dab3a5f703
- fixed a bug where end_xy parameter in Drilling Tool was not used
...
- fixed an issue in Delete All method in the app_Main.py
2020-09-24 14:37:06 +03:00
d3ebb08d1f
- in CNCJob UI Autolevelling: on manual add of probe points, only voronoi diagram is calculated
2020-09-20 19:19:03 +03:00
f0e14640ae
- minor changes
2020-09-03 13:27:46 +03:00
af3d855285
- in CNCJob UI Autolevelling: prepared the app for bilinear interpolation
...
- in CNCJob UI Autolevelling: fixes in the UI
2020-09-03 12:48:50 +03:00
743885cf0f
- in CNCJob UI Autolevelling: changed the UI a bit
...
- added a bilinear interpolation calculation class from: https://github.com/pmav99/interpolation
- in CNCJob UI Autolevelling: made sure that the grid can't have less than 2 rows and 2 columns when using the bilinear interpolation or 1 row and 1 column when using the Voronoi polygons
2020-09-03 03:45:58 +03:00
75be9d7604
- small fixes #2
2020-09-03 01:48:56 +03:00
12012c8e49
- small fixes
2020-09-03 01:36:21 +03:00
06c526db39
- in CNCJob UI Autolevelling - GRBL controller - added a way to save a GRBL height map
...
- in CNCJob UI Autolevelling: added the UI for choosing the method used for the interpolation used in autolevelling
2020-09-03 00:37:10 +03:00
906ab83396
- in CNCJob UI Autolevelling: first added point when manual adding of probe points is auto added in origin before adding first point
...
- in CNCJob UI Autolevelling: temp geo for adding points in manual mode is now painted in solid black color and with a smaller diameter
2020-09-02 22:08:28 +03:00
ab414ce348
- in CNCJob UI Autolevelling: solved some small errors: when manual adding probe points dragging the mouse with left button pressed created selection rectangles; detection of click inside the solid geometry was failing
...
- in CNCJob UI Autolevelling: in manual adding of probe points make sure you always add a first probe point in origin
2020-09-02 01:26:18 +03:00
42c5a69bfa
- in CNCJob UI Autolevelling: made sure that plotting a Voronoi polygon is done only for non-None polygons
...
- in CNCJob UI Autolevelling : in manual mode, Points can be chosen only when clicking inside the object to be probed
- in CNCJob UI Autolevelling: made sure that plotting a Voronoi polygon is done only for non-None polygons
- in CNCJob UI Autolevelling: remade the probing points generation so they could allow bilinear interpolation
2020-08-31 21:47:11 +03:00
c43b70cba5
- fixed a borderline issue in CNCJob UI Autolevelling - Voronoi polygons calculations
2020-08-28 02:25:05 +03:00
c99b20df7b
- in Tool Cutout, when using the Thin Gaps feature, the resulting geometry loose the extra color by toggling tool plot in Geometry UI Tools Table- fixed
2020-08-27 03:16:07 +03:00
ffdcfb0b5d
- fixed crash in Properties Tool, when applied on a CNCJob object made out of an Excellon object (fixed issue #444 )
...
- in Properties Tool, for CNCJob objects made out of Excellon objects, added the information's from Tool Data
- in Properties Tool made sure that the set color for the Tree parents depends on the fact if the gray icons set are used (dark theme) or not
- Properties Tool - properties for a Gerber objects has the Tool Data now at the end of the information's
2020-08-27 00:17:14 +03:00
a823de9f98
- fixed issue when plotting a CNCJob object with multiple tools and annotations on by plotting annotations after all the tools geometries are plotted
2020-08-26 22:58:40 +03:00
e658b61e53
- Geometry object - now plotting color for an individual tool can be specified
...
- in CutOut Tool - when using 'thin gaps' option then the cut parts are colored differently than the rest of the geometry in the Geometry object
2020-08-26 03:38:47 +03:00
c1c819276f
- in CNCJob UI Autolevelling - made the Voronoi calculations work even in the scenarios that previously did not work; it need a newer version of Shapely, currently I installed the GIT version
...
