e091fd232d
- added (and commented) an experimental FlatCAMObj.FlatCAMGerber.plot_apertures()
2019-02-14 00:09:48 +02:00
15b533f25e
- made the Gerber aperture table not visibile as default and added a checkbox that can toggle the visibility
...
- fixed issue with plotting in CNCJob; with Plot kind set to something else than 'all' when toggling Plot, it was defaulting to kind = 'all'
2019-02-13 23:48:43 +02:00
f3b1b45968
- changed the layout in the Selected Tab UI
...
- started to add apertures table support
- finished Gerber aperture table display
2019-02-13 17:26:21 +02:00
899e8b433d
- added new parameter for Excellon Object in Preferences: Fast Retract. If the checkbox is checked then after reaching the drill depth, the drill bit will be raised out of the hole asap.
...
- started to work on GUI forms simplification
- changed the Preferences GUI for Geometry and Excellon Objects to make a difference between parameters that are changed often and those that are not.
2019-02-13 14:30:29 +02:00
c94679919d
- stored solid_geometry of Excellon object in the self.tools dictionary
...
- finished the solid_geometry restore after edit in Excellon Editor
- finished plotting selection for each tool in the Excellon Tool Table
- fixed the camlib.Excellon.bounds() function for the new type of Excellon geometry therefore fixed the canvas selection, too
2019-02-13 01:22:09 +02:00
02793f7ae2
- starting to work on storing the solid_geometry for each tool in part in Excellon Object
2019-02-12 16:55:43 +02:00
9b61e4cc37
- finished work on Offset parameter in Excellon Object (Excellon Editor, camlib, FlatCAMObj updated to take this param in consideration)
...
- fixed a bug where in Excellon editor when editing a file, a tool was automatically added. That is supposed to happen only for empty newly created Excellon Objects.
2019-02-12 15:12:12 +02:00
d0641458e4
- whenever a FlatCAM tool is activated, if the notebook side is hidden it will be unhidden
...
- reactivated the Voronoi classed
- added a new parameter named Offset in the Excellon tool table - work in progress
2019-02-12 04:00:11 +02:00
4609f61546
- changes in Toolchange_Probe_MACH3 postprocessor file
2019-02-10 23:36:59 +02:00
8cedc0cad9
- added a pause and message/warning to do a rough zero for the Z axis, in case of Toolchange_Probe_MACH3 postprocessor file
2019-02-10 23:04:37 +02:00
e8b9555a94
- added a strong focus to the object_name entry in the Selected tab
...
- the keypad keyPressed are now detected correctly
2019-02-10 22:55:51 +02:00
f01ac4483a
- adjusted the postprocessor files so the Spindle Off command (M5) is done before the move to Toolchange Z
...
- adjusted the Toolchange Manual postprocessor file to have more descriptive messages on the toolchange event
2019-02-10 13:42:22 +02:00
f35994a712
- repurposed shortcut key 'Delete' to delete tools in tooltable when the mouse is over the Seleted tab (with Geometry inside) or in Tools tab (when NCC Tool or Paint Tool is inside). Or in Excellon Editor when mouse is hovering the Selected tab selecting a tool, 'Delete' key will delete that tool, if on canvas 'Delete' key will delete a selected shape (drill). In rest, will delete selected objects.
2019-02-10 02:09:05 +02:00
b68a010bde
- the SELECTED type of messages are no longer printed to shell from 2 reasons: first, too much spam and second, issue with displaying html
...
- on set_zero function and creation of new geometry or new excellon there is no longer a zoom fit
2019-02-09 19:44:01 +02:00
59e12cf295
- fixed an error in Excellon Editor -> add drill array that could appear by starting the function to add a drill array by shortcut before any mouse move is registered while in Editor
...
- changed the messages from status bar on new object creation/selection
- in Geometry Editor fixed the handler for the Rotate shortcut key ('R')
2019-02-09 16:00:47 +02:00
8665b1d8c3
- added into Preferences the Calculator Tools
...
- made the Preferences window scrollable on the horizontal side (it was only vertically scrollable before)
- made invisible some buttons that could mislead (the ones for slots converted to drills which I deem unsafe)
2019-02-09 11:52:08 +02:00
d17fc12196
- added a protection for when saving a file first time, it require a saved path and if none then it use the current working directory
2019-02-09 01:58:08 +02:00
8b0a9a429a
- fixed some errors
2019-02-09 01:47:59 +02:00
da7029dc0b
- if trying to add a tool using shortcut key 'T' with value zero the app will react with a message telling to use a non-zero value.
