e091fd232d
- added (and commented) an experimental FlatCAMObj.FlatCAMGerber.plot_apertures()
2019-02-14 00:09:48 +02:00
15b533f25e
- made the Gerber aperture table not visibile as default and added a checkbox that can toggle the visibility
...
- fixed issue with plotting in CNCJob; with Plot kind set to something else than 'all' when toggling Plot, it was defaulting to kind = 'all'
2019-02-13 23:48:43 +02:00
53e8e4d486
- made the Gerber aperture table hidden by default and added a checkbox to show it
2019-02-13 22:34:56 +02:00
f3b1b45968
- changed the layout in the Selected Tab UI
...
- started to add apertures table support
- finished Gerber aperture table display
2019-02-13 17:26:21 +02:00
899e8b433d
- added new parameter for Excellon Object in Preferences: Fast Retract. If the checkbox is checked then after reaching the drill depth, the drill bit will be raised out of the hole asap.
...
- started to work on GUI forms simplification
- changed the Preferences GUI for Geometry and Excellon Objects to make a difference between parameters that are changed often and those that are not.
2019-02-13 14:30:29 +02:00
c94679919d
- stored solid_geometry of Excellon object in the self.tools dictionary
...
- finished the solid_geometry restore after edit in Excellon Editor
- finished plotting selection for each tool in the Excellon Tool Table
- fixed the camlib.Excellon.bounds() function for the new type of Excellon geometry therefore fixed the canvas selection, too
2019-02-13 01:22:09 +02:00
02793f7ae2
- starting to work on storing the solid_geometry for each tool in part in Excellon Object
2019-02-12 16:55:43 +02:00
9b61e4cc37
- finished work on Offset parameter in Excellon Object (Excellon Editor, camlib, FlatCAMObj updated to take this param in consideration)
...
- fixed a bug where in Excellon editor when editing a file, a tool was automatically added. That is supposed to happen only for empty newly created Excellon Objects.
2019-02-12 15:12:12 +02:00
d0641458e4
- whenever a FlatCAM tool is activated, if the notebook side is hidden it will be unhidden
...
- reactivated the Voronoi classed
- added a new parameter named Offset in the Excellon tool table - work in progress
2019-02-12 04:00:11 +02:00
4609f61546
- changes in Toolchange_Probe_MACH3 postprocessor file
2019-02-10 23:36:59 +02:00
8cedc0cad9
- added a pause and message/warning to do a rough zero for the Z axis, in case of Toolchange_Probe_MACH3 postprocessor file
2019-02-10 23:04:37 +02:00
e8b9555a94
- added a strong focus to the object_name entry in the Selected tab
...
- the keypad keyPressed are now detected correctly
2019-02-10 22:55:51 +02:00
258f877865
- changed some log messages
2019-02-10 14:02:53 +02:00
f01ac4483a
- adjusted the postprocessor files so the Spindle Off command (M5) is done before the move to Toolchange Z
...
- adjusted the Toolchange Manual postprocessor file to have more descriptive messages on the toolchange event
2019-02-10 13:42:22 +02:00
f35994a712
- repurposed shortcut key 'Delete' to delete tools in tooltable when the mouse is over the Seleted tab (with Geometry inside) or in Tools tab (when NCC Tool or Paint Tool is inside). Or in Excellon Editor when mouse is hovering the Selected tab selecting a tool, 'Delete' key will delete that tool, if on canvas 'Delete' key will delete a selected shape (drill). In rest, will delete selected objects.
2019-02-10 02:09:05 +02:00
b68a010bde
- the SELECTED type of messages are no longer printed to shell from 2 reasons: first, too much spam and second, issue with displaying html
...
- on set_zero function and creation of new geometry or new excellon there is no longer a zoom fit
2019-02-09 19:44:01 +02:00
c59da8669b
Merged in test_beta_8.907 (pull request #132 )
...
Test beta 8.907
2019-02-09 15:00:09 +00:00
59e12cf295
- fixed an error in Excellon Editor -> add drill array that could appear by starting the function to add a drill array by shortcut before any mouse move is registered while in Editor
...
- changed the messages from status bar on new object creation/selection
- in Geometry Editor fixed the handler for the Rotate shortcut key ('R')
2019-02-09 16:00:47 +02:00
8665b1d8c3
- added into Preferences the Calculator Tools
...
- made the Preferences window scrollable on the horizontal side (it was only vertically scrollable before)
- made invisible some buttons that could mislead (the ones for slots converted to drills which I deem unsafe)
2019-02-09 11:52:08 +02:00
d17fc12196
- added a protection for when saving a file first time, it require a saved path and if none then it use the current working directory
2019-02-09 01:58:08 +02:00
8b0a9a429a
- fixed some errors
2019-02-09 01:47:59 +02:00
da7029dc0b
- if trying to add a tool using shortcut key 'T' with value zero the app will react with a message telling to use a non-zero value.
2019-02-09 01:18:03 +02:00
8f000c0a18
- in Excellon Editor added a protection for Tool_dia field in case numbers using comma as decimal separator are used. Also added a QDoubleValidator forcing a number with max 4 decimals and from 0.0000 to 9.9999
...
- in Excellon Editor added a shortcut key 'T' that popup a window allowing to enter a new Tool with the set diameter
- in App added a shortcut key 'T' that popup a windows allowing to enter a new Tool with set diameter only when the Selected tab is on focus and only if a Geometry object is selected
- changed the shortcut key for Transform Tool from 'T' to 'ALT+T'
- fixed bug in Geometry Selected tab that generated error when used tool offset was less than half of either total length or half of total width. Now the app signal the issue with a status bar message
- added Double Validator for the Offset value so only float numbers can be entered.