- in CNCJob UI Autolevelling - Voronoi polygons are now plotted
- in CNCJob UI Autolevelling - adding manual probe points now show some geometry (circles) for the added points until the adding is finished
2020-08-25 03:06:09 +03:00
96059c4b54
- in CNCJob UI Autolevelling - GRBL controller - fixed the send_grbl_command() method
2020-08-24 13:14:54 +03:00
f8eba0084d
- in CNCJob UI Autolevelling - GRBL controller - added the probing method
2020-08-24 02:13:13 +03:00
01df27f45f
- fixed issues in units conversion
...
- in CNCJob UI Autolevelling - changed how the probing code is generated and when
- changed some strings in CNCJob UI Autolevelling
2020-08-24 00:51:07 +03:00
26ac43bd2e
- in CNCJob UI Autolevelling - autolevelling is made to be not available for cnc code generated with Roland or HPGL preprocessors
...
- in CNCJob UI Autolevelling - added a save dialog for the probing GCode
- added a new GUI element, a DoubleSlider
- in CNCJob UI Autolevelling - GRBL controller - Control: trying to add DoubleSlider + DoubleSpinner combo controls
2020-08-23 15:20:12 +03:00
e07c9b9560
- minor changes
2020-08-22 03:38:20 +03:00
2deba3a8f9
- in CNCJob UI Autolevelling - GRBL controller - added handlers for the Zeroing and for Homing and for Pause/Resume; some UI optimizations
2020-08-22 03:34:45 +03:00
1b31abeb62
- in CNCJob UI Autolevelling - GRBL controller - Control: added a Origin button; changed the UI to have rounded rectangles
...
- in CNCJob UI Autolevelling - GRBL controller - Control: added feedrate and step size controls and added them in Preferences
2020-08-21 18:08:40 +03:00
35cdf4e4cb
- minor change
2020-08-21 00:16:35 +03:00
f610739390
- minor change
2020-08-20 01:20:01 +03:00
a75e7e5cf8
- in CNCJob UI Autolevelling - GRBL Sender - now only a single command can be sent
...
- in CNCJob UI Autolevelling - GRBL controller - changed the UI
- in CNCJob UI Autolevelling - added some VOronoi poly calculations
2020-08-19 17:20:05 +03:00
d62793c9bd
- in CNCJob UI Autolevelling - GRBL Control and Sender tabs are disabled when the serial port is disconnected
2020-08-19 04:44:50 +03:00
7285ee0b82
- in CNCJob UI Autolevelling - Grbl Connect tab colors will change with the connection status
2020-08-19 04:36:46 +03:00
33c633f0c4
- in CNCJob UI Autolevelling - sending GCode/GRBL commands is now threaded
2020-08-19 04:15:15 +03:00
3afcabe559
- in CNCJob UI Autolevelling - added handlers for GRBL report and for getting GRBL parameters
2020-08-19 03:44:16 +03:00
56ac489466
- in CNCJob UI Autolevelling - added handlers for: jogging, reset, sending commands
2020-08-19 02:26:35 +03:00
d1733f1e1d
- in Doublesided Tool added some UI for Excellon hole snapping
2020-08-18 15:30:33 +03:00
495947f8c5
- in CNCJob UI Autolevelling - made autolevelling checkbox state persistent between app restarts
2020-08-17 02:31:51 +03:00
115e882614
- in CNCJob UI Autolevelling - finished the Import Height Map method
2020-08-17 02:09:44 +03:00
3ef47da370
- in CNCJob UI Autolevelling - Added entries in Preferences
2020-08-17 00:40:45 +03:00
cd34223f6d
- minor string change
2020-08-16 23:58:04 +03:00
e0ec8ac44f
- in CNCJob UI Autolevelling - Probing GCode has now a header
2020-08-16 23:49:53 +03:00
fd895e3c21
- in CNCJob UI Autolevelling - updated the UI with controls for probing GCode parameters and added signals and slots for the UI
...
- in CNCJob UI Autolevelling - added a mini gcode sender for the GRBL to be able to send the probing GCode and get the height map (I may make a small and light app for that so it does not need to have FlatCAM on the GCode sender PC)
- in CNCJob UI Autolevelling finished the probing GCode generation for MACH/LinuxCNC controllers; this GCode can also be viewed
2020-08-16 23:05:31 +03:00
cc7c525be1
- in CNCJob UI finished working on adding test points in Manual mode
2020-08-14 17:04:16 +03:00
5af8918441
- in CNCJob UI worked on the UI for the Autolevelling
...
