c1e079474d
- small changes
2019-09-06 00:40:07 +03:00
76138986bf
- fixed issue with loading files at start-up
...
- fixed issue with generating bounding box geometry for CNCJob objects
- added some more infobar messages and log.debug
- increased the priority for the worker tasks
2019-09-05 17:38:45 +03:00
d909b98130
- fixed bug in camblib.clear_polygon3() which caused that some copper clearing / paintings were not complete (some polygons were not processed) when the Straight Lines method was used
...
- some changes in NCC Tools regarding of the clearing itself
2019-09-03 23:15:29 +03:00
241cac8556
- finished the work on file extensions registration with FlatCAM. If the file extensions are deleted in the Preferences -> File Associations then those extensions are unregistered with FlatCAM
...
- fixed bug in NCC Tools and in SolderPaste Tool if in Edit -> Preferences only one tool is entered
2019-09-03 22:46:18 +03:00
e8aba2cdb7
- in Paint Tool and NCC Tool fixed the RMB click detection when Area selection is used
2019-09-03 16:11:21 +03:00
c0cab6ee23
- in NCC Tool added a warning in case there are isolation tools and if those isolation's are interrupted by an area or a box
...
- in Paint Tool made that the area selection is repeated until RMB click
2019-09-03 15:52:28 +03:00
50aacf21c2
- in NCC Tool now the Area adding is continuous until RMB is clicked (no key modifier is needed anymore)
2019-09-03 02:17:31 +03:00
a1d874b705
- fixed the isolation distance in NCC Tool for the tools with iso_op type
2019-09-03 01:47:32 +03:00
4dbf6b2fa9
- small changes in NCC tool regarding the usage of the V-shape tool
2019-09-03 01:32:10 +03:00
7ff8d893c0
- in NCC tool there is now a depth of cut parameter named 'Cut Z' which will dictate how deep the tool will enter into the PCB material
...
- in NCC tool added possibility to choose between the type of tools to be used and when V-shape is used then the tool diameter is calculated from the desired depth of cut and from the V-tip parameters
2019-09-03 01:13:03 +03:00
707a22c7a3
- in Properties Tool fixed the dimensions calculations (length, width, area) to work for multi-geo objects
2019-09-02 22:36:20 +03:00
60512f09a7
- in Properties Tool made threaded the calculation of convex_hull area and to work for multi-geo objects
...
- in NCC tool the type of tool that is used is transferred to the Geometry object
- in NCC tool the type of isolation done with the tools selected as isolation tools can now be selected and it has also an Edit -> Preferences entry
2019-09-02 21:39:46 +03:00
4b7115ca59
- added formatting for some strings in the app strings, making the future translations easier
2019-09-02 13:24:04 +03:00
7827cbfe6c
- fixed issue in NCC Tool when using area option
2019-09-02 00:53:02 +03:00
1e6eebefed
- added isolation capability in NCC tool for the rest-machining option
2019-09-02 00:43:34 +03:00
1295a94af1
- fixed open handlers
...
- fixed issue in NCC Tool where the tool table context menu could be installed multiple times
- added new ability to create simple isolation's in the NCC Tool
2019-09-02 00:14:28 +03:00
ba1e0bc94b
- fixed Tcl Command CncJob
...
- fixed crash due of Properties Tool trying to have a convex hull area on FlatCAMCNCJob objects which is not possible due of their nature
- modified Tcl Command SubtractRectangle
- fixed and modernized the Tcl Command Scale to be able to scale on X axis or on Y axis or on both and having as scale reference either the (0, 0) point or the minimum point of the bounding box or the center of the bounding box.
- fixed and modernized the Tcl Command Skew
2019-08-26 00:40:35 +03:00
61df272bbc
- added new capability in NCC Tool when the reference object is of Gerber type and fixed some newly introduced errors
2019-08-25 18:13:13 +03:00
354946025c
- finished adding the TclCommandCopperClear that can be called with alias: 'ncc'
2019-08-25 16:05:03 +03:00
8c0b8ed13d
- initial add of a new Tcl COmmand named CopperClear
...
- remade the NCC Tool in preparation for the newly added TclCommand CopperClear
2019-08-25 04:45:16 +03:00
87d1558977
- modified the Paint Tool. Now the Single Polygon and Area/Reference Object painting works with multiple tools too. The tools have to be selected in the Tool Table.
