Marius Stanciu
2bd730ceeb
- some fixes in Paint Tool when done over the Gerber objects in case that the progressive plotting is selected
...
- some fixes in Gerber isolation in case that the progressive plotting is selected; added a 'Buffer solid geometry' button shown only when progressive plotting for Gerber object is selected. It will buffer the entire geometry of the object and plot it, in a threaded way.
2019-09-09 14:32:30 +03:00
Marius Stanciu
f38dab80e3
- added for NCC Tool and Paint Tool a setting in the Preferences -> Tools --> (NCC Tool/ Paint Tool) that can set a progressive plotting (plot shapes as they are processed)
2019-09-09 05:14:44 +03:00
Marius Stanciu
198e055328
- added a setting in Preferences -> Gerber -> Gerber General named Buffering. If set to 'no' the Gerber objects load a lot more faster (perhaps 10 times faster than when set to 'full') but the visual look is not so great as all the aperture polygons can be seen
2019-09-09 02:41:14 +03:00
Marius Stanciu
bdbe0f59f0
- modified the on_about() message
2019-09-07 20:10:09 +03:00
Marius Stanciu
97024ed643
- corrected some issues and made Move Tool to show correctly when it is moving and when it is offsetting the objects position
2019-09-07 18:41:48 +03:00
Marius Stanciu
f164dae7a9
- added to GUI new options for the Gerber object related to area subtraction
...
- added new feature in the Gerber object isolation allowing for the isolation to avoid an area defined by another object (Gerber or Geometry)
2019-09-07 15:13:40 +03:00
Marius Stanciu
5d854a6f1b
- added a method to gracefully exit from threaded tasks and implemented it for the NCC Tool and for the Paint Tool
...
- modified the on_about() function to reflect the reality in 2019 - FlatCAM it is an Open Source contributed software
2019-09-07 09:16:32 +03:00
Marius Stanciu
a138c539e4
- remade visibility threaded
...
- reimplemented the thread listening for new FlatCAM process starting with args so it is no longer subclassed but using the moveToThread function
2019-09-06 00:16:33 +03:00
Marius Stanciu
eb7584b649
- hidden the configuration for G91 coordinates due of deciding to leave this development for another time; it require too much refactoring
...
- added some messages for the G-code generation so the user know in which stage the process is
2019-09-05 20:36:02 +03:00
Marius Stanciu
a2a3f1c1ed
- added support for G91 coordinates
...
- working in plotting the CNCjob generated with G91 coordinates
2019-09-04 17:41:17 +03:00
Marius Stanciu
7ff8d893c0
- in NCC tool there is now a depth of cut parameter named 'Cut Z' which will dictate how deep the tool will enter into the PCB material
...
- in NCC tool added possibility to choose between the type of tools to be used and when V-shape is used then the tool diameter is calculated from the desired depth of cut and from the V-tip parameters
2019-09-03 01:13:03 +03:00
Marius Stanciu
60512f09a7
- in Properties Tool made threaded the calculation of convex_hull area and to work for multi-geo objects
...
- in NCC tool the type of tool that is used is transferred to the Geometry object
- in NCC tool the type of isolation done with the tools selected as isolation tools can now be selected and it has also an Edit -> Preferences entry
2019-09-02 21:39:46 +03:00
Marius Stanciu
b84fe4e901
- in Excellon and Gerber Seleted tab made the Plot (mark) columns not selectable
...
- some ToolTips were modified
2019-09-02 16:46:38 +03:00
Marius Stanciu
625559555c
- made changes in the Excellon Tools Table to make it more clear that the tools are selected in the # column and not in the Plot column
2019-09-02 13:52:15 +03:00
Marius Stanciu
4b7115ca59
- added formatting for some strings in the app strings, making the future translations easier
2019-09-02 13:24:04 +03:00
Marius Stanciu
1295a94af1
- fixed open handlers
...