- in CNCJob UI finished working on adding test points in Grid mode
2020-08-14 12:46:27 +03:00
298976f32e
- CNCJob object - working in generating Voronoi diagram for autolevelling
2020-08-14 02:03:03 +03:00
776034d1b1
- Tool Cutout - some work in gaps thickness control for the free form cutout
2020-08-13 22:38:39 +03:00
eb28d28ea2
- GCode Editor - modified the UI
2020-08-03 23:20:41 +03:00
44411cdc82
- GCode Editor - closing the Editor will close also the Code Editor Tab
...
- cleanup of the CNCJob UI; added a checkbox to signal if any append/prepend gcode was set in Preferences (unchecking it will override and disable the usage of the append/prepend GCode)
- the start Gcode is now stored in the CNCJob object attribute gc_start
- GCode Editor - finished adding the ability to select a row in the Tools table and select the related GCode
2020-08-02 16:27:30 +03:00
b8fb64a143
- added a Laser preprocessor named 'Z_laser' which will change the Z to the Travel Z on each ToolChange event allowing therefore control of the dot size
...
- by default now a new blank Geometry object created by FlatCAM is of type multigeo
- made sure that optimizations of lines when importing SVG or DXF as lines will not encounter polygons but only LinesStrings or LinearRings, otherwise having crashes
- fixed the import SVG and import DXF, when importing as Geometry to be imported as multigeo tool
- fixed the import SVG and import DXF, the source files will be saved as loaded into the source_file attribute of the resulting object (be it Geometry or Gerber)
2020-07-23 00:44:33 +03:00
cf78211a6f
- wip in the GCode Editor
2020-07-22 17:08:40 +03:00
9e8ab610b4
- working on a proper GCode Editor
2020-07-22 15:49:52 +03:00
65d4f70b21
- made sure there are no issues when plotting the Excellon object in one thread and trying to build the UI in another by using a signal
2020-07-21 15:58:22 +03:00
786423eb57
- fixed some issues in Excellon Editor due of recent changes
...
- moved the Gerber colors fill in the AppObject.on_object_created() slot and fixed some minor issues here
2020-07-21 15:52:53 +03:00
687efd1fc0
- Excellon UI: made sure that when the Multicolor checkbox is unchecked, the color is updated in the Color column of the tools table
2020-07-21 07:20:14 +03:00
617b483267
- Excellon UI: added a column which will color each row/tool of that column in the color used when checking Multicolor checkbox
2020-07-21 06:49:49 +03:00
e147ef1994
- Excellon UI: fixed plot checkbox performing an extra plot function which was not required
2020-07-21 06:12:44 +03:00
e57820f707
- fixed MultiColor checkbox in Excellon Object to work in Legacy Mode (2D)
...
- modified the visibility change in Excellon UI to no longer do plot() when doing visibility toggle for one of the tools but only a visibility change in the shapes properties
2020-07-21 06:01:04 +03:00
a3e1570747
- added a control in Preferences -> Gerber Tab for Gerber colors storage usage
...
- made sure that the defaults on first install will set the number of workers to half the number of CPU's on the system but no less than 2
2020-07-21 00:04:18 +03:00
ebdb2b3ca0
- fixed a bug in the FlatCAMGerber.on_mark_cb_click_table() method when moving a Gerber object
...
- added a way to remember the colors set for the Gerber objects; it will remember the order that they were loaded and set a color previously given
2020-07-20 19:21:17 +03:00
8409c74e23
- added some icons in the Code Editor
...
- replaced some icons in the app
- in Code Editor, when changing text, the Save Code button will change color (text and icon) to red and after save it will revert the color to the default one
- in Code Editor some methods rework
2020-07-18 00:26:03 +03:00
144a89f686
- added a new method for GCode generation for Geometry objects
...
- added multiple algorithms for path optimization when generating GCode from an Geometry object beside the original Rtree algorithm: TSA, OR-Tools Basic, OR-Tools metaheuristics
- added controls for Geometry object path optimization in Preferences
2020-07-16 04:55:58 +03:00
5b80760ba7
- Tool Drilling - brushing through code and solved the report on estimation of execution time
...