...
- remade the TclCommand Paint to work in the new configuration of the the app (the painting functions are now in their own tool, Paint Tool)
- fixed a bug in the Properties Tool
2019-08-24 19:55:03 +03:00
82b39d64d2
- fixed selection by dragging a selection shape in Geometry Editor
2019-08-24 05:08:27 +03:00
0e96be7d9a
- made PlotCanvas class inherit from VisPy Canvas instead of creating an instance of it (work of JP)
2019-08-24 04:45:25 +03:00
3fe31dec59
- modified CutOut Tool so now the manual gaps adding will continue until the user is clicking the RMB
...
- added ability to turn on/of the grid snapping and to jump to a location while in CutOut Tool manual gap adding action
2019-08-24 04:30:27 +03:00
e35cf7f02c
- fixed the issue with GUI entries content being deselected on right click in the box in order to copy the value
2019-08-23 21:01:23 +03:00
beda0df4a4
- for all the tools launched rom toolbar the behavior is modified: first click it will launch the tool; second click: if the Tool tab has focus it will close the tool but if another tab is selected, the tool will have focus
...
- modified the NCC Tool and Paint Tool to work multiple times after first launch
2019-08-23 19:30:33 +03:00
23f85b71e9
- in Paint Tool added ability to add multiple zones to paint when Area option is checked and the modifier key is pressed (either CTRL or SHIFT as set in Preferences). Right click of the mouse is an additional way to finish the job.
...
- in Paint Tool and NCC Tool, for the Area option, now mouse panning is allowed while adding areas to process
2019-08-23 16:44:41 +03:00
2fbb480f86
- in NCC Tool added ability to add multiple zones to clear when Area option is checked and the modifier key is pressed (either CTRL or SHIFT as set in Preferences). Right click of the mouse is an additional way to finish the job.
...
- fixed a bug in Excellon Editor that made that the selection of drills is always cumulative
2019-08-23 15:22:53 +03:00
f087c242f3
- in Tool Cutout tool I've added the possibility to create a cutout without bridge gaps; added the 'None' option in the Gaps combobox
2019-08-23 02:38:42 +03:00
211a7e4f6f
- in Tool Cutout for the manual gaps, right mouse button click will exit from the action of adding gaps
2019-08-23 02:25:25 +03:00
948c495447
- in Tool Cutout for the manual gaps, now the moving geometry that cuts gaps will orient itself to fit the angle of the cutout geometry
2019-08-23 02:15:45 +03:00
299ccb2eca
- fixed Tool Cutout so when the target Gerber is a single Polygon then the created manual geometry will follow the shape if shape is freeform
2019-08-22 22:56:02 +03:00
a92ecaf2de
- fixed some issues introduced in NCC Tool
2019-08-21 22:15:32 +03:00
fb62b58cd5
- small changes
2019-08-21 21:04:06 +03:00
47cd3dd043
- in NCC Tool added area selection feature
2019-08-21 03:24:38 +03:00
f338403130
- added new entry in Properties Tool which is the calculated Convex Hull Area (should give a more precise area for the irregular shapes than the box area)
...
- added some more strings in Properties Tool for the translation
2019-08-21 02:33:51 +03:00
50210820e2
- added feature in Paint Tool allowing the painting to be done on Gerber objects
...
- added feature in Paint Tool to set how (and if) the tools are sorted
- added Edit -> Preferences GUI entries for the above just added features
2019-08-21 02:13:10 +03:00
1d470bafb4
- replaced the layout from Grid to Form for the Reference objects comboboxes in Paint Tool and in NCC Tool
2019-08-21 01:09:57 +03:00
03c264886d
- added ability to do copper clearing through NCC Tool on Geometry objects also
2019-08-20 23:00:09 +03:00
07c31bba22
- fixed bug in Tool Sub that created issues when toggling visibility of the plots
2019-08-19 23:34:37 +03:00
1b6dd02217
- some mods in the Tool Sub
2019-08-19 20:57:23 +03:00
5cc16a03db
- updated the Edit -> Preferences to include also the Gerber Editor complete Preferences
...
- started to update the app strings to make it easier for future translations
2019-08-19 17:24:56 +03:00
36586aecce
- finished adding in Paint Tool the usage of an external object to set the extent of th area painted. For simple shapes (single Polygon) the shape can be anything, for the rest will be a convex hull of the reference object
...
