7607aad8d8
- added protection against entering float numbers with comma separator instead of decimal dot separator in key points of FlatCAM (not everywhere)
...
- added a choice of plotting the kind of geometry for the CNC plot (all, travel and cut kind of geometries) in CNCJob Selected Tab
2019-02-02 23:56:08 +02:00
de7e41991d
- fixed a source of possible errors in DetachableTab Widget.
...
- fixed gcode conversion/scale (on units change) when multiple values are found on each line
- replaced the pop-up window for the shortcut list with a new detachable tab
- removed the pop-up messages from the rotate, skew, flip commands
2019-02-02 03:27:34 +02:00
365c1f4c71
- remade the way FlatCAM saves the GUI position data from a file (previously) to use PyQt QSettings
...
- added a 'theme' combo selection in Edit -> Preferences. Two themes are available: standard and compact.
- some code cleanup
2019-02-02 01:25:35 +02:00
e0adb9b43b
- corrected small type in list_sys Tcl command; added a protection of the Plot Area Tab after a successful edit.
2019-02-01 17:44:28 +02:00
f4da8c8c68
- Plot Area Tab view can now be toggled, added entry in View Menu and shortcut key CTRL+F10
...
- All the tabs in the GUI right side are (Plot Are, Preferences etc) are now detachable to a separate windows which when closed it returns in the previous location in the toolbar. Those detached tabs can be also reattached by drag and drop.
2019-02-01 14:51:49 +02:00
080d148b37
- work on a FlatCAM compact theme
2019-02-01 04:12:03 +02:00
5ab89791c7
- FlatCAM saves now to a file in self.data_path the toolbar positions and the position of TCL Shell
2019-02-01 02:05:39 +02:00
d5853722c3
- updated the camlib.CNCJob.scale() function so now the GCode is scaled also (quite a HACK :( it will need to be replaced at some point)). Units change work now on the GCODE also.
2019-01-31 23:07:53 +02:00
093f210c25
- hidden the snap magnet entry and snap magnet toggle from the main view; they are now active only in Editor Mode
2019-01-31 16:10:13 +02:00
d1780acad9
- added new function to toggle fullscreen status in Menu -> View -> Toggle Full Screen. Shortcut key: Alt+F10
...
- added key shortcuts for Enable Plots, Disable Plots and Disable other plots functions (Alt+1, Alt+2, Alt+3)
2019-01-31 15:29:05 +02:00
3c355f72be
- added a parameter ('Fast plunge' in Edit -> Preferences -> Geometry Options and Excellon Options) to control if the fast move to Z_move is done or not
2019-01-31 13:58:49 +02:00
53d50c799f
- added to the postprocessor files the command after toolchange to go with G00 (fastest) to "Z Move" value of Z pozition.
2019-01-31 03:45:21 +02:00
7e5ce009d8
- added a traceback report in the TCL Shell for the errors that don't allow creation of an object; useful to trace exceptions/errors
...
- in case that the Toolchange X,Y parameter in Selected (or in Preferences) are deleted then the app will still do the job using the current coordinates for toolchange
- fixed an issue in camlib.CNCJob where tha variable self.toolchange_xy was used for 2 different purposes which created loss of information.
2019-01-30 23:17:27 +02:00
dbee97ccb9
- remade the App Menu for Editors: now they will be showed only when the respective Editor is active and hidden when the Editor is closed.
2019-01-30 17:27:11 +02:00
e5b4f5fd6b
- wip
2019-01-30 00:43:59 +02:00
369d9256da
- added 2Sided Tool default values in Edit -> Preferences -> Tools
2019-01-29 22:33:04 +02:00
be2ecaa152
- added a GUI for Excellon Search time for OR-TOOLS path optimization in Edit -> Preferences -> Excellon General -> Optimization Time
...
- more changes in Edit -> Preferences -> Geometry, Gerber and in CNCJob
- added new option for Cutout Tool Freeform Gaps in Edit -> Preferences -> Tools
- fixed Freeform Cutout gaps issue (it was double than the value set)
2019-01-29 21:47:27 +02:00
f6271033b3
- fixed issue in Tool Calculators when a float value was entered starting only with the dot.