2019-02-09 01:18:03 +02:00
8f000c0a18
- in Excellon Editor added a protection for Tool_dia field in case numbers using comma as decimal separator are used. Also added a QDoubleValidator forcing a number with max 4 decimals and from 0.0000 to 9.9999
...
- in Excellon Editor added a shortcut key 'T' that popup a window allowing to enter a new Tool with the set diameter
- in App added a shortcut key 'T' that popup a windows allowing to enter a new Tool with set diameter only when the Selected tab is on focus and only if a Geometry object is selected
- changed the shortcut key for Transform Tool from 'T' to 'ALT+T'
- fixed bug in Geometry Selected tab that generated error when used tool offset was less than half of either total length or half of total width. Now the app signal the issue with a status bar message
- added Double Validator for the Offset value so only float numbers can be entered.
- in App added a shortcut key 'T' that popup a windows allowing to enter a new Tool with set diameter only when the Tool tab is on focus and only if a NCC Tool or Paint Area Tool object is installed in the Tool Tab
2019-02-09 00:08:54 +02:00
824b1a95ab
- moved all shortcut keys handlers from Editors to the keyPressEvent() handler from FLatCAMGUI
2019-02-08 16:57:51 +02:00
2be35e4248
- fixed errors in Toggle Axis
...
- fixed error with shortcut key triggering twice the keyPressEvent when in the Project List View
2019-02-08 15:55:32 +02:00
f39fea072c
- when shortcut keys 1, 2, 3 (tab selection) are activated, if the splitter left side (the notebook) is hidden it will be mae visible
...
- changed the menu entry Toggle Grid name to Toggle Grid Snap
2019-02-08 14:55:50 +02:00
5b75d416ec
- moved some graphical classes out of Tool Shell to GUIElements.py where they belong
...
- when selecting an object on canvas by single click, it's name is displayed in status bar. When nothing is selected a blank message (nothing) it's displayed
- in Move Tool I've added the type of object that was moved in the status bar message
- color coded the status bar bullet to blue for selection
- the name of the selected objects are displayed in the status bar color coded: green for Gerber objects, Brown for Excellon, Red for Geometry and Blue for CNCJobs.
2019-02-07 22:37:51 +02:00
c888303146
- added a new function and the shortcut 'leftquote' (left of Key 1) for toggle of the notebook section
...
- changed the Shortcut list shortcut key to F3
2019-02-07 20:39:37 +02:00
07ae0c9c8b
- small changes in Tools layout
2019-02-07 17:03:06 +02:00
ab026a1a9d
- added a disable menu entry in the canvas contextual menu
2019-02-07 03:16:29 +02:00
6c6a802afb
- commented some debug messages
...
- imported speedups for shapely
2019-02-07 01:36:37 +02:00
700222d5dc
- in Paint Tool, when painting single polygon, when clicking on canvas for the polygon there is no longer a selection of the entire object
2019-02-07 00:53:51 +02:00
1a8db0b5d9
- fixed the Tcl Command Geocutout to work with Gerber objects too (besides Geometry objects)
2019-02-06 22:32:32 +02:00
2ee80990e5
- added a new function (and shortcut key Escape) that when triggered it deselects all selected objects and delete the selection box(es)
...
- fixed bug in Excellon Gcode generation that made the toolchange X,Y always none regardless of the value in Preferences
2019-02-06 21:37:50 +02:00
9dfbae7515
- added plot kind for CNC Job in the App Preferences
2019-02-06 20:29:53 +02:00
05ae92726c
- renamed the theme to layout because it is really a layout change
...
- combined the geocutout and cutout_any TCL commands - work in progress
2019-02-06 16:59:17 +02:00
8bbb9ba534
- all kwy shortcuts work across the entire application; started to move all the shortcuts definitions in FlatCAMGUI.keyPressEvent()
2019-02-06 16:23:09 +02:00
67d089832e
- all kwy shortcuts work across the entire application; started to move all the shortcuts definitions in FlatCAMGUI.keyPressEvent()
2019-02-06 14:44:16 +02:00
28f11ef55f
- small bugs related to shortcut keys solved
2019-02-06 14:27:11 +02:00
dedf8c09de
- fixed the name self-insert in save dialog file for GCode; added protection in case the save path is None
...