- fixed issue in NCC Tool where the tool table context menu could be installed multiple times
- added new ability to create simple isolation's in the NCC Tool
2019-09-02 00:14:28 +03:00
Marius Stanciu
9a8fa1ac4c
- added support for file associations with FlatCAM, for Windows
2019-08-26 05:35:18 +03:00
Marius Stanciu
0e96be7d9a
- made PlotCanvas class inherit from VisPy Canvas instead of creating an instance of it (work of JP)
2019-08-24 04:45:25 +03:00
Marius Stanciu
4ca15b486b
- modified the way key modifiers are detected in Gerber Editor Selection class and in Excellon Editor Selection class
...
- updated the translations
2019-08-23 23:54:13 +03:00
Marius Stanciu
e35cf7f02c
- fixed the issue with GUI entries content being deselected on right click in the box in order to copy the value
2019-08-23 21:01:23 +03:00
Marius Stanciu
1d632c6396
- fixed the issue with GUI entries content being deselected on right click in the box in order to copy the value
2019-08-23 20:09:07 +03:00
Marius Stanciu
f087c242f3
- in Tool Cutout tool I've added the possibility to create a cutout without bridge gaps; added the 'None' option in the Gaps combobox
2019-08-23 02:38:42 +03:00
Marius Stanciu
948c495447
- in Tool Cutout for the manual gaps, now the moving geometry that cuts gaps will orient itself to fit the angle of the cutout geometry
2019-08-23 02:15:45 +03:00
Marius Stanciu
c2991b969b
- moved the canvas setup into it's own function and called it in the init() function
2019-08-22 17:23:39 +03:00
Marius Stanciu
bd8f607b32
- added possibility to turn application portable from the Edit -> Preferences -> General -> App. Preferences -> Portable checkbox
2019-08-22 02:53:18 +03:00
Marius Stanciu
a365225416
- added ability to turn ON/OFF the detachable capability of the tabs in Notebook through a context menu activated by right mouse button click on the Notebook header
2019-08-22 01:20:33 +03:00
Marius Stanciu
47cd3dd043
- in NCC Tool added area selection feature
2019-08-21 03:24:38 +03:00
Marius Stanciu
50210820e2
- added feature in Paint Tool allowing the painting to be done on Gerber objects
...
- added feature in Paint Tool to set how (and if) the tools are sorted
- added Edit -> Preferences GUI entries for the above just added features
2019-08-21 02:13:10 +03:00
Marius Stanciu
5cc16a03db
- updated the Edit -> Preferences to include also the Gerber Editor complete Preferences
...
- started to update the app strings to make it easier for future translations
2019-08-19 17:24:56 +03:00
Marius Stanciu
c2563b4857
- added ability to lock toolbars within the context menu that is popped up on any toolbars right mouse click. The value is saved in QSettings and it is persistent between application startup's.
2019-08-18 19:35:21 +03:00
Marius Stanciu
36586aecce
- finished adding in Paint Tool the usage of an external object to set the extent of th area painted. For simple shapes (single Polygon) the shape can be anything, for the rest will be a convex hull of the reference object
...
- modified NCC tool so for simple objects (single Polygon) the external object used as reference can have any shape, for the other types of objects the copper cleared area will be the convex hull of the reference object
- modified the strings of the app wherever they contained the char seq <b> </b> so it is not included in the translated string
2019-08-18 14:17:46 +03:00
Marius Stanciu
1fca6ef1bf
- added possibility to drag & drop FlatCAM config files (*.FlatConfig) into the canvas to be opened into the application
2019-08-18 03:11:19 +03:00
Marius Stanciu
531beb1d97
- in NCC Tool added a new parameter (radio button) that offer the choice on the order of the tools both in tools table and in execution of engraving; added as a parameter also in Edit -> Preferences -> Tools -> NCC Tool
2019-08-18 03:03:18 +03:00
Marius Stanciu
9205dd61f8
- fixed error when creating CNCJob due of having the annotations disabled from preferences but the plot2() function from camlib.CNCJob class still performed operations who yielded TypeError exceptions
2019-08-17 15:11:50 +03:00
Marius Stanciu
bc6b2666cd
- added estimated time of routing for the CNCJob and added travelled distance parameter for geometry, too
2019-08-17 06:02:20 +03:00
Marius Stanciu
9e7d81d61b
- added new menu category in File -> Backup with two menu entries that duplicate the functions of the export/import preferences buttons from the bottom of the Preferences window
2019-08-16 18:52:06 +03:00
Marius Stanciu
e061c4364a
- each CNCJob object has now it's own text_collection for the annotations which allow the individual enabling and disabling of the annotations
2019-08-16 17:21:31 +03:00
Marius Stanciu
c886e3300c
- added the Slot Type parameter for exporting Excellon in Edit -> Preferences -> Excellon -> Export Excellon. Now the Excellon object can be exported also with drilled slot command G85
...