- modified NCC tool so for simple objects (single Polygon) the external object used as reference can have any shape, for the other types of objects the copper cleared area will be the convex hull of the reference object
- modified the strings of the app wherever they contained the char seq <b> </b> so it is not included in the translated string
2019-08-18 14:17:46 +03:00
762d949461
- added GUI in Paint tool in beginning to add Paint by external reference object
2019-08-18 05:08:09 +03:00
531beb1d97
- in NCC Tool added a new parameter (radio button) that offer the choice on the order of the tools both in tools table and in execution of engraving; added as a parameter also in Edit -> Preferences -> Tools -> NCC Tool
2019-08-18 03:03:18 +03:00
eb4f504911
- fixed a bug in FCDoubleSpinner GUI element
...
- added a new parameter in NCC tool named offset. If the offset is used then the copper clearing will finish to a set distance of the copper features
2019-08-13 11:32:58 +03:00
ee3b38327e
- added new option in ToolSub: the ability to close (or not) the resulting paths when using tool on Geometry objects. Added also a new category in the Edit -> Preferences -> Tools, the Substractor Tool Options
2019-08-13 00:42:58 +03:00
cac92f75f2
- improved the FlatCAMGerber.isolate() function to work for geometry in the form of list and also in case that the elements of the list are LinearRings (like when doing the Exterior Isolation)
...
- in NCC Tool made sure that at each run the old objects are deleted
2019-08-12 22:39:38 +03:00
cf8a277825
- trying to fix reported bugs
2019-08-11 02:18:32 +03:00
a81471a7c8
- small change; debug message added
2019-08-10 15:19:47 +03:00
4a7ff22c8e
- fixed issue in the latest feature in NCC Tool: now it works also with reference objects made out of LineStrings (tool 'Path' in Geometry Editor)
2019-08-10 15:12:59 +03:00
eea66c0311
- added new feature in NCC Tool: now another object can be used as reference for the area extent to be cleared of copper
2019-08-10 14:59:29 +03:00
40dc73ce93
- finished added 'Area' type of Paint in Paint Tool
2019-08-10 01:15:31 +03:00
6f526acb4d
- added Exception handing for the case when the user is trying to save & overwrite a file already opened in another file
2019-08-09 22:39:13 +03:00
7a6c0541be
- started to work on Paint Area in Paint Tool
2019-08-07 17:10:48 +03:00
258d3463e7
- replaced setFixedWidth calls with setMinimumWidth
2019-08-07 14:29:59 +03:00
0ca9f3fed5
Merged in camellan/flatcam/Beta (pull request #173 )
...
Edit Russian translation
2019-08-03 20:13:29 +00:00
93f9a2f052
- solved bug such that the app is not crashing when some apertures in the Gerber file have no geometry. More than that, now the apertures that have geometry elements are bolded as opposed to the ones without geometry for which the text is unbolded
2019-08-03 22:53:44 +03:00
ab489df0b6
Update pot. Edit Russian translation.
2019-08-01 20:19:01 +04:00
8cadcb3837
- fixed another bug that when selecting an Excellon object after disabling it it crashed the app
...
- RELEASE 8.92
2019-08-01 00:37:11 +03:00
8e80ec156c
- fixed Panelize Tool to do panelization for multiple passes type of geometry that comes out of the isolation done with multiple passes
2019-07-29 02:36:29 +03:00
dce0d971cd
- updated the CutOut tool so it will work on single PCB Gerbers or on PCB panel Gerbers
2019-07-20 19:36:37 +03:00
e691c26b01
- fixed bug in FlatCAMObj.FlatCAMGeometry.ui_disconnect(); the widgets signals were not disconnected from handlers when required therefore the signals were connected in an exponential way
...
- some changes in the widgets used in the Selected tab for Geometry object
- some PEP8 cleanup in FlatCAMObj.py
- updated languages
- 60% progress in Spanish Google translation
2019-07-20 01:17:33 +03:00
2797a58165
- fixed bug in FlatCAMObj.FlatCAMGeometry.ui_disconnect(); the widgets signals were not disconnected from handlers when required therefore the signals were connected in an exponential way
...