...
- added protection for entering incorrect values in Offset and Scale fields for Gerber and Geometry objects (in Selected Tab)
2019-01-29 01:03:21 +02:00
e19af486b3
- added key shortcuts for Open Manual = F1 and for Open Online VideoHelp = F2
2019-01-28 03:24:06 +02:00
37e7c8167d
- fixed the FlatCAMGerber.merge() function
...
- added a new menu entry for the Gerber Join function: Edit -> Conversions -> "Join Gerber(s) to Gerber" allowing joining Gerber objects into a final Gerber object
2019-01-28 02:47:53 +02:00
8145ff9aac
- fixed the FlatCAMGerber.merge() function
...
- added a new menu entry for the Gerber Join function: Edit -> Conversions -> "Join Gerber(s) to Gerber" allowing joining Gerber objects into a final Gerber object
2019-01-28 02:01:53 +02:00
ad69be0456
- remade the EDIT -> PREFERENCES window, the Excellon and Gerber sections. Created a new section named TOOLS
2019-01-27 15:46:54 +02:00
a9bc0dea56
- added shortcut key combo 'SHIFT+S' for Running a Script.
2019-01-27 06:04:50 +02:00
18fb7c2c1f
- added shortcut key 'L' for creating 'New Excellon'
2019-01-27 05:50:41 +02:00
4f7b2bbb34
- added options for trace segmentation that can be useful for auto-levelling (code snippet from Lei Zheng from a rejected pull request on FlatCAM https://bitbucket.org/realthunder/ )
2019-01-27 05:03:23 +02:00
c4a9c8bd77
- added more key shortcuts into the application; they are now displayed in the GUI menu's
...
- reorganized the Edit -> Preferences -> Global
- redesigned the messagebox that is showed when quiting ot creating a New Project: now it has an option ('Cancel') to abort the process returning to the app
2019-01-27 03:32:09 +02:00
c0031235cd
- fixed grbl_laser postprocessor file
...
- updated function for copy of an Excellon object for the case when the object has slots
- updated FlatCAMExcellon.merge() function to work in case some (or all) of the merged objects have slots
2019-01-26 09:08:41 +02:00
41d7ef9e2c
- added icons to the Project Tab context menu
...
- added new entries to the Canvas context menu (Copy, Delete, Edit/Save, Move, New Excellon, New Geometry, New Project)
2019-01-26 00:12:40 +02:00
d1b1a097c1
- fixed TclCommand Cutout
...
- added a new TclCommand named CutoutAny. Keyword: cutout_any
2019-01-25 20:46:30 +02:00
3941d03702
- fixed TclCommand Cutout
...
- added a new TclCommand named CutoutAny. Keyword: cutout_any
2019-01-25 20:05:27 +02:00
4af4938f85
- added the Edit and Properties entries to the Project context menu
2019-01-24 20:58:36 +02:00
2c49d41500
- Excellon Editor - added possibility to create an linear drill array rotated at an custom angle
2019-01-24 20:38:53 +02:00
e8acee5850
- added multiple object selection on Open ... and Import ... (idea and code snippet came from Travers Carter, BitBucket user https://bitbucket.org/travc/
2019-01-24 15:48:34 +02:00
8f787fc61a
- fixed the Copy Object function when the object is Gerber
...
- added the Copy entry to the Project context menu
- made the functions behind Disable and Enable project context menu entries, non-threaded to fix a possible issue
2019-01-24 12:31:42 +02:00
037b9657ff
- trying to fix painting single when the actual painted object it's a MultiPolygon
2019-01-24 01:34:12 +02:00
d71958262a
- changed date
2019-01-23 19:01:20 +02:00
e945ced44b
- modified the way FlatCAM preferences are saved. Now they can be saved as new files with .FlatConfig extension by the user and shared.