- in App added a shortcut key 'T' that popup a windows allowing to enter a new Tool with set diameter only when the Tool tab is on focus and only if a NCC Tool or Paint Area Tool object is installed in the Tool Tab
2019-02-09 00:08:54 +02:00
824b1a95ab
- moved all shortcut keys handlers from Editors to the keyPressEvent() handler from FLatCAMGUI
2019-02-08 16:57:51 +02:00
2be35e4248
- fixed errors in Toggle Axis
...
- fixed error with shortcut key triggering twice the keyPressEvent when in the Project List View
2019-02-08 15:55:32 +02:00
2524e6bd59
- minor GUI changes
2019-02-08 15:24:47 +02:00
f39fea072c
- when shortcut keys 1, 2, 3 (tab selection) are activated, if the splitter left side (the notebook) is hidden it will be mae visible
...
- changed the menu entry Toggle Grid name to Toggle Grid Snap
2019-02-08 14:55:50 +02:00
0bc018bbe0
- added an empty message when deselection is done by shortcut key Escape
2019-02-07 23:13:11 +02:00
5b75d416ec
- moved some graphical classes out of Tool Shell to GUIElements.py where they belong
...
- when selecting an object on canvas by single click, it's name is displayed in status bar. When nothing is selected a blank message (nothing) it's displayed
- in Move Tool I've added the type of object that was moved in the status bar message
- color coded the status bar bullet to blue for selection
- the name of the selected objects are displayed in the status bar color coded: green for Gerber objects, Brown for Excellon, Red for Geometry and Blue for CNCJobs.
2019-02-07 22:37:51 +02:00
c888303146
- added a new function and the shortcut 'leftquote' (left of Key 1) for toggle of the notebook section
...
- changed the Shortcut list shortcut key to F3
2019-02-07 20:39:37 +02:00
07ae0c9c8b
- small changes in Tools layout
2019-02-07 17:03:06 +02:00
ab026a1a9d
- added a disable menu entry in the canvas contextual menu
2019-02-07 03:16:29 +02:00
6c6a802afb
- commented some debug messages
...
- imported speedups for shapely
2019-02-07 01:36:37 +02:00
700222d5dc
- in Paint Tool, when painting single polygon, when clicking on canvas for the polygon there is no longer a selection of the entire object
2019-02-07 00:53:51 +02:00
1a8db0b5d9
- fixed the Tcl Command Geocutout to work with Gerber objects too (besides Geometry objects)
2019-02-06 22:32:32 +02:00
2ee80990e5
- added a new function (and shortcut key Escape) that when triggered it deselects all selected objects and delete the selection box(es)
...
- fixed bug in Excellon Gcode generation that made the toolchange X,Y always none regardless of the value in Preferences
2019-02-06 21:37:50 +02:00
9dfbae7515
- added plot kind for CNC Job in the App Preferences
2019-02-06 20:29:53 +02:00
05ae92726c
- renamed the theme to layout because it is really a layout change
...
- combined the geocutout and cutout_any TCL commands - work in progress
2019-02-06 16:59:17 +02:00
8bbb9ba534
- all kwy shortcuts work across the entire application; started to move all the shortcuts definitions in FlatCAMGUI.keyPressEvent()
2019-02-06 16:23:09 +02:00
67d089832e
- all kwy shortcuts work across the entire application; started to move all the shortcuts definitions in FlatCAMGUI.keyPressEvent()
2019-02-06 14:44:16 +02:00
28f11ef55f
- small bugs related to shortcut keys solved
2019-02-06 14:27:11 +02:00
dedf8c09de
- fixed the name self-insert in save dialog file for GCode; added protection in case the save path is None
...
- fixed FlatCAM crash when trying to make drills GCode out of a file that have only slots.
- made the shell toggle shortcut key work when focused on Selected Tab; toggle units shortcut also
- changed the messages for Units COnversion
2019-02-06 14:03:59 +02:00
b589292c0f
- fixed bug in Excellon Slots milling: a value of a dict key was a string instead to be an int. A cast to integer solved it.
2019-02-06 02:17:29 +02:00
299a6585a7
- done a regression on Tool Tab default text. It somehow delete Tools in certain scenarios so I got rid of it
...
- fixed bug in multigeometry geometry not having the bounds in self.options and crashing the GCode generation
- fixed bug that crashed whole application in case that the GCode editor is activated on a Tool gcode that is defective.
2019-02-06 00:16:14 +02:00
c14f28d35e
Merged in test_beta_8.906 (pull request #131 )
...
Test beta 8.906
2019-02-05 20:35:21 +00:00
2ea2ed0cb0
- fixed the units calculators crash FlatCAM when using comma as decimal separator
2019-02-05 22:32:48 +02:00
c6277967a6
- corrected the VIew menu with the new shortcuts for Zoom Fit, Zoom In, Zoom Out
2019-02-05 19:59:22 +02:00
3b8b7d470a
- added a new parameter to set the feedrate of the probing in case the used postprocessor does probing (has toolchange_probe in it's name)
...
- fixed bug in Marlin postprocessor for the Excellon files; the header and toolchange event always used the parenthesis witch is not compatible with GCode for Marlin
- fixed a issue with a move to Z_move before any toolchange
2019-02-05 19:40:46 +02:00
822800e7f5
- added a way to set the Probe depth if Toolchange_Probe postprocessors are selected
...
- finished the postprocessor file for MACH3 tool probing on toolchange event
2019-02-05 16:43:12 +02:00
ed6d262780
- added an initial text in the Tools tab
...
- added possibility to use the shortcut key for shortcut list in the Notebook tabs
2019-02-05 13:37:49 +02:00
Marius Stanciu