9b4455a7a6
- Paint Tool - upgraded the UI and added the functionality that now adding a new tool is done by first searching the Tools DB for a suitable tool and if fails then it adds an default tool
...
- Paint Tool - on start will attempt to search in the Tools DB for the default tools and if found will load them from the DB
2020-08-28 11:56:59 +03:00
47be6ef30e
- Tool Isolation - small changes
2020-08-28 02:31:46 +03:00
c43b70cba5
- fixed a borderline issue in CNCJob UI Autolevelling - Voronoi polygons calculations
2020-08-28 02:25:05 +03:00
eee4595449
- some small fixes
2020-08-28 00:53:24 +03:00
cebffe34b1
- in Tools: Transform, SUb, RulesCheck, DistanceMin, Distance - moved the Tool UI in its own class
2020-08-28 00:41:03 +03:00
71ae6fe5e6
- Tool Isolation - made sure that the app can load from Tools Database only tools marked for Isolation tool
...
- Tool Isolation - on Tool start it will attempt to load the Preferences set tools by diameter from Tools Database. If it can't find one there it will add a default tool.
2020-08-27 23:20:30 +03:00
6c3364c9cc
- fixed some typos due of actions above
2020-08-27 21:44:17 +03:00
c45444a772
- in Tools: Film, Image, InvertGerber, Optimal, PcbWizard - moved the Tool UI in its own class
2020-08-27 21:37:00 +03:00
b3a22f3d0a
- Film Tool - moved the Tool UI in its own class
2020-08-27 21:06:44 +03:00
46ac265dc7
- Turkish translation strings were updated by the translator, Mehmet Kaya
2020-08-27 18:33:54 +03:00
5cd78d211e
- in Tool Cutout: modified the UI in preparation for adding the Mouse Bites feature
2020-08-27 17:29:58 +03:00
7eeda0347f
- in Tool Cutout fixed manual adding of gaps with thin gaps and plotting
...
- in Tool Cutout, when using fix gaps made sure that this feature is not activated if the value is zero
2020-08-27 03:29:52 +03:00
c99b20df7b
- in Tool Cutout, when using the Thin Gaps feature, the resulting geometry loose the extra color by toggling tool plot in Geometry UI Tools Table- fixed
2020-08-27 03:16:07 +03:00
19b5e100d5
- fixed the Tcl commands AddCircle, AddPolygon, AddPolyline and AddRectangle to have stored bounds therefore making them movable/selectable on canvas
2020-08-27 02:25:07 +03:00
66fcec49cc
- in Gerber UI done some optimizations
2020-08-27 00:56:55 +03:00
ffdcfb0b5d
- fixed crash in Properties Tool, when applied on a CNCJob object made out of an Excellon object (fixed issue #444 )
...
- in Properties Tool, for CNCJob objects made out of Excellon objects, added the information's from Tool Data
- in Properties Tool made sure that the set color for the Tree parents depends on the fact if the gray icons set are used (dark theme) or not
- Properties Tool - properties for a Gerber objects has the Tool Data now at the end of the information's
2020-08-27 00:17:14 +03:00
a823de9f98
- fixed issue when plotting a CNCJob object with multiple tools and annotations on by plotting annotations after all the tools geometries are plotted
2020-08-26 22:58:40 +03:00
9696e8faad
- NCC Tool - UI change: if the operation is Isolation then some of the tool parameters are disabled
2020-08-26 18:53:38 +03:00
be01e00898
- Isolation Tool - added ability to find the tool diameter that will guarantee total isolation of the currently selected Gerber object
2020-08-26 18:32:28 +03:00
d4c922cdf9
- Drilling Tool - when replacing Tools if more than one tool for one diameter is found, the application exit the process and display an error in status bar; some minor fixes
...
- Isolation Tool - remade the UI
- Isolation Tool - modified the add new tool method to search first in Tools Database for a suitable tool
2020-08-26 17:21:00 +03:00
e22ae1ad6c
- solved some deprecation warnings (Shapely module)
2020-08-26 15:10:36 +03:00
e658b61e53
- Geometry object - now plotting color for an individual tool can be specified
...
- in CutOut Tool - when using 'thin gaps' option then the cut parts are colored differently than the rest of the geometry in the Geometry object
2020-08-26 03:38:47 +03:00
86ec32b821
- fix for issue nr 2 in case of Drilling Tool. Need to check Isolation Tool, Paint Tool, NCC Tool
...