- fixed bug in Excellon export when there are no zero suppression (coordinates with decimals)
2019-08-16 00:44:04 +03:00
Marius Stanciu
ca8a12610e
- fixed the GUI for Slot Arrays in Excellon Editor
...
- finished the Slot Array tool in Excellon Editor
- added the key shortcut handlers for Add Slot and Add Slot Array tools in Excellon Editor
- started to work on the Resize tool for the case of Excellon slots in Excellon Editor
2019-08-15 17:55:32 +03:00
Marius Stanciu
5c75998dbb
- stored inside FlatCAM app the VisPy data files and at the first start the application will try to copy those files to the APPDATA (roaming) folder in case of running under Windows
...
- created an app 'switch' named 'self.portable' which when set True it will 'cx-freeze' an portable application
2019-08-15 02:18:13 +03:00
Marius Stanciu
ab12853393
- added Edit -> Preferences GUI and storage for the Excellon Editor Add Slots
...
- added a confirmation message for objects delete and a setting to activate it in Edit -> Preferences -> Global
2019-08-15 00:59:15 +03:00
Marius Stanciu
f3fc175197
- changes in the way the edited Excellon with added slots is saved
...
- added more icons and cursor in Excellon Editor for Slots related functions
2019-08-14 16:05:24 +03:00
Marius Stanciu
3905e11171
- started to work in adding slots and slots array in Excellon Editor
2019-08-13 16:39:21 +03:00
Marius Stanciu
13a29a229d
- added all the tools from Gerber Editor to the the contextual menu
...
- added the menu entry "Edit" in the Project contextual menu for Gerber objects
2019-08-13 16:15:01 +03:00
Marius Stanciu
3e339630e6
- fixed bugs in Geometry Editor
...
- added protection's against the 'bowtie' geometries for Subtract Tool in Geometry Editor
- added all the tool from Geometry Editor to the the contextual menu
- fixed bug in Add Text Tool in Geometry Editor that gave error when clicking to place text without having text in the box
2019-08-13 13:59:23 +03:00
Marius Stanciu
eb4f504911
- fixed a bug in FCDoubleSpinner GUI element
...
- added a new parameter in NCC tool named offset. If the offset is used then the copper clearing will finish to a set distance of the copper features
2019-08-13 11:32:58 +03:00
Marius Stanciu
0686e77f99
- added new settings in Edit -> Preferences -> General for Notebook Font size (set font size for the items in Project Tree and for text in Selected Tab) and for canvas Axis font size. The values are stored in QSettings.
...
- updated translations
2019-08-13 04:23:32 +03:00
Marius Stanciu
ee3b38327e
- added new option in ToolSub: the ability to close (or not) the resulting paths when using tool on Geometry objects. Added also a new category in the Edit -> Preferences -> Tools, the Substractor Tool Options
2019-08-13 00:42:58 +03:00
Marius Stanciu
fd104eee55
- done regression to solve the bug with multiple passes cutting from the copper features (I should remember not to make mods here)
...