- fixed FlatCAM crash when trying to make drills GCode out of a file that have only slots.
- made the shell toggle shortcut key work when focused on Selected Tab; toggle units shortcut also
- changed the messages for Units COnversion
2019-02-06 14:03:59 +02:00
b589292c0f
- fixed bug in Excellon Slots milling: a value of a dict key was a string instead to be an int. A cast to integer solved it.
2019-02-06 02:17:29 +02:00
299a6585a7
- done a regression on Tool Tab default text. It somehow delete Tools in certain scenarios so I got rid of it
...
- fixed bug in multigeometry geometry not having the bounds in self.options and crashing the GCode generation
- fixed bug that crashed whole application in case that the GCode editor is activated on a Tool gcode that is defective.
2019-02-06 00:16:14 +02:00
2ea2ed0cb0
- fixed the units calculators crash FlatCAM when using comma as decimal separator
2019-02-05 22:32:48 +02:00
3b8b7d470a
- added a new parameter to set the feedrate of the probing in case the used postprocessor does probing (has toolchange_probe in it's name)
...
- fixed bug in Marlin postprocessor for the Excellon files; the header and toolchange event always used the parenthesis witch is not compatible with GCode for Marlin
- fixed a issue with a move to Z_move before any toolchange
2019-02-05 19:40:46 +02:00
822800e7f5
- added a way to set the Probe depth if Toolchange_Probe postprocessors are selected
...
- finished the postprocessor file for MACH3 tool probing on toolchange event
2019-02-05 16:43:12 +02:00
ed6d262780
- added an initial text in the Tools tab
...
- added possibility to use the shortcut key for shortcut list in the Notebook tabs
2019-02-05 13:37:49 +02:00
bd3cb3aba3
- added a text in the Selected Tab which is showed whenever the Selected Tab is selected but without having an object selected to display it's properties
2019-02-05 13:04:37 +02:00
3714203c95
- formatted the Shortcut List Tab into a HTML table
2019-02-04 23:41:17 +02:00
8a6c48c7a9
- changed the shortcut keys for Zoom In, Zoom Out and Zoom Fit from 1, 2, 3 to '-', '=' respectively 'V'. Added new shortcut keys '1', '2', '3' for Select Project Tab, Select Selected Tab and Select Tool Tab.
2019-02-04 22:35:01 +02:00
713b584841
- added a new parameter in the Tool Film which control the thickness of the stroke width in the resulting SVG. It's a scale parameter.
...
- whatever was the visibility of the corresponding toolbar when we enter in the Editor, it will be set after exit from the Editor (either Geometry Editor or Excellon Editor).
- added ability to be detached for the tabs in the Notebook section (Project, Selected and Tool)
- added ability for all detachable tabs to be restored to the same position from where they were detached.
- restored the way the tools autoloaded the objects in the comboboxes
2019-02-04 20:49:37 +02:00
166fa0470b
- modified ReadMe to correct a mistake
2019-02-04 16:30:48 +02:00
4e8f8905c8
- modified the Toolchange_Probe_general postprocessor file to include now Z moves before the actual toolchange event
...
- created a prototype postprocessor file for usage with tool probing in MACH3
- added the default values for Tool Film and Tool Panelize to the Edit -> Preferences
2019-02-04 16:29:12 +02:00
e1888b1647
- added an automatic name on each save operation based on the object name and/or the current date
...
- added more information's for the statistics
2019-02-03 23:08:09 +02:00
5e55f0d499
- fixed remove_tools() so the Tcl Shell action is readded to the Tools menu and reconnected to it's slot function
2019-02-03 16:49:33 +02:00
7da1d23098
- added a remove_tools() function before install_tools() in the init_tools() that is called when creating a new project. Should solve the issue with having double menu entry's in the TOOLS menu
2019-02-03 16:29:56 +02:00
6ea3499d39
- updated the new shortcut list with the shortcuts added lately
...
- now the special messages in the Shell are color coded according to the level. Before they all were RED. Now the WARNINGS are yellow, ERRORS are red and SUCCESS is a dark green. Also the level is in CAPS LOCK to make them more obvious
- some more changes to GUI interface (solved issues)
- added some status bar messages in the Geometry Editor to guide the user when using the Geometry Tools
- now the '`' shortcut key that shows the 'shortcut key list' in Editors points to the same window which is created in a tab no longer as a pop-up window. This tab can be detached if needed.