- Drilling Tool - UI changes
2020-08-26 01:01:27 +03:00
c3b99c3e33
- for Tools: Calculators, Calibration, Copper Thieving, Corners, Fiducials - moved the Tool UI in its own class
2020-08-25 18:23:38 +03:00
0d15130b40
- Tool Align Objects - moved the Tool Ui into its own class
2020-08-25 15:52:50 +03:00
08750a575c
- 2Sided Tool - finished the feature that allows picking an Excellon drill hole center as a Point mirror reference
2020-08-25 15:40:53 +03:00
9790f35b21
- commented some imports that I do not use (and the method using it)
2020-08-25 14:39:29 +03:00
ee664986b9
- added a Shapely 1.8dev0 wheel
2020-08-25 03:28:22 +03:00
c1c819276f
- in CNCJob UI Autolevelling - made the Voronoi calculations work even in the scenarios that previously did not work; it need a newer version of Shapely, currently I installed the GIT version
...
- in CNCJob UI Autolevelling - Voronoi polygons are now plotted
- in CNCJob UI Autolevelling - adding manual probe points now show some geometry (circles) for the added points until the adding is finished
2020-08-25 03:06:09 +03:00
96059c4b54
- in CNCJob UI Autolevelling - GRBL controller - fixed the send_grbl_command() method
2020-08-24 13:14:54 +03:00
f8eba0084d
- in CNCJob UI Autolevelling - GRBL controller - added the probing method
2020-08-24 02:13:13 +03:00
40682ea1e9
- made sure that when doing units conversion keep only the decimals specified in the application decimals setting (should differentiate between values and display?)
2020-08-24 01:05:14 +03:00
01df27f45f
- fixed issues in units conversion
...
- in CNCJob UI Autolevelling - changed how the probing code is generated and when
- changed some strings in CNCJob UI Autolevelling
2020-08-24 00:51:07 +03:00
3430d86dba
- in GUI element FCDoubleSpinner fixed an range issue
2020-08-23 16:57:59 +03:00
26ac43bd2e
- in CNCJob UI Autolevelling - autolevelling is made to be not available for cnc code generated with Roland or HPGL preprocessors
...
- in CNCJob UI Autolevelling - added a save dialog for the probing GCode
- added a new GUI element, a DoubleSlider
- in CNCJob UI Autolevelling - GRBL controller - Control: trying to add DoubleSlider + DoubleSpinner combo controls
2020-08-23 15:20:12 +03:00
5c960debf5
- CNCJob UI - Autoleveller feature - added a StyleSheet for the Pause/resume button
2020-08-22 03:54:07 +03:00
e07c9b9560
- minor changes
2020-08-22 03:38:20 +03:00
2deba3a8f9
- in CNCJob UI Autolevelling - GRBL controller - added handlers for the Zeroing and for Homing and for Pause/Resume; some UI optimizations
2020-08-22 03:34:45 +03:00
1b31abeb62
- in CNCJob UI Autolevelling - GRBL controller - Control: added a Origin button; changed the UI to have rounded rectangles
...
- in CNCJob UI Autolevelling - GRBL controller - Control: added feedrate and step size controls and added them in Preferences
2020-08-21 18:08:40 +03:00
35cdf4e4cb
- minor change
2020-08-21 00:16:35 +03:00
f610739390
- minor change
2020-08-20 01:20:01 +03:00
a75e7e5cf8
- in CNCJob UI Autolevelling - GRBL Sender - now only a single command can be sent
...
- in CNCJob UI Autolevelling - GRBL controller - changed the UI
- in CNCJob UI Autolevelling - added some VOronoi poly calculations
2020-08-19 17:20:05 +03:00
d62793c9bd
- in CNCJob UI Autolevelling - GRBL Control and Sender tabs are disabled when the serial port is disconnected
2020-08-19 04:44:50 +03:00
7285ee0b82
- in CNCJob UI Autolevelling - Grbl Connect tab colors will change with the connection status
2020-08-19 04:36:46 +03:00
33c633f0c4
- in CNCJob UI Autolevelling - sending GCode/GRBL commands is now threaded
2020-08-19 04:15:15 +03:00
3afcabe559
- in CNCJob UI Autolevelling - added handlers for GRBL report and for getting GRBL parameters
2020-08-19 03:44:16 +03:00
56ac489466
- in CNCJob UI Autolevelling - added handlers for: jogging, reset, sending commands
2020-08-19 02:26:35 +03:00
bdb0e71425
- in CNCJob UI Autolevelling - in COntrol section added buttons for Jog an individual axes zeroing
2020-08-18 17:51:25 +03:00
48660a0fd6
- in Doublesided Tool cleaned up the UI
2020-08-18 16:18:13 +03:00
d1733f1e1d
- in Doublesided Tool added some UI for Excellon hole snapping
2020-08-18 15:30:33 +03:00
Marius Stanciu