- Tool Drilling - more optimizations regarding of using Toolchange as opposed to not using it
- modfied the preprocessors to work with the new properties for Excellon objects
- added to preprocessors information regarding the X,Y position at the end of the job
- Tool Drilling made sure that on Toolchange event after toolchange event the tool feedrate is set
2020-07-15 20:16:57 +03:00
7b891900be
- added Editor Push buttons in Geometry and CNCJob UI's
2020-07-15 03:31:39 +03:00
5748eb049b
- Tools Database - remade the UI
...
- made sure that the serializable attributes are added correctly and only once (self.ser_attrs)
2020-07-14 16:46:01 +03:00
5badd7a26b
- Gerber UI - optimized the mark shapes to use only on ShapeCollection
2020-07-14 14:20:19 +03:00
c6baa8ca60
- Multiple Tools fix - fixed issue with converting slots to drills selection being cleared when togglinh all rows by clicking on the header
...
- Multiple Tools fix - fixes for when having multiple tools selected which created issues in tool tables for many tools
2020-07-13 15:49:11 +03:00
22d05935e8
- fixed a bug in Tools Database: due of not disconnecting the signals it created a race that was concluded into a RuntimeError exception (an dict changed size during iteration)
...
- Drilling Tool - working in adding tools auto-load from Tools DB
- some updates to the Excellon Object options
- Drilling Tool - manual add from Tools DB is working
2020-07-13 03:04:44 +03:00
0d886955f8
- when creating a new FlatCAM object, the options will be updated with FlatCAM tools properties that relate to them
...
- updated the Tools DB class by separating the Tools DB UI into it's own class
- Tools DB - added the parameters for Drilling Tool
2020-07-12 18:30:24 +03:00
329bb04b3c
- Gerber UI - optimized the mark shapes to use only on ShapeCollection
2020-07-12 01:36:21 +03:00
13bcc036df
- moved all Excellon Advanced Prefeences to Drilling Tool Preferences
...
- updated Drilling Tool to use the new settings
- updated the Excellon Editor: the default_data dict is populated now on Editor entry
- Excellon Editor: added a new functionality: conversion of slots to drills
- Excellon UI: added a new feature that is grouped in Advanced Settings: a toggle tools table visibility checkbox
2020-07-11 01:42:44 +03:00
f53ffe54d9
- Tool Drilling - fixed incorrect annotations in CNCJob objects generated; one drawback is that now each tool (when Toolchange is ON) has it's own annotation order which lead to overlapping in the start point of one tool and the end of previous tool
...
- Tool Drilling - refactoring methods and optimizations
2020-07-10 17:05:32 +03:00
24192540d7
- in Gerber and Excellon UI added buttons to start the Editor
...
- in all Editors Selected Tab added a button to Exit the Editor
2020-07-10 05:03:54 +03:00
0dee41e03c
- Tool Drilling - moved some of the Excellon Preferences related to drilling operation to it's own group Drilling Tool Options
...
- optimized the CNCJob UI to look like other parts of the app
2020-07-10 04:39:25 +03:00
494963ed04
- working in cleaning up the Excellon UI (Selected Tab)
...
- finished the clean-up in Excellon UI
2020-07-09 05:58:11 +03:00
fd3fe0530c
- CNCJob object - now it is possible for CNCJob objects originated from Excellon objects, to toggle the plot for a selection of tools
2020-07-09 04:34:23 +03:00
4216333645
- Tool Drilling - remade the methods used to generate GCode from Excellon, to parse the GCode. Now the GCode and GCode_parsed are stored individually for each tool and also they are plotted individually
...
- Tool Drilling now works - I still need to add the method for converting slots to drill holes
2020-07-09 03:53:41 +03:00
a0fea17aed
- working on Tool Drilling
2020-07-08 21:35:24 +03:00
5e9455991f
- added as ToolTip for the the Preprocessor combobox items, the actual name of the items
2020-07-08 16:20:48 +03:00
6edd7f051a
- Tool Drilling - working on the UI
...
- Tool Drilling - added more tool parameters; laying the ground for adding "Drilling Slots" feature
2020-07-08 15:51:03 +03:00
e7c369ab8e
- updated the Panelize Tool to save the source code for the panelized Excellon objects so it can be saved from the Save project tab context menu entry
...