- some changes in the widgets used in the Selected tab for Geometry object
- some PEP8 cleanup in FlatCAMObj.py
2019-07-19 21:46:11 +03:00
86287ea10f
- version date change
2019-07-17 14:58:43 +03:00
0e54d42c1b
- fixed issue in ToolMove regarding grid snapping recently introduced
2019-07-17 14:56:20 +03:00
ac2bf56e14
- added some more strings to the translateable ones, especially the radio button labels
...
- updated the .POT file and the available translations
- 51% progress in Spanish Google translation
2019-07-17 14:11:10 +03:00
e6153298bc
- PEP8 correction in flatcamTools
...
- merged the Brazilian-portuguese language from a pull request made by Carlos Stein
2019-07-16 16:22:20 +03:00
7c0a8b73e3
- some PEP8 corrections
2019-07-15 01:16:02 +03:00
729b7cb11c
- some changes in the app.on_togle_units() to make sure we don't try to convert empty parameters which may cause crashes on FlatCAM units change
...
- updated setup_ubuntu.sh file
- made sure to import certain libraries in some of the FlatCAM files and not to rely on chained imports
2019-07-09 13:58:33 +03:00
16525a606c
- fixed some log errors
2019-07-08 22:42:58 +03:00
769f92147a
- fixed bug that allowed empty tool in the tools generated in Geometry object
...
- fixed bug in Tool Cutout that did not allow the transfer of used cutout tool diameter to the cutout geometry object
2019-07-08 20:06:41 +03:00
5e401fd9f7
- some other bug in CutOut tool fixed
2019-07-05 20:45:15 +03:00
1edb049d86
- fixed bug in CutOut Tool
2019-07-05 12:13:53 +03:00
429753d211
- fixes issues with units conversion when the tool diameters are a list of comma separated values (NCC Tool, SolderPaste Tool and Geometry Object)
...
- fixed a "typo" kind of bug in SolderPaste Tool
- RELEASE 8.919
2019-06-23 00:04:49 +03:00
21a15e73bd
- fixed bug in Gerber isolation (Geometry expects now a value in string format and not float)
...
- fixed bug in Paint tool: now it is possible to paint geometry generated by External Isolation (or Internal isolation)
- fixed bug in editing a multigeo Geometry object if previously a tool was deleted
2019-06-22 20:17:45 +03:00
68bdfaf062
- some GUI layout optimizations in Edit -> Preferences
...
- added the possibility for multiple tool diameters in the Edit -> Preferences -> Geometry -> Geometry General -> Tool dia separated by comma
- fixed scaling for the multiple tool diameters in Edit -> Preferences -> Geometry -> Geometry General -> Tool dia, for NCC tools more than 2 and for Solderpaste nozzles more than 2
- fixed bug in CNCJob where the CNC Tools table will show always only 2 decimals for Tool diameters regardless of the current measuring units
- made the tools diameters decimals in case of INCH FlatCAM units to be 4 instead of 3
- fixed bug in updating Grid values whenever toggling the FlatCAM units and the X, Y Grid values are linked, bugs which caused the Y value to be scaled incorrectly
- set the decimals for Grid values to be set to 6 if the units of FlatCAM is INCH and to set to 4 if FlatCAM units are METRIC
- updated translations
- updated the Russian translate from 51% complete to 69% complete using the Yandex translation engine
2019-06-22 17:58:31 +03:00
8e71c93a62
Update Russian translate. Add translation strings. Update pot.
2019-06-09 22:09:15 +04:00
4b820d2bd3
Update pot-file. Edit Russian translation.
2019-06-09 01:32:20 +04:00
70e939ca36
Merge remote-tracking branch 'remotes/jpcgt/flatcam/Beta' into Beta
2019-06-08 23:16:41 +04:00
a5ffe475dd
- fixed bug in ToolCutout where creating a cutout object geometry from another external isolation geometry failed
...
- fixed bug in cncjob TclCommand where the gcode could not be correctly generated due of missing bounds params in obj.options dict
- fixed a hardcoded tolerance in FlatCAMGeometry.generatecncjob() and in FlatCAMGeometry.mtool_gen_cncjob() to use the parameter from Preferences
2019-06-07 23:14:00 +03:00
9e88950e65
Add translation strings. Update Russian translation.
