13 +02:00
Marius Stanciu
f1107fbd3b
- in Gerber Editor made the selection multithreaded in a bid to get more performance but until Shapely will start working on vectorized geometry this don't yield too much improvement
2020-11-06 05:17:12 +02:00
Marius Stanciu
d4fec5ae60
- fixed the annotation plotting in the CNCJob object
...
- created a new InputDialog widget that has the buttons and the context menu translated and replaced the old widget throughout the app
- updated the translation strings
2020-11-05 16:36:41 +02:00
Marius Stanciu
a4c8737ab7
- added a method for intersection to FlatCAMRtree class
2020-11-05 12:22:12 +02:00
Marius Stanciu
cbcd6595cb
- added more icons in the Gerber and Excellon Editors for the buttons
2020-11-05 02:42:51 +02:00
Marius Stanciu
fc85c00842
- refactored the name of the classes from the Gerber Editor
2020-11-05 01:54:37 +02:00
Marius Stanciu
675c7028bb
- in Gerber Editor added the shortcut key 'Space' to change the direction of the array of pads
2020-11-04 21:53:47 +02:00
Marius Stanciu
846c0dc59d
- fixed the UI layout in Excellon Editor and made sure that after changing a value in the Notebook side after the mouse is inside the canvas, the canvas takes the focus allowing the key shortcuts to work
...
- Turkish language strings updated (by Mehmet Kaya)
2020-11-04 21:40:17 +02:00
Marius Stanciu
90e3b26b68
- fixed issue with arrays of items could not be added in the Gerber/Excellon Editor when a translation is used
...
- fixed issue in the Excellon Editor where the Space key did not toggle the direction of the array of drills
- combed the application strings all over the app and trimmed them up until those starting with letter 'O'
- updated the translation strings
2020-11-04 18:40:59 +02:00
Marius Stanciu
2536bd6a7d
- in the Excellon Editor, added shortcut keys Space and Ctrl+Space for toggling the direction of the Slots, respectively for the Array of Slots
2020-11-04 03:20:42 +02:00
Marius Stanciu
c5217e1781
- moved all the UI stuff out of the Gerber Editor class in its own class
2020-11-04 02:20:40 +02:00
Marius Stanciu
3981215ba0
- fixed a series of issues in Gerber Editor tools when the user is trying to use the tools by preselecting a aperture without size (aperture macro)
2020-11-04 01:15:18 +02:00
Marius Stanciu
f5310148eb
- trimmed the application strings
2020-11-03 22:37:39 +02:00
Marius Stanciu
5170505f53
- trying to optimize Gerber Editor selection with the mouse
...
- optimized some of the strings
2020-11-03 06:21:53 +02:00
Marius Stanciu
334e2e1b91
- fixed borderline bug in Gerber editor when the edited Gerber object last aperture is a aperture without size (Aperture Macro)
...
- improved the loading of a Gerber object in the Gerber Editor
- updated translation strings
2020-11-02 22:55:07 +02:00
Marius Stanciu
4f9bb918d5
- in Copper Thieving Tool added a new parameter to filter areas too small to be desired in the copper thieving; added it to Preferences too
...
- Copper Thieving Tool added a new parameter to select what extra geometry to include in the Pattern Plating Mask; added it to the Preferences
- made a wide change on the spinners GUI ranges: from 9999.9999 all values to 10000.0000
- fixed some late issues in Corner Markers Tool new feature (messages)
- upgraded Calculator Tool and added the new parameter is the Preferences
- updated translation strings
2020-11-02 18:03:13 +02:00
Marius Stanciu
374c29b4b0
- fixed the Tcl Command AlignDrill
...
- fixed the Tcl Command AlignDrillGrid
- fixed the Tcl COmmand Panelize, Excellon panelization section
- Fixed an issue in Tool Calibration export_excellon method call
- PEP8 corrections all over the app
2020-11-02 03:32:00 +02:00
Marius Stanciu
094060f6e1
- added a parent to some of the FCInputDialog widgets used in the app such that those pop-up windows will b displayed in the center of the app main window as opposed to the center of the screen
...
- finished the Google-translation of not translated strings in Russian language
2020-10-31 21:50:56 +02:00
Marius Stanciu
0ef7924726
Merge remote-tracking branch 'origin/Beta_8.994' into Beta_8.994
2020-10-31 18:50:08 +02:00
Marius Stanciu
e71a48ff5c
- minor PEP corrections
2020-10-31 18:46:20 +02:00
Marius Stanciu
05f572902e
- fixed issue in Excellon Editor that crashed the app if using the Resize Drill feature by clicking in menu/toolbar
...
- fixed issue in Excellon Editor when using the menu links to Move or Copy Drills/Slots
- updated the strings
- updated the Turkish translation strings (by Mehmet Kaya)
2020-10-31 16:12:06 +02:00
Marius Stanciu
0774f8d643
- adapted HPGL importer to work within the new app
...