2019-01-23 17:06:14 +02:00
4afa67542b
- changed date
2019-01-23 00:45:57 +02:00
e6d431c9e3
- removed the raise statement in do_worker_task() function as this is fatal in conjunction with PyQt5
...
- added a try - except clause for the situations when for a font can't be determined the family and name
- moved font parsing to the Geometry Editor: it is done everytime the Text tool is invoked
- made sure that the HPGL postprocessor is not populated in the Excellon postprocessors in Preferences as it make no sense (HPGL is useful only for Geometries)
2019-01-21 01:17:04 +02:00
f242e3163e
- small changes (dates, version)
2019-01-20 05:37:04 +02:00
7ea6ee4a85
- fixed the HPGL code geometry rendering when travel
...
- fixed the message box layout when asking to save the current work
- made sure that whenever the HPGL postprocessor is selected the Toolchange is always ON and the MultiDepth is OFF
- the HPGL postprocessor entry is not allowed in Excellon Object postprocessor selection combobox as it is only applicable for Geometry
2019-01-20 02:46:42 +02:00
43f9055408
- added initial implementation of HPGL postprocessor
2019-01-19 02:33:05 +02:00
18de843fc1
- added a status message for font parsing
2019-01-11 04:02:02 +02:00
e6b0eb209c
- added a message box asking users if they want to save the project in case that either New Project menu entry is clicked or if Exit menu entry is clicked or if the app is closed from the close button. The message box will be showed only if there are objects in the collection.
2019-01-09 20:55:54 +02:00
37067b5bff
- added a fix to allow creating of Excellon geometry even when there are points with no tools by skipping those points and warning the user about this in a Tcl message
2019-01-09 15:47:29 +02:00
dd49aaa68d
- added checkboxes in Preferences -> General -> Global Preferences to switch on/off version check at application startup and also to control if the app will send anonymous statistics about FlatCAM usage to help improve FlatCAM
2019-01-08 21:13:20 +02:00
7e002dfc9f
- added tooltips in Edit->Convert menu
2019-01-07 15:44:47 +02:00
c7db9aa566
- fixed the Marlin postprocessor detection in GCode header
...
- the version date in GCode header is now the one set in FlatCAMApp.App.version_date
- fixed bug in postprocessor files: number of drills is now calculated only for the Excellon objects in toolchange function (only Excellon objects have drills)
2019-01-07 02:56:55 +02:00
954bd9097a
- fixed the Join function to work on Gerber and Excellon, Gerber and Gerber, Excellon and Excelon combination of objects. The merged property is the solid_geometry and the result is a FlatCAMGeometry object.
2019-01-07 01:23:04 +02:00
b418d15daf
- reactivated the version check in case the release is not BETA; FlatCAMApp.App has now a beta object that when set True the application will show in the Title and help-> About that is Beta (and it disable version checking)
2019-01-06 22:04:01 +02:00
3ea1f4e62c
- fixed cncjob TclCommand - it used the default values for parameters
...
- fixed the layout in ToolTransform
- fixed the initial text in the ToolShell
2019-01-06 20:40:05 +02:00
6da418c4c8
- modified the Development link in Help -> About
2019-01-03 21:31:09 +02:00
e48d2d2f49
-clean-up before merge
2019-01-03 21:25:08 +02:00
421e9766ea
-clean-up before merge
2019-01-03 21:20:54 +02:00
01dcfb69a6
- remade the functions into a Tool framework
...
- renamed the other current files that holds 'Tools' to start with Tool
like Tcl commands start with TclCommand
2018-06-05 22:13:33 +03:00
782f784dee
- fixed a bug that created desync on rotate multiple objects that were
...
offseted from origin
2018-06-05 14:49:13 +03:00
74104ec19f
- modified the pull request to include along the flipX, flipY commands
...
also the Rotate, SkewX and SkewY commands. Fix for issue #235
All perform the same in regard of multiple object selection.
2018-06-05 13:43:14 +03:00
41e471d9d5
- changed the self.info() functions to signal self.inform.emit() and
...
the signal is emitted only once per operation not for each object in
selection.