2019-06-04 23:39:36 +04:00
2a30101bb0
- TclCommand Geocutout is now creating a new geometry object when working on a geometry, preserving also the origin object
2019-06-03 04:47:29 +03:00
8ee516ec14
- editing a multi geometry will no longer pop-up a Tcl window
...
- solved issue #292 where a new geometry renamed with many underscores failed to store the name in a saved project
- the name for the saved projects are updated to the current time and not to the time of the app startup
- some PEP8 changes related to comments starting with only one '#' symbol
2019-05-30 21:05:12 +03:00
41c6b0bde6
Update Russian language. Fix translate string
2019-05-29 13:29:42 +04:00
b273bdc3df
- Gerber Editor: finished a new tool: Eraser. It will erase certain parts of Gerber geometries having the shape of a selected shape.
2019-05-22 01:04:10 +03:00
f71645c96c
- fixed Tool PDF to work with the new Gerber apertures data structure
2019-05-19 00:44:52 +03:00
f779c74d0e
- fixed App.convert_any2gerber to work with the new Gerber apertures data structure
...
- fixed Tool Sub to work with the new Gerber apertures data structure
2019-05-18 18:22:02 +03:00
8ccd73b919
- added a new toggle option in Edit -> Preferences -> General Tab -> App Preferences -> "Open" Behavior. It controls which path is used when opening a new file. If checked the last saved path is used when saving files and the last opened path is used when opening files. If unchecked then the path for the last action (either open or save) is used.
2019-05-18 17:17:37 +03:00
630d9c733d
- remade the Properties Tool such that it works with the new Gerber data structure in the obj.apertures. Also changed the view for the Gerber object in Properties
...
- fixed issue with false warning that the Gerber object has no geometry after an empty Gerber was edited and added geometry elements
2019-05-18 00:17:37 +03:00
7f0a1695ef
- fixed an issue in the remade Cutout Tool where when applied on a single Gerber object, the Freeform Cutout produced no cutout Geometry object
2019-05-17 20:11:01 +03:00
3713a5d78f
- remade the Tool Cutout to work on panels
...
- remade the Tool Cutour such that on multiple applications on the same object it will yield the same result
2019-05-17 17:17:58 +03:00
e0001dc9b7
- some cleanup in ToolCutout
2019-05-17 03:04:28 +03:00
01c0f901ff
- some modifications to ToolCutout
2019-05-13 01:57:37 +03:00
5dd0ff7e14
- optimized Transform tool
2019-05-11 02:57:06 +03:00
8275750d3e
- fixed camlib.Gerber skew, rotate, offset, mirror functions to work for geometry stored in the Gerber apertures
2019-05-08 06:15:02 +03:00
6fb33ebc5e
- Gerber Export - finished
...
- added zoom fit for Set Origin command
- added move action for solid_geometry stored in the gerber_obj.apertures
2019-05-08 06:02:38 +03:00
b31f3b7587
- remade the Tool Paenlize GUI
2019-05-07 13:55:20 +03:00
f6106dd319
- updated the ToolPanelize tool so the Gerber panel of type FlatCAMGerber can be isolated like any other FlatCAMGerber object
...
- updated the ToolPanelize tool so it can be edited
2019-05-07 02:08:17 +03:00
b53c08f1e5
- finished the new Substract Tool
2019-04-30 20:22:46 +03:00
17bbbad72d
- progress in the new Substract Tool for Geometry Objects
2019-04-30 17:53:21 +03:00
bc981ab92c
- started to modify the Substract Tool to work on Geometry objects too
2019-04-30 15:52:12 +03:00
eb00176519
- renamed SilkScreen Tool to Substract Tool and move it's menu location in Edit -> Conversion
2019-04-30 13:16:32 +03:00
b8495f06ca
- solved the issue in Silkscreen Tool with losing some fragments of wires from silkscreen
2019-04-30 03:54:29 +03:00
0e94a2bd11
- finished the Silkscreen Tool but there are some limitations (some wires fragments from silkscreen are lost)
2019-04-30 03:50:01 +03:00
c3c37d1473
- finished the Silkscreen Tool
2019-04-30 03:29:46 +03:00
91e6cc0bff
- soled bug in Gerber Editor: the '0' aperture (the region aperture) had no size which created errors. Made the size to be zero.
...