- updated the Panelize Tool to save the source code for the panelized Geometry objects as DXF file
2020-07-07 15:52:58 +03:00
27216c52e2
- modified the Gerber export method to take care of the situation where the exported Gerber file is a SVG/DXF file imported as Gerber
2020-07-02 21:35:34 +03:00
a833b3e3d4
- wip
2020-06-21 08:00:36 +03:00
79fec61934
- fixed bug in the Cutout Tool that did not allowed the manual cutous to be added on a Geometry created in the Tool
...
- fixed bug that made the selection box show in the stage of adding manual gaps
- updated Cutout Tool UI
- Cutout Tool - in manual gap adding there is now an option to automatically turn on the big cursor which could help
- Cutout Tool - fixed errors when trying to add a manual gap without having a geometry object selected in the combobox
2020-06-18 14:26:24 +03:00
c839428a83
- added the multi-save capability if multiple CNCJob objects are selected in Project tab but only if all are of type CNCJob
2020-06-17 00:38:19 +03:00
949c265378
- changed the data structure for the Excellon object; modified the Excellon parser and the Excellon object class
...
- fixed partially the Excellon Editor to work with the new data structure
- fixed Excellon export to work with the new data structure
- fixed all transformations in the Excellon object attributes; still need to fix the App Tools that creates or use Exellon objects
2020-06-16 03:47:26 +03:00
c44f395625
- made the coordinates / delta coordinates / grid toolbar / actions toolbar visibility an option, controlled from the infobar (Status bar) context menu. How it's at app shutdown it's restored at the next application start
2020-06-13 19:50:55 +03:00
69d0b3ad3f
- updated the FCTable GUI element to work correctly when doing drag&drop for the rows
...
- updated the Geometry UI to work with the new FCTable
2020-06-13 18:06:33 +03:00
e85b6f8d87
- Geometry UI - made again the header clickable and first click selects all rows, second click will deselect all rows.
...
- Geometry UI - minor updates in the layout; moved the warning text to the tooltip of the generate_cncjob button
- Geometry UI - working in making the modification of tool parameters such that if there is a selection of tools the modification in the Tool parameters will be applied to all selected
2020-06-13 00:17:17 +03:00
ee4b765225
- finished tool reordering in Geometry UI
2020-06-12 04:47:08 +03:00
3ef6abaa71
- continue - work in tool reordering in Geometry UI
2020-06-10 12:31:11 +03:00
7f082760bb
- working on the tool reordering in the Geometry UI
2020-06-10 10:25:48 +03:00
a3fd6e9f87
- fixed bug in the Isolation Tool that in certain cases an empty geometry was present in the solid_geometry which mae the CNCJob object generation to fail. It happen for Gerber objects created in the Gerber Editor
2020-06-10 03:27:53 +03:00
0643971b01
- added ability to merge tools when merging Geometry objects if they share the same attributes like: diameter, tool_type or type
...
- added a control in Edit -> Preferences -> Geometry to control if to merge/fuse tools during Geometry merging
2020-06-10 00:23:08 +03:00
24d639e1de
- added a protection when trying to edit a Geometry object that have multiple tools but no tool is selected
2020-06-09 00:02:16 +03:00
850b80bb41
- more refactoring in the app Editors
2020-06-08 19:53:31 +03:00
039500b43f
- fixed issue with trying to access GUI from different threads by adding a new signal for printing to shell messages
2020-06-07 15:30:46 +03:00
ea1b47bf89
- added a GUI element in the Preferences to control the possibility to edit with mouse cursor objects in the Project Tab. It is named: "Allow Edit"
2020-06-07 00:19:33 +03:00
4b01fd5473
- updated the Italian translation - contribution by Golfetto Massimiliano
...
- made the timing for the object creation to be displayed in the shell
2020-06-04 02:53:06 +03:00
2eecb20e95
- remade file names in the app
...
- fixed the issue with factory_defaults being saved every time the app start
- fixed the preferences not being saved to a file when the Save button is pressed in Edit -> Preferences
- fixed and updated the Transform Tools in the Editors
2020-06-03 20:35:59 +03:00
Marius Stanciu