2018-06-05 03:19:58 +03:00
e5dab6f9c3
- added flipx and flipy functions
2018-06-05 00:12:09 +03:00
9211da39c7
Merged in marius_stanciu/flatcam_mpl/add_global_setting_global_mouse_pan_button (pull request #105 )
...
New global_variable for mouse_pan_button
2018-06-04 16:53:44 +00:00
b63c3219a7
- added a new global setting only accessible through the Tcl Shell,
...
named: global_mouse_pan_button
It can be set through set_sys TclCommand or the value getted through
get_sys TclCommand.
Values are 1 for left mouse button, 2 for middle mouse button and
3 for right mouse button.
It does hurt my hand (wrist) keeping the middle mouse button pressed
when panning and I very much preffer panning with RMB.
The default setting is pan_button = middle mouse button.
2018-06-01 21:05:51 +03:00
f30b44d637
- automatically select the object on every new_object while previously
...
selected objects are deselected leaving the new object as the only one
selected.
2018-06-01 14:50:29 +03:00
b7d95feae3
Merged in marius_stanciu/flatcam_mpl/Menu_clening_icons_adding (pull request #94 )
...
Menu-Toolbars cleaning / adding icons / adding buttons
2018-05-31 15:41:14 +00:00
b005058586
Merge https://bitbucket.org/jpcgt/flatcam/src/master into Menu_clening_icons_adding
...
# Conflicts:
# FlatCAMDraw.py
# FlatCAMGUI.py
2018-05-31 18:31:35 +03:00
090fdf2b39
Merge https://bitbucket.org/jpcgt/flatcam/src/master into Menu_clening_icons_adding
...
# Conflicts:
# FlatCAMDraw.py
# FlatCAMGUI.py
2018-05-31 18:11:41 +03:00
5ff3f66b04
Merge https://bitbucket.org/jpcgt/flatcam/src/master into Follow_TCL_command_add_to_new_architecture
...
# Conflicts:
# FlatCAMApp.py
2018-05-31 17:53:35 +03:00
9e79843026
Merged in marius_stanciu/flatcam_mpl/Port_to_Python3k (pull request #84 )
...
Conversion from Python2 code to Python3 code
2018-05-31 13:15:50 +00:00
c67d2f0028
- modified the TCL comamand follow to the new architecture. Tested it and
...
it works without crashes. It can be safely pulled in.
2018-05-31 02:09:15 +03:00
8a9c4b4648
Merged in marius_stanciu/flatcam_mpl/fix_calls_to_info() (pull request #96 )
...
Fix issue #254
2018-05-30 20:04:27 +00:00
c85a142759
- fixing issue #254
...
- replaced (as per advice from @jpcgt) the lines with app.info call
to using a signal which is safe to use in a threaded environment,
app.inform.emit()
2018-05-30 22:52:50 +03:00
a6a26de0d3
Merge https://bitbucket.org/jpcgt/flatcam/src/master into Port_to_Python3k
...
# Conflicts:
# ObjectCollection.py
2018-05-30 20:38:43 +03:00
41dffe44d4
Merge https://bitbucket.org/marius_stanciu/flatcam_mpl/src/master into Port_to_Python3k
2018-05-30 17:54:34 +03:00
aff21d7cb0
- changed the default way to copy the coordinates to clipboard. Before,
...
at each mouse click on canvaas the coordinates were copied to clipboard.
Now for the same feet it require to have the CTRL key pressed while
clicking on canvas for the coordinates to be copied.
2018-05-30 08:02:03 +03:00
3b9767cc6f
- I've finally run the tests with OK result (56 tests in 102.937 sec)
...
- I had to play with module imports as they created a lot of error in
the tests although in reality the program worked OK.
- I've fixed some mistakes in TcL commands (they were testing isinstance
against the like of Geometry instead of FlatCAMGeometry)
- I've had to add some fixes in ObjectCollections.py (error on
create_index() method but Marco already fixed this in the checkbox
in project tab pull request and knew about this.