- solved bug in editors: the canvas selection shape was not deleted on mouse release if the grid snap was OFF
- solved bug in Excellon Editor: when selecting a drill hole on canvas the selected row in the Tools Table was not the correct onw but the next highest row
2019-04-29 22:28:45 +03:00
8fcd75a8e4
- commented the camlib.alpha_shape() as it is not needed but require a huge package (scipy)
2019-04-26 18:02:07 +03:00
4c275b25af
- fixed Edit -> Copy as Geom function handler to work for Excellon objects, too
...
- made sure that the mouse pointer is restored to default on Editor exit
2019-04-25 20:42:56 +03:00
ddc2f2d873
- Geometry Editor: modified the intersection (if the selected shapes don't intersects preserve them) and substract functions (delete all shapes that were used in the process)
...
- work in the ToolSilk
2019-04-25 16:47:17 +03:00
c2334bd747
- Geometry Editor: modified the intersection (if the selected shapes don't intersects preserve them) and substract functions (delete all shapes that were used in the process)
...
- work in the ToolSilk
2019-04-25 16:26:31 +03:00
ae8111bf59
- wip
2019-04-25 01:52:29 +03:00
7fd8d99932
- wip
2019-04-25 01:23:36 +03:00
386e811c65
- New tool: Silkscreen Tool: I am trying to remove the overlapped geo with the soldermask layer from overlay layer; layed out the class and functions - not working yet
2019-04-25 01:13:37 +03:00
b11c67d453
- PDF import tool: solved a bug in parsing the rectangle subpath (an extra point was added to the subpath creating nonexisting geometry)
...
- PDF import tool: finished layer rendering multithreading
2019-04-24 22:26:13 +03:00
c0716f22e5
- wip for multithreading in PDF Tool
2019-04-24 16:37:16 +03:00
e4faa27351
- PDF import tool: working in making the PDF layer rendering multithreaded in itself (one layer rendered on each worker)
2019-04-24 14:11:15 +03:00
5f5b37eb98
- Fixed Measurement Tool to show the mouse coordinates on the status bar (it was broken at some point)
2019-04-23 16:10:34 +03:00
82a0287f4d
- PDF Import tool: added support for detection of circular geometry drawn with white color which means actually invisible color. When detected, FlatCAM will build an Excellon file out of those geoms.
...
- PDF Import tool: fixed storing geometries in apertures with the right size (before they were all stored in aperture D10)
2019-04-23 02:02:20 +03:00
d66d914cc3
- PDF Import tool: fixed bugs when drag & dropping PDF files on canvas the files geometry previously opened was added to the new one. Also scaling issues. Solved.
2019-04-22 20:33:03 +03:00
8f1a0c1fdc
- added PDF file as type in the Recent File list and capability to load it from there
...
- PDF's can be drag & dropped on the GUI to be loaded
2019-04-22 19:18:23 +03:00
7442af1b06
- PDF Import tool: added support for PDF files that embed multiple Gerber layers (top, bottom, outline, silkscreen etc). Each will be opened in it's own Gerber file. The requirement is that each one is drawn in a different color
2019-04-22 17:35:36 +03:00
8a2a48f668
- PDF import tool: added support for save/restore Graphics stack. Only for scale and offset transformations and for the linewidth. This is the final fix for Microsoft PDF printer who saves in PDF format 1.7
2019-04-22 15:35:21 +03:00
53444fc685
- fixed the PDF import tool to work with files generated by the Microsoft PDF printer (chained subpaths)
...
- in PDF import tool added support for paths filled and at the same time stroked ('B' and 'B*'commands)
- added a shortcut key for PDF Import Tool (ALT+Q) and updated the Shortcut list (also with the 'T' and 'R' keys for Gerber Editor where they control the bend in Track and Region tool and the 'M' and 'D' keys for Add Arc tool in Geometry Editor)
2019-04-22 03:28:05 +03:00
108f11eacf
- finished adding the PDF import tool although it does not support all kinds of outputs from PDF printers. Microsoft PDF printer is not supported.
2019-04-21 04:43:49 +03:00
52fceae054
- started to work on PDF import tool
2019-04-19 17:12:10 +03:00
d92750d124
- added ability to use ENTER key to finish tool adding in Editors, NCC Tool, Paint Tool and SolderPaste Tool.