- if 'combine' is checked in Gerber isolation but there is only one pass, the resulting geometry will still be single geo
- the 'passes' entry was changed to a IntSpinner so it will allow passes to be entered only in range (1, 999) - it will not allow entry of 0 which may create some issues
2019-08-12 00:28:46 +03:00
Marius Stanciu
eea66c0311
- added new feature in NCC Tool: now another object can be used as reference for the area extent to be cleared of copper
2019-08-10 14:59:29 +03:00
Marius Stanciu
89717642ed
- fixed bug that created a choppy geometry for CNCJob when working in INCH
...
- fixed bug that did not asked the user to save the preferences after importing a new set of preferences, after the user is trying to close the Preferences tab window
2019-08-10 11:46:23 +03:00
Marius Stanciu
7a6c0541be
- started to work on Paint Area in Paint Tool
2019-08-07 17:10:48 +03:00
Marius Stanciu
258d3463e7
- replaced setFixedWidth calls with setMinimumWidth
2019-08-07 14:29:59 +03:00
Marius Stanciu
74460f9dcd
- some minor UI changes
2019-08-06 04:25:56 +03:00
Marius Stanciu
59b4defa0b
- fixed bug that crashed the app after creating a new geometry, if a new object is loaded and the new geometry is deleted and then trying to select the just loaded new object
...
- made some GUI elements in Edit -> Preferences to have a minimum width as opposed to the previous fixed one
2019-08-06 02:31:09 +03:00
Marius Stanciu
c6d917dec4
- added project name to the window title
2019-08-03 03:35:21 +03:00
Marius Stanciu
33344b6626
- added a detection if any values are changed in the Edit -> Preferences window and on close it will ask the user if he wants to save the changes or not
...
- created a new menu entry in the File menu named Recent projects that will hold the recent projects and the previous "Recent files" will hold only the previous loaded files
2019-07-31 22:45:03 +03:00
Marius Stanciu
93b2907ba7
- work on identification of changes in Preferences tab
2019-07-31 17:48:18 +03:00
Marius Stanciu
6242d1809b
- changed the order of the menu entries in the FIle -> Open ...
...
- organized the list of recent files so the Project entries are to the top and separated from the other types of file
2019-07-31 17:17:08 +03:00
Marius Stanciu
f282a761b4
- added two more strings to translation strings (due of German language)
...
- completed the Russian translation using the Google and Yandex translation engines
2019-07-30 22:33:18 +03:00
Marius Stanciu
1e7421ebe9
- changed the Disable plots menu entry in the context menu, into a Toggle Visibility menu entry
...
- Spanish Google translation 100% but two strings (big ones)
2019-07-30 20:05:16 +03:00
Marius Stanciu
7bca0678ea
- fixed bug that crashed the app when trying to add a tool without a tool diameter value
2019-07-30 13:00:17 +03:00
Marius Stanciu
c6e3176ac3
- in Basic mode, the tool type column is no longer hidden as it may create issues when using an painted geometry
...
- some PEP8 clean-up in FlatCAMGui.py
2019-07-29 00:35:59 +03:00
Marius Stanciu
dce0d971cd
- updated the CutOut tool so it will work on single PCB Gerbers or on PCB panel Gerbers
2019-07-20 19:36:37 +03:00
Marius Stanciu
e691c26b01
- fixed bug in FlatCAMObj.FlatCAMGeometry.ui_disconnect(); the widgets signals were not disconnected from handlers when required therefore the signals were connected in an exponential way
...
- some changes in the widgets used in the Selected tab for Geometry object
- some PEP8 cleanup in FlatCAMObj.py
- updated languages
- 60% progress in Spanish Google translation
2019-07-20 01:17:33 +03:00
Marius Stanciu
2797a58165
- fixed bug in FlatCAMObj.FlatCAMGeometry.ui_disconnect(); the widgets signals were not disconnected from handlers when required therefore the signals were connected in an exponential way
...
- some changes in the widgets used in the Selected tab for Geometry object
- some PEP8 cleanup in FlatCAMObj.py
2019-07-19 21:46:11 +03:00
Marius Stanciu
ac2bf56e14
- added some more strings to the translateable ones, especially the radio button labels
...