- Although at some point the tests run fine, I've made some checkings
on my own over the Tcl commands and discovered errors which I fixed as
mentioned above.
- conclusion is that tests are just a must and do not cover everything
(like saving projects which at some point by juggling with imports I
braked and tests were 100% OK)
2018-05-30 02:17:34 +03:00
30eb600c02
- added ability to add a menu-entry separator after the tool, on install
2018-05-29 17:23:06 +03:00
e1c8eaafa9
- in TCL Shell removed the line that setFocus after the item is disabled
...
(this is pointless)
- added separators between groups of menu items
- added icons for the Drawing -> Paint and for the Drawing - > Buffer
- added ability to add icons for the Tools
- added icons to the current tools (Dblsided Tool, Measurement Tool)
- added buttons in the toolbar for: Open Gerber, Open Excellon,
Open Gcode and Save Project As
- added button in Tools toolbar for Measurement tool
- added separators in the toolbar
- organized the toolbar buttons in multiple toolbars that can be disabled
with right click on the toolbar
- added names for the toolbars where they were not present
2018-05-29 16:48:06 +03:00
ef611753a6
- added the posibility to create an object without plotting it. Also if
...
the project is created with plot=False then it will not be checked in
Project tab
- improved the panelize command by toggling OFF the plot for the
temporary objects. There is no need to plot the temporary objects, only
the panel is of interest
- add a few aliases for the Panelize command ('pan' and 'panel')
2018-05-28 15:46:42 +03:00
a4bbb98bf1
- converted from Python2 code to Python3 code
...
- in camlib.py, CNCJob class -> generate_from_excellon_by_tool() was
failing in the line to sort the tools due of been unable to compare
between dict's. I replaced that section.
2018-05-26 04:43:40 +03:00
9564ab7334
Part 3, removed tab_change handler.
2018-05-04 19:43:29 -04:00
e971372d7c
Incorporating comments and functionality frpm JP. Removed need to use tab_change signal, removed inheritance dependency on QAbstractItemModel, implemented option_changed property.
2018-05-04 19:41:20 -04:00
8e4f081ac3
Synchronize the state of the plot checkboxes to the state of the settings.
2018-04-20 13:30:38 -04:00
cbad99e340
add python setuptools support
...
- add setup.py script,
- switch to use images via "share:" resource name
(this allows to work both versions of application:
- system wide installation,
- directly from source),
- add .desktop file,
- rename FlatCAM.py to flatcam and install it as an
executable script.
2017-06-06 22:06:33 +02:00
fb6e1135e9
Added comments.
2016-11-01 00:34:46 -04:00
261054f1cf
Cleanup of TclCommand and migrated a few more commands to new architecture.
2016-10-18 11:36:58 -04:00
f77403b0f2
Bringing up to date with VisPyCanvas. Mostly migration of Tcl commands to new architecture.
2016-10-08 11:49:22 -04:00
9f4ee91b0e
Comments at top of files. Also fixes #214 .
2016-09-22 10:17:51 -04:00
03c49f3afd
Attempt to fix #138 . Keeping open for verification.
2016-09-19 17:53:48 -04:00
7474609776
Added feature: Select all polygons for painting and shell support with "paint" command.
2016-09-19 16:44:29 -04:00
38d6957009
Added SVG-to-GCode flow test.
2016-07-15 22:23:48 -04:00
f5c7fdab71
Some cleanup to shell tests.
2016-07-04 16:25:59 -04:00
a9b4ff767b
Some cleanup to shell tests.
2016-07-03 15:59:25 -04:00
28bb476a5c
Fixes #202
2016-06-11 21:55:53 -04:00
f9cbd78cd1
Show messages and errors in TCL shell. Better exception handling and reporting when opening files.
2016-06-11 21:33:38 -04:00
856d126546
Added indent to json in save_project
...