2019-04-16 15:27:51 +03:00
348fe4f135
- finished ToolPcbWizard; it will autodetect the Excellon format, units from the INF file
2019-04-15 05:17:16 +03:00
db26895b5b
- working on a new tool to process automatically PcbWizard Excellon files which are generated in 2 files
2019-04-15 03:29:43 +03:00
fc1dfb8550
- cleaned up Measuring Tool
2019-04-14 16:59:20 +03:00
1332601624
- moved the key handler out of the Measurement tool to flatcamGUI.FlatCAMGui.keyPressEvent()
...
- Gerber Editor: started to add new function of poligonize which should make a filled polygon out of a shape
2019-04-14 15:16:37 +03:00
58abfcb7f7
- fixed above bug in Measurement Tool (but there is a TODO there)
2019-04-10 04:37:03 +03:00
942d9e2b01
- Gerber Editor: finished the selection on canvas; should be used as an template for the other Editors
...
- Gerber Editor: finished the Copy, Aperture Add, Buffer, Scale, Move including the Utility geometry
- Trying to fix bug in Measurement Tool: the mouse events don't disconnect
2019-04-10 03:56:56 +03:00
1f67158e35
Issue #284 - Sanitize the entered Overlap value for the Copper Clear Tool as well.
...
Change the "Overlap:" label occurrences to "Overlap Rate:" for clarity.
2019-04-03 12:41:25 -04:00
ece1538239
Issue #284 - Sanitize the entered Overlap value
2019-04-03 12:28:20 -04:00
309dbb132e
Issue #284 - Sanitize the entered Overlap value.
2019-04-03 12:20:53 -04:00
328677aa36
Issue #282 - Paint operations should ignore lines, after all only geometries that have a valid area should be painted.
2019-04-03 00:47:41 -04:00
bfd7cbdd44
- changed Measuring Tool to use the mouse click release instead of mouse click press; also fixed a bug when using the ESC key.
2019-04-01 00:07:26 +03:00
ecd6472220
- fixed issue #281 by making generation of a convex shape for the freeform cutout in Tool Cutout a choice rather than the default
...
- fixed bug in Tool Cutout, now in manual cutout mode the gap size reflect the value set
2019-03-31 21:52:27 +03:00
e0417b034b
- modified Gerber parser to copy the follow_geometry in the self.apertures
...
- modified the Properties Tool to show the number of elements in the follow_geometry for each aperture
- modified the copy functions to copy the follow_geometry and also the apertures if it's possible (only for Gerber objects)
2019-03-29 02:13:20 +02:00
ecc2c90f2a
- changed all the info messages that are of type warning, error or success so they have a space added after the keyword
...
- changed the Romanian translation by adding more diacritics
2019-03-29 00:26:00 +02:00
0002d32341
- fixed bug: after using Paint Tool shortcut keys are disabled
2019-03-26 22:39:49 +02:00
a964e6282d
- fixed an module import issue in NCC Tool
...
- minor change (optimization) of the CNCJob UI
- work in progress in German translation ~20%
2019-03-25 22:00:07 +02:00
74d1765a95
- added ability to create new scripts and open scripts in FlatCAM Script Editor
2019-03-18 22:59:13 +02:00
1c8c973971
- finished translation in Romanian
2019-03-18 01:23:36 +02:00
abfa78d898
- remade the layout in 2Sided Tool
...
- work in progress for translation in Romanian - 91%
2019-03-17 15:47:17 +02:00
fe6fa826ce
- remade the layout in 2Sided Tool
...
- work in progress for translation in Romanian - 91%
2019-03-17 04:35:04 +02:00
46da2dfd1e
- made the layout combobox current item from Preferences -> General window to reflect the current layout
...
- remade the POT translate file
- work in progress in translation for Romanian language 44%
- fix for showing tools by activating them from the Menu - final fix.
2019-03-16 00:59:59 +02:00
c0d21ee4e0
- made the layout combobox current item from Preferences -> General window to reflect the current layout
...
- remade the POT translate file
- work in progress in translation for Romanian language 44%
- fix for showing tools by activating them from the Menu - final fix.
2019-03-14 01:09:06 +02:00
ae0706620e
- reverted changes in Tools regarding the toggle effect - now they work as expected and added protection against AttributeError that can happen when switching from another tab.
2019-03-11 23:04:38 +02:00
Marius Stanciu
Camellan
Victor Benso