- updated the .POT file and the available translations
- 51% progress in Spanish Google translation
2019-07-17 14:11:10 +03:00
Marius Stanciu
43cb92e1d8
- fixed a possible issue in Gerber Object class
...
- added a new tool in Gerber Editor: Mark Area Tool. It will mark the polygons in a edited Gerber object with areas within a defined range, allowing to delete some of the not necessary copper features
- added new menu links in the Gerber Editor menu for Eraser Tool and Mark Area Tool
- added key shortcuts for Eraser Tool (CTRL+E) and Mark Area Tool (ALT+A) and updated the shortcuts list
2019-07-13 21:40:33 +03:00
Marius Stanciu
16525a606c
- fixed some log errors
2019-07-08 22:42:58 +03:00
Marius Stanciu
76ce5843e3
- some minor log messages modified to show the exceptions
2019-07-04 23:43:28 +03:00
Marius Stanciu
429753d211
- fixes issues with units conversion when the tool diameters are a list of comma separated values (NCC Tool, SolderPaste Tool and Geometry Object)
...
- fixed a "typo" kind of bug in SolderPaste Tool
- RELEASE 8.919
2019-06-23 00:04:49 +03:00
Marius Stanciu
68bdfaf062
- some GUI layout optimizations in Edit -> Preferences
...
- added the possibility for multiple tool diameters in the Edit -> Preferences -> Geometry -> Geometry General -> Tool dia separated by comma
- fixed scaling for the multiple tool diameters in Edit -> Preferences -> Geometry -> Geometry General -> Tool dia, for NCC tools more than 2 and for Solderpaste nozzles more than 2
- fixed bug in CNCJob where the CNC Tools table will show always only 2 decimals for Tool diameters regardless of the current measuring units
- made the tools diameters decimals in case of INCH FlatCAM units to be 4 instead of 3
- fixed bug in updating Grid values whenever toggling the FlatCAM units and the X, Y Grid values are linked, bugs which caused the Y value to be scaled incorrectly
- set the decimals for Grid values to be set to 6 if the units of FlatCAM is INCH and to set to 4 if FlatCAM units are METRIC
- updated translations
- updated the Russian translate from 51% complete to 69% complete using the Yandex translation engine
2019-06-22 17:58:31 +03:00
Marius Stanciu
1b0cf14ef7
- fixed bug in Gerber parser that made the Gerber files generated by Altium Designer 18 not to be loaded
2019-06-15 17:20:38 +03:00
camellan
8e71c93a62
Update Russian translate. Add translation strings. Update pot.
2019-06-09 22:09:15 +04:00
camellan
bfab836a1b
Update zoom in and zoom out function.
2019-06-09 19:24:01 +04:00
camellan
4587946b48
Merge remote-tracking branch 'remotes/jpcgt/flatcam/Beta' into Beta
2019-06-09 19:10:56 +04:00
Marius Stanciu
3bd2957739
- updated translations
...
- fixed the the labels for shortcut keys for zoom in and zoom out both in the Menu links and in the Shortcut list
- made sure the zoom functions use the global_zoom_ratio parameter from App.self.defaults dictionary.
2019-06-09 17:27:11 +03:00
camellan
f5ca2fc62a
Update translation
2019-06-09 03:34:09 +04:00
camellan
c8ba7bd150
Fix Zoom function. Update translate.
2019-06-09 02:33:12 +04:00
Marius Stanciu
5c5f2c1606
Merged in marius_stanciu/flatcam_beta/Beta_8.918 (pull request #150 )
...
Beta 8.918
2019-06-08 21:30:13 +00:00
camellan
facd8301ed
solve the conflicts
2019-06-08 23:30:57 +04:00
camellan
70e939ca36
Merge remote-tracking branch 'remotes/jpcgt/flatcam/Beta' into Beta
2019-06-08 23:16:41 +04:00
Marius Stanciu
5f972ab85e
- make sure that the annotation shapes are deleted on creation of a new project
...