This is to make the saved project file more version control frendly
2016-06-09 15:55:17 +08:00
ee8e9f8f4b
Support for mirroring Geometry Objects from the shell. See #119 .
2016-06-04 23:04:22 -04:00
6136afe84c
Added dwell (G4) post processing option to gcode.
2016-06-03 22:19:47 -04:00
36d0a2e029
Cleaned up tests for shell. Added test steps for gerber flow.
2016-06-03 17:15:35 -04:00
db15044706
fix exception thrown when new project is issued from shell(probbly from guy too) because of excellon_tooldia introduced,
...
but no default values and no in array dimensions on change units
defaults added for excellon_tooldia background_timeout and verbose_error_level in self.options.update({})
2016-04-12 13:09:41 +02:00
3717169105
Default excellon milling tool dia. Fixes #160 .
2016-04-10 16:23:04 -04:00
e236a60be9
implement system values background_timeout and verbose_error_level
...
implement correct error level handling based on verbose_error_level , fix double print of tcl error and do not wrap unknown exceptions into TCL known
2016-04-10 15:14:18 +02:00
fae9875dd8
remove unknown workaround
2016-04-10 11:09:26 +02:00
5bd6432ead
solve message in special tcl keywords used in wrong context as "unknown"
2016-04-06 11:20:53 +02:00
b98954dccd
fix error handling in signaled commands, error gets info about different scoup instead of true error
...
more detaild error print including python trace when more complex unknown error
reinplement drillcncjob
fix camlib problem with all drills("all" was already there) but it crashes on tools without points, when no tools "all" is as default
add timeout to all helps if command is signaled
2016-04-03 14:20:50 +02:00
a4845d150e
add important comment
2016-04-03 10:43:06 +02:00
f4ef7baedb
Merge branch 'merge-tcl-commands' of https://bitbucket.org/sopak/flatcam into tcl-commands
...
Conflicts:
FlatCAMApp.py
FlatCAMWorker.py
termwidget.py
2016-03-31 18:03:48 +02:00
80d6c657d5
merge changes from master
...
merge dockable shell
2016-03-25 13:56:18 +01:00
5ec25ebea6
remove blank line
2016-03-25 12:24:57 +01:00
4a57e437fc
Implement shell window as dockable
2016-03-25 12:16:54 +01:00
2082446ab0
tweak signal handling
2016-03-25 00:59:02 +01:00
e96ee1af29
merge new pull requests from FlatCAM->master
...
implement executing of tasks inside worker thread
cleanups, reimplement Isolate/New/OpenGerber as OOP style Shell commands
disable edit during shell execution, show some progress
add ability for breakpoints in other threads and only if available
add X11 safe flag, not sure what happen on windows
2016-03-24 23:06:44 +01:00
a520729444
Complete implementation of blocking mechanism waiting for signal. See #196 .
2016-03-24 16:06:44 -04:00
b0575a1c34
Tidying up imports.
2016-03-24 15:44:22 -04:00
d010fa27cf
Merge remote-tracking branch 'origin/master'
2016-03-23 14:59:24 -04:00
95676f21e2
Blocking in shell functions. Correctly report exceptions in threads. See #196 .
2016-03-23 14:58:53 -04:00
ed7b352c6a
Merged in grbd/flatcam (pull request #35 )
...
Added initial svg export functionality
2016-03-23 12:02:24 -04:00
790f53dd55
Blocking in shell functions. Test for exception handling. See #196 .
2016-03-23 11:06:48 -04:00
039a2dd4dc
Made scale_factor optional for cli, added more comments, removed redundant code
2016-03-22 23:22:02 +00:00
ee43d8b920
Additional fixes for export size and flattening the geometry list
2016-03-22 18:56:04 +00:00
a2a1a08e3d
This adds a bunch of fixes when exporting svg's from geom's or cncjobs generated from drill files, also adds support for exporting drill files directly as svg's, and should capture any objects that use list within the solid_geometry attribute
2016-03-22 09:54:57 +00:00
10e9fa74c3
Added some additional checks for the types when exporting, and additional comments
2016-03-22 02:25:07 +00:00
17b4edb94b
Fixed the scaling issues with the svg export
2016-03-21 19:34:33 +00:00
b272329384
Initial scaling fixes for svg export
2016-03-21 17:25:46 +00:00
a5ff8c574a
Added initial svg export functionality
2016-03-21 11:38:14 +00:00
980638630d
cleanups
...