2019-02-03 15:13:09 +02:00
12b78cf2f3
- fixed the snap magnet button in Geometry Editor, restored the checkable property to True
...
- some more changes in the Editors GUI in deactivate() function
- a fix for saving again empt an edited new and empty Excellon Object
2019-02-03 00:52:57 +02:00
ee2c684a9c
- added a new postprocessor file named: 'probe_from_zmove' which allow probing to be done from z_move position on toolchange event
2019-02-03 00:11:17 +02:00
7607aad8d8
- added protection against entering float numbers with comma separator instead of decimal dot separator in key points of FlatCAM (not everywhere)
...
- added a choice of plotting the kind of geometry for the CNC plot (all, travel and cut kind of geometries) in CNCJob Selected Tab
2019-02-02 23:56:08 +02:00
0b96cbbac1
- code cleanup in Tools
...
- some GUI structure optimization's
2019-02-02 18:26:01 +02:00
4f97e8ae45
- fixed the date in the ReadMe
2019-02-02 03:29:17 +02:00
de7e41991d
- fixed a source of possible errors in DetachableTab Widget.
...
- fixed gcode conversion/scale (on units change) when multiple values are found on each line
- replaced the pop-up window for the shortcut list with a new detachable tab
- removed the pop-up messages from the rotate, skew, flip commands
2019-02-02 03:27:34 +02:00
365c1f4c71
- remade the way FlatCAM saves the GUI position data from a file (previously) to use PyQt QSettings
...
- added a 'theme' combo selection in Edit -> Preferences. Two themes are available: standard and compact.
- some code cleanup
2019-02-02 01:25:35 +02:00
e0adb9b43b
- corrected small type in list_sys Tcl command; added a protection of the Plot Area Tab after a successful edit.
2019-02-01 17:44:28 +02:00
5dfd1bf0ab
- fixed postprocessor files so now the bounds values are right aligned (assuming max string length of 9 chars which means 4 digits and 4 decimals)
2019-02-01 16:19:16 +02:00
f4da8c8c68
- Plot Area Tab view can now be toggled, added entry in View Menu and shortcut key CTRL+F10
...
- All the tabs in the GUI right side are (Plot Are, Preferences etc) are now detachable to a separate windows which when closed it returns in the previous location in the toolbar. Those detached tabs can be also reattached by drag and drop.
2019-02-01 14:51:49 +02:00
5ab89791c7
- FlatCAM saves now to a file in self.data_path the toolbar positions and the position of TCL Shell
2019-02-01 02:05:39 +02:00
d45d2c05ec
- added the bounds coordinates to the GCODE header; modified the postprocessor files to show them.
2019-02-01 00:23:20 +02:00
d5853722c3
- updated the camlib.CNCJob.scale() function so now the GCode is scaled also (quite a HACK :( it will need to be replaced at some point)). Units change work now on the GCODE also.
2019-01-31 23:07:53 +02:00
093f210c25
- hidden the snap magnet entry and snap magnet toggle from the main view; they are now active only in Editor Mode
2019-01-31 16:10:13 +02:00
d1780acad9
- added new function to toggle fullscreen status in Menu -> View -> Toggle Full Screen. Shortcut key: Alt+F10
...
- added key shortcuts for Enable Plots, Disable Plots and Disable other plots functions (Alt+1, Alt+2, Alt+3)
2019-01-31 15:29:05 +02:00
3c355f72be
- added a parameter ('Fast plunge' in Edit -> Preferences -> Geometry Options and Excellon Options) to control if the fast move to Z_move is done or not
2019-01-31 13:58:49 +02:00
53d50c799f
- added to the postprocessor files the command after toolchange to go with G00 (fastest) to "Z Move" value of Z pozition.
2019-01-31 03:45:21 +02:00
4441e40042
- fixed postprocessor files to work with toolchange_xy parameter value = None (no values in Edit - Preferences fields) - actual fix
...
- fixed Tcl commands CncJob and DrillCncJob to work with toolchange
2019-01-31 01:45:14 +02:00
7bc806f1dc
- fixed unit conversion functions in case the toolchange_xy parameter is None
...