- added folder for the Russian translation
- made sure that visibility for TextGroup is set only if index is not None in VisPyVisuals.TextGroup.visible() setter
- RELEASE 8.918
2019-06-08 21:36:34 +03:00
Marius Stanciu
2974389404
- after editing an parameter the focus is lost so the user knows that something happened
2019-06-05 15:07:45 +03:00
Marius Stanciu
0ee5114012
- some layout changes in Edit -> Preferences such that the German translation (longer words than English) to fit correctly
2019-06-05 13:22:12 +03:00
Marius Stanciu
9f17cc9747
- small changes
2019-06-05 00:25:45 +03:00
camellan
9e88950e65
Add translation strings. Update Russian translation.
2019-06-04 23:39:36 +04:00
Marius Stanciu
150bb9e999
- PEP8 cleanup in FlatCAMGui
...
- finished adding the Excellon Editor parameters into the app logic and added a selection limit within Excellon Editor just like in the other editors
2019-06-04 22:19:45 +03:00
Marius Stanciu
dc51f6d833
- PEP8 updates in FlatCAMExcEditor.py
...
- added the Excellon Editor parameters to the Edit -> Preferences -> Excellon
- fixed a small bug in Excellon Editor
2019-06-04 14:58:33 +03:00
Marius Stanciu
f06fec12ea
- added a new parameter in Edit -> Preferences -> CNCJob named Annotation Color; it controls the color of the font used for annotations
...
- added a new parameter in Edit -> Preferences -> CNCJob named Annotation Size; it controls the size of the font used for annotations
- made visibility change threaded in FlatCAMObj()
2019-06-03 22:59:45 +03:00
Marius Stanciu
9abb9c5df2
- added the possibility to display text annotation for the CNC travel lines. The setting is both in Preferences and in the CNC object properties
2019-05-31 12:43:30 +03:00
Marius Stanciu
8ee516ec14
- editing a multi geometry will no longer pop-up a Tcl window
...
- solved issue #292 where a new geometry renamed with many underscores failed to store the name in a saved project
- the name for the saved projects are updated to the current time and not to the time of the app startup
- some PEP8 changes related to comments starting with only one '#' symbol
2019-05-30 21:05:12 +03:00
Marius Stanciu
ad7222a768
- added a toggle left panel button to the canvas context menu
2019-05-24 19:50:59 +03:00
Marius Stanciu
bc3da37e81
- added a toggle Grid button to the canvas context menu in the Grids submenu
2019-05-24 18:53:33 +03:00
Marius Stanciu
cffcbb2410
- Geo Editor - added a new editor tool, Eraser
2019-05-22 15:03:45 +03:00
Marius Stanciu
511df19793
- Gerber Editor - started to work on a new editor tool: Eraser
2019-05-20 17:15:33 +03:00
Marius Stanciu
e04db8ca12
- set the buttons in the lower part of the Preferences Window to have a preferred minimum width instead of fixed width
...
- updated the translation files
2019-05-20 02:29:08 +03:00
Marius Stanciu
94e7820dde
- PEP8 corrections in FlatCAMGrbEditor.py
...
- added a selection limit parameter for Geometry Editor
- added entries in Edit -> Preferences for the new parameter Selection limit for both the Gerber and Geometry Editors.
2019-05-20 01:18:08 +03:00
Marius Stanciu
8ccd73b919
- added a new toggle option in Edit -> Preferences -> General Tab -> App Preferences -> "Open" Behavior. It controls which path is used when opening a new file. If checked the last saved path is used when saving files and the last opened path is used when opening files. If unchecked then the path for the last action (either open or save) is used.
2019-05-18 17:17:37 +03:00
Marius Stanciu
d172a3ca49
- Gerber Export: made sure that if some of the coordinates in a Gerber object geometry are repeating then the resulting Gerber code include only one copy
...
- added a new parameter/feature: now the spindle can work in clockwise mode (CW) or counter clockwise mode (CCW)
2019-05-16 03:13:22 +03:00