implement TclCommand.TclCommandSignaled as proof of concept (not usefull)
bypass using threads within obj.generatecncjob(use_thread = False, **args)
reimplement some more shell commands to OOP style
2016-03-19 15:13:07 +01:00
0f463a1fc2
Merged master into tcl-errors
2016-03-18 11:16:47 +01:00
7b29c52951
Merge branch 'master' of https://bitbucket.org/jpcgt/flatcam
2016-03-17 17:35:13 -04:00
a6f150a01d
Blocking in shell functions. See #196 .
2016-03-17 17:33:34 -04:00
2e51c1e9cd
hide showing 'None' if command end sucessfully
2016-03-17 10:54:01 +01:00
cd6700152c
draft for reimplementation of tcl commands to separated files/modules
2016-03-16 18:57:43 +01:00
4df46df19b
remove line
...
fix crazzy selfness ;)...
2016-03-11 20:32:48 +01:00
fd1c8afef9
implement basic set of tests for tcl_shell, need to be completed
2016-03-11 01:50:12 +01:00
6b527fa256
example howto handle Exceptions in shell
2016-03-10 16:01:50 +01:00
4f2f989bdf
set rules for TCL shell commands
...
implement TCL shell rules for:
drillcncjob,
millholes(renamed from drillcncjobgeometry),
exteriors,
interiors,
isolate
2016-03-07 11:05:42 +01:00
0f438db833
Several PEP8 cleanups in shell commands.
2016-03-03 14:51:36 +00:00
e3c43f6de1
remove Empty line
2016-03-02 00:49:51 +01:00
b4abef8317
remove Empty line
2016-03-02 00:46:23 +01:00
a8159dee16
"return -code error XXX" display error in better way
2016-03-02 00:45:49 +01:00
3fd9b361b8
implement raiseTclError and as example use it in drillcncjob
2016-03-02 00:41:54 +01:00
2cc3d811c5
remove duplicity when print error
2016-03-01 18:22:57 +01:00
fd869ad88c
remove raise, it does not kill app, but raise is unnecessary here
2016-03-01 18:15:38 +01:00
3878ddb782
display more precise answer if something in TCL shell fail
2016-02-29 22:22:23 +01:00
ced43df1bc
Catch when recent file type is not supported. See #192 .
2016-02-29 14:18:50 -05:00
dc374a8233
remove blank line
2016-02-25 16:33:44 +01:00
26189960ff
update help
2016-02-25 16:31:57 +01:00
9420aaad60
add multidepth and depthperpass to cncjob shell command
2016-02-25 00:03:19 +01:00
ba94aef069
fix aligndrill and also logicical errors in it
2016-02-24 22:37:23 +01:00
c3e544ac6c
FlatCAMObj - to_form,read_form,read_form_item cleanups for better debuging and cleanup Excellon merge method
...
FlatCAMApp - fix accidentall delete issue, change calling to understand FlatCAMObj changes
2016-02-23 12:21:57 +01:00
a827e184b7
rename del_polygon to subtract_polygon
...
correctly modify current geometry and dont leave it as path
fix shellcommands to follow new names
tweak geocutout to be able cut 8 gaps
2016-02-23 00:23:27 +01:00
23d5d7bd64
aligndrillgrid - fix offset direction -5 should be -x axis
2016-02-22 11:19:30 +01:00
f119f4de03
implement command aligndrillgrid, which creates grid of holes to bed
2016-02-22 10:50:06 +01:00
Marius Stanciu
mquezada
Damian Wrobel
Juan Pablo Caram
Zheng, Lei
Kamil Sopko
grbd
Kamil Sopko