- more fixes in camlib.CNCJob regarding usage of toolchange (in case it is None)
- fixed postprocessor files to work with toolchange_xy parameter value = None (no values in Edit - Preferences fields)
2019-01-31 00:36:32 +02:00
7e5ce009d8
- added a traceback report in the TCL Shell for the errors that don't allow creation of an object; useful to trace exceptions/errors
...
- in case that the Toolchange X,Y parameter in Selected (or in Preferences) are deleted then the app will still do the job using the current coordinates for toolchange
- fixed an issue in camlib.CNCJob where tha variable self.toolchange_xy was used for 2 different purposes which created loss of information.
2019-01-30 23:17:27 +02:00
dbee97ccb9
- remade the App Menu for Editors: now they will be showed only when the respective Editor is active and hidden when the Editor is closed.
2019-01-30 17:27:11 +02:00
366bfbd0f5
- added in Calculators Tool an Electroplating Calculator.
2019-01-30 16:12:02 +02:00
5a0488c19f
- added a space before Y coordinate in end_code() function in some of the postprocessor files
2019-01-29 23:27:42 +02:00
97c5c3fe1c
- optimized the FlatCAMCNCJob.on_plot_cb_click_table() plot function and solved a bug regarding having tools numbers not in sync with the cnc tool table
2019-01-29 23:01:41 +02:00
369d9256da
- added 2Sided Tool default values in Edit -> Preferences -> Tools
2019-01-29 22:33:04 +02:00
e3d51c9da5
- added protection so the Cutout (either Freeform or Rectangular) cannot be done on a multigeo Geometry
2019-01-29 22:03:24 +02:00
be2ecaa152
- added a GUI for Excellon Search time for OR-TOOLS path optimization in Edit -> Preferences -> Excellon General -> Optimization Time
...
- more changes in Edit -> Preferences -> Geometry, Gerber and in CNCJob
- added new option for Cutout Tool Freeform Gaps in Edit -> Preferences -> Tools
- fixed Freeform Cutout gaps issue (it was double than the value set)
2019-01-29 21:47:27 +02:00
5a0390f2a4
- fixed the scale, mirror, rotate, skew functions to work with Geometry Objects of multi-geometry type.
2019-01-29 15:56:49 +02:00
32aa37d793
- disabled the context menu in tools table on Paint Tool in case that the painting method is single.
...
- added protection when trying to do Intersection in Geometry Editor without having selected Geometry items.
2019-01-29 15:18:41 +02:00
970b260333
- added more shortcut keys in the Geometry Editor and in Excellon Editor; activated also the zoom (fit, in, out) shortcut keys ('1' , '2', '3') for the editors
2019-01-29 11:59:03 +02:00
f6271033b3
- fixed issue in Tool Calculators when a float value was entered starting only with the dot.
...
- added protection for entering incorrect values in Offset and Scale fields for Gerber and Geometry objects (in Selected Tab)
2019-01-29 01:03:21 +02:00
e19af486b3
- added key shortcuts for Open Manual = F1 and for Open Online VideoHelp = F2
2019-01-28 03:24:06 +02:00
c7a22e7ce5
- wip
2019-01-28 02:53:33 +02:00
37e7c8167d
- fixed the FlatCAMGerber.merge() function
...
- added a new menu entry for the Gerber Join function: Edit -> Conversions -> "Join Gerber(s) to Gerber" allowing joining Gerber objects into a final Gerber object
2019-01-28 02:47:53 +02:00
8145ff9aac
- fixed the FlatCAMGerber.merge() function
...
- added a new menu entry for the Gerber Join function: Edit -> Conversions -> "Join Gerber(s) to Gerber" allowing joining Gerber objects into a final Gerber object
2019-01-28 02:01:53 +02:00
ad69be0456
- remade the EDIT -> PREFERENCES window, the Excellon and Gerber sections. Created a new section named TOOLS
2019-01-27 15:46:54 +02:00
90ec8b3899
- modified grbl_laser postprocessor file so it includes a Sxxxx command on the line with M02 (laser active) whenever a value is enter in the Spindlespeed entry field
2019-01-27 14:01:59 +02:00
a9bc0dea56
- added shortcut key combo 'SHIFT+S' for Running a Script.
2019-01-27 06:04:50 +02:00
18fb7c2c1f
- added shortcut key 'L' for creating 'New Excellon'
2019-01-27 05:50:41 +02:00
4f7b2bbb34
- added options for trace segmentation that can be useful for auto-levelling (code snippet from Lei Zheng from a rejected pull request on FlatCAM https://bitbucket.org/realthunder/ )
2019-01-27 05:03:23 +02:00
c4a9c8bd77
- added more key shortcuts into the application; they are now displayed in the GUI menu's
...