- in Gerber Editor fixed an error when using the Distance Tool with "Snap to center" option active: if clicking not on a pad Distance Tool was not working
- updated the Turkish translation strings (by Mehmet Kaya)
2020-10-31 01:28:00 +02:00
Marius Stanciu
3e1e12f42c
- fixed an error in the Gerber Editor
2020-10-30 20:47:06 +02:00
Marius Stanciu
fdfa6a22be
- more bugs that were introduced by recent changes done to solve other bugs and so on: fixed issues with the Editors and Delete shortcut
2020-10-30 20:04:55 +02:00
Marius Stanciu
11f494a1d1
- fixed issue #454 ; trigger signals for Editor Toolbars lost after changing the layout
2020-10-30 19:07:38 +02:00
Marius Stanciu
46d2304b67
- fixed a small issue in GCode Editor where the signals for the buttons were attached again at each launch of the GCode Editor
2020-10-29 17:25:08 +02:00
Marius Stanciu
fcfc819fff
- fixed NCC Tool not working with the new changes; the check for not having complete isolation is just a Warning
2020-10-29 15:03:17 +02:00
Marius Stanciu
86a931ace5
- temporary fix for comboboxes not finding the the value in the items when setting themselves with a value by defaulting to the first item in the list
2020-10-28 15:46:33 +02:00
Marius Stanciu
9491bdc4fc
- updated the Turkish translation (by Mehmet Kaya)
...
- the methods of the APP class that were the handlers for the File menu are now moved to their oen class
2020-10-24 19:50:34 +03:00
Marius Stanciu
8a341de4ca
- UI changes in the AppTextEditor and in CNCJob properties tab and in GCoe Editor
...
- some changes in strings; updated all the translation strings to the latest changes
- finished the Romanian translation
2020-10-24 15:58:20 +03:00
Marius Stanciu
c0671b7754
- minor changes
2020-10-24 01:52:53 +03:00
Marius Stanciu
f771838c81
- some refactoring in the keys of the defaults dictionary
...
- fixed an ambiguity in the Tools Database GUI elements
2020-10-23 23:14:13 +03:00
Marius Stanciu
427118c495
- added a default properties tab which will hold a set of information's about the application
2020-10-23 18:46:55 +03:00
Marius Stanciu
55b4fbc3d8
- updated some strings, updated the translation strings
...
- commented the ToolsDB class since it is not used currently
- some minor changes in the AppTextEditor.py file
- removed Hungarian language since it's looking like is no longer being translated
2020-10-23 14:16:05 +03:00
Marius Stanciu
e09ec574aa
- added some new strings for translation and updated the translation strings
...
- in ToolsDB2UI class made the vertical layouts have a preferred minimum dimension as opposed to the previous fixed one
- in Geometry Object made sure that the Tools Table second column is set to Resize to contents
2020-10-22 22:11:28 +03:00
Marius Stanciu
1a286cbf7e
- added some strings to the translatable strings and updated the translation strings
2020-10-21 16:07:21 +03:00
Marius Stanciu
66a3e36701
- cascaded_union() method will be deprecated in Shapely 1.8 in favor of unary_union; replaced the usage of cascaded_union with unary_union in all the app
2020-10-21 13:55:41 +03:00
Marius Stanciu
d5cf7b4980
- the Selected Tab is now Properties Tab for FlatCAM objects
...
- modified the Properties Tab for various FlatCAM objects preparing the move of Properties Tool data into the Properties Tab
- if the Properties tab is in focus (selected) when a new object is created then it is automatically selected therefore it's properties will be populated
2020-09-26 14:39:52 +03:00
Marius Stanciu
26ac02e484
- Cutout Tool - fixed mouse bites feature in case of using a Geometry object and Freeform cutout
...
- Cutout Tool - can do cutouts on multigeo Geometry objects: it will automatically select the geometry of first tool
- Geometry Editor - fixed exception raised when trying to move and there is no shape to move
2020-08-30 00:05:52 +03:00
Marius Stanciu
01df27f45f
- fixed issues in units conversion
...
- in CNCJob UI Autolevelling - changed how the probing code is generated and when
- changed some strings in CNCJob UI Autolevelling
2020-08-24 00:51:07 +03:00
Marius Stanciu
fd895e3c21
- in CNCJob UI Autolevelling - updated the UI with controls for probing GCode parameters and added signals and slots for the UI
...
- in CNCJob UI Autolevelling - added a mini gcode sender for the GRBL to be able to send the probing GCode and get the height map (I may make a small and light app for that so it does not need to have FlatCAM on the GCode sender PC)
- in CNCJob UI Autolevelling finished the probing GCode generation for MACH/LinuxCNC controllers; this GCode can also be viewed
2020-08-16 23:05:31 +03:00
Marius Stanciu
9b6c65cdcb
- all Geometry objects resulted from Isolation Tool are now of type multi-geo
...
- fixed minor glitch in the Isolation Tool UI
- added an extra check when doing selection on canvas
- fixed an UI problem in Gerber Editor
2020-08-07 13:55:32 +03:00
Marius Stanciu
eb28d28ea2
- GCode Editor - modified the UI
2020-08-03 23:20:41 +03:00
Marius Stanciu
ffda89f949
- GCode Editor - can not delete objects while in the Editor; can not close the Code Editor Tab except on Editor exit; activated the shortcut keys (for now only CTRL+S is working)
2020-08-03 22:01:42 +03:00
Marius Stanciu
7d47a133f6
- GCode Editor - GCode tool selection when clicking on tool in Tools table is working. The only issue is that the first tool gcode includes the start gcode which confuse the algorithm
2020-08-03 17:01:52 +03:00
Marius Stanciu
f557eeb98d
- GCode Editor - working on GCode tool selection - not OK
2020-08-02 22:25:48 +03:00