- reorganized the Edit -> Preferences -> Global
- redesigned the messagebox that is showed when quiting ot creating a New Project: now it has an option ('Cancel') to abort the process returning to the app
2019-01-27 03:32:09 +02:00
c0031235cd
- fixed grbl_laser postprocessor file
...
- updated function for copy of an Excellon object for the case when the object has slots
- updated FlatCAMExcellon.merge() function to work in case some (or all) of the merged objects have slots
2019-01-26 09:08:41 +02:00
34749cae66
- added icons to the Project Tab context menu
...
- added new entries to the Canvas context menu (Copy, Delete, Edit/Save, Move, New Excellon, New Geometry, New Project)
2019-01-26 00:26:58 +02:00
41d7ef9e2c
- added icons to the Project Tab context menu
...
- added new entries to the Canvas context menu (Copy, Delete, Edit/Save, Move, New Excellon, New Geometry, New Project)
2019-01-26 00:12:40 +02:00
d1b1a097c1
- fixed TclCommand Cutout
...
- added a new TclCommand named CutoutAny. Keyword: cutout_any
2019-01-25 20:46:30 +02:00
3941d03702
- fixed TclCommand Cutout
...
- added a new TclCommand named CutoutAny. Keyword: cutout_any
2019-01-25 20:05:27 +02:00
006b0c8ecb
- modified the panelize TclCommand to take advantage of the new panelize() function; added a 'threaded' parameter (default value is 1) which controls the execution of the panelize TclCommand: threaded or non-threaded
2019-01-25 18:57:44 +02:00
d88d334867
- make sure to copy the options attribute to the final object in the case of: FlatCAMGeometry.merge(), FlatCAMGerber.merge() and for the Panelize Tool
2019-01-25 15:27:46 +02:00
f553f2b35a
- deleted junk folders
...
- remade the Panelize Tool: now it is much faster, it is multi-threaded, it works with multitool geometries and it works with multigeo geometries too.
2019-01-25 15:16:36 +02:00
4af4938f85
- added the Edit and Properties entries to the Project context menu
2019-01-24 20:58:36 +02:00
2c49d41500
- Excellon Editor - added possibility to create an linear drill array rotated at an custom angle
2019-01-24 20:38:53 +02:00
6673c4f608
- fixed 'grbl_laser' postprocessor bugs (missing functions)
...
- fixed display geometry for 'grbl_laser' postprocessor
2019-01-24 19:22:02 +02:00
e8acee5850
- added multiple object selection on Open ... and Import ... (idea and code snippet came from Travers Carter, BitBucket user https://bitbucket.org/travc/
2019-01-24 15:48:34 +02:00
8f787fc61a
- fixed the Copy Object function when the object is Gerber
...
- added the Copy entry to the Project context menu
- made the functions behind Disable and Enable project context menu entries, non-threaded to fix a possible issue
2019-01-24 12:31:42 +02:00
037b9657ff
- trying to fix painting single when the actual painted object it's a MultiPolygon
2019-01-24 01:34:12 +02:00
d71958262a
- changed date
2019-01-23 19:01:20 +02:00
e945ced44b
- modified the way FlatCAM preferences are saved. Now they can be saved as new files with .FlatConfig extension by the user and shared.
2019-01-23 17:06:14 +02:00
7c301922db
- added a new postprocessor file named 'line_xyz' which have x, y, z values on the same GCode line
...
- fixed calculation of total path for Excellon Gcode file
2019-01-23 00:31:48 +02:00
766e15ae38
- changed some tooltips
...
- added tooltips in Excellon tool table headers
- in Excellon Tool Table the columns are now only selectable by clicking on the header (sorting is done automatically)
- if CNCJob from Excellon then hide the CNC tools table in CNCJob Object
2019-01-21 23:44:22 +02:00
e6d431c9e3
- removed the raise statement in do_worker_task() function as this is fatal in conjunction with PyQt5
...
- added a try - except clause for the situations when for a font can't be determined the family and name
- moved font parsing to the Geometry Editor: it is done everytime the Text tool is invoked
- made sure that the HPGL postprocessor is not populated in the Excellon postprocessors in Preferences as it make no sense (HPGL is useful only for Geometries)
2019-01-21 01:17:04 +02:00
f242e3163e
- small changes (dates, version)
2019-01-20 05:37:04 +02:00
b9a062a84e
- when saving HPGL code it will be saved as a file with extension .plt
...
- the units mentioned in HPGL format are only METRIC therefore if FlatCAM units are in INCH they will be transform to METRIC
- the minimum unit in HPGL is 0.025mm therefore the coordinates are rounded to a multiple of 0.025mm
2019-01-20 04:11:34 +02:00
7ea6ee4a85
- fixed the HPGL code geometry rendering when travel
...
- fixed the message box layout when asking to save the current work
- made sure that whenever the HPGL postprocessor is selected the Toolchange is always ON and the MultiDepth is OFF
- the HPGL postprocessor entry is not allowed in Excellon Object postprocessor selection combobox as it is only applicable for Geometry
2019-01-20 02:46:42 +02:00
b9cbe97f4d
- fixed display HPGL code geometry on canvas
...
- added build folder to gitignore list
2019-01-19 03:02:47 +02:00
4b6df74c2e
- added initial implementation of HPGL postprocessor
2019-01-19 02:31:47 +02:00
18de843fc1
- added a status message for font parsing
2019-01-11 04:02:02 +02:00
5b7fe5ef11
- modified the first line in the Gcode header to show the FlatCAM version and version_date
2019-01-09 21:55:09 +02:00
e6b0eb209c
- added a message box asking users if they want to save the project in case that either New Project menu entry is clicked or if Exit menu entry is clicked or if the app is closed from the close button. The message box will be showed only if there are objects in the collection.
2019-01-09 20:55:54 +02:00
37067b5bff
- added a fix to allow creating of Excellon geometry even when there are points with no tools by skipping those points and warning the user about this in a Tcl message
2019-01-09 15:47:29 +02:00
dd49aaa68d
- added checkboxes in Preferences -> General -> Global Preferences to switch on/off version check at application startup and also to control if the app will send anonymous statistics about FlatCAM usage to help improve FlatCAM
2019-01-08 21:13:20 +02:00
ddf4884051
- fixed cutting from copper features when doing Gerber isolation with multiple passes
2019-01-07 21:38:34 +02:00
7e002dfc9f
- added tooltips in Edit->Convert menu
2019-01-07 15:44:47 +02:00
c7db9aa566
- fixed the Marlin postprocessor detection in GCode header
...
- the version date in GCode header is now the one set in FlatCAMApp.App.version_date
- fixed bug in postprocessor files: number of drills is now calculated only for the Excellon objects in toolchange function (only Excellon objects have drills)
2019-01-07 02:56:55 +02:00
954bd9097a
- fixed the Join function to work on Gerber and Excellon, Gerber and Gerber, Excellon and Excelon combination of objects. The merged property is the solid_geometry and the result is a FlatCAMGeometry object.
2019-01-07 01:23:04 +02:00
b418d15daf
- reactivated the version check in case the release is not BETA; FlatCAMApp.App has now a beta object that when set True the application will show in the Title and help-> About that is Beta (and it disable version checking)
2019-01-06 22:04:01 +02:00
3ea1f4e62c
- fixed cncjob TclCommand - it used the default values for parameters
...
- fixed the layout in ToolTransform
- fixed the initial text in the ToolShell
2019-01-06 20:40:05 +02:00
e48d2d2f49
-clean-up before merge
2019-01-03 21:25:08 +02:00
421e9766ea
-clean-up before merge
2019-01-03 21:20:54 +02:00
468e50194c
Updated dates on license and readme.
2016-07-15 23:11:50 -04:00
559aeb78cc
Licence and readme.
2015-01-03 11:36:15 -05:00
09ed43319a
Added manual.
2015-01-03 11:30:47 -05:00
709cb4bff1
README.md edited online with Bitbucket
2015-01-01 17:19:01 +00:00
dd7a98fe16
README.md edited online with Bitbucket
2014-12-28 21:53:56 +00:00
9cc4ca866b
README.md edited online with Bitbucket
2014-12-28 21:53:20 +00:00
93e39a9c8c
README.md edited online with Bitbucket
2014-12-28 21:51:58 +00:00
aa078db3fe
README.md edited online with Bitbucket
2014-10-27 21:55:04 +00:00
Marius Stanciu
Juan Pablo Caram
sopak