card-piv.c was not selecting the PIV AID correctly from piv_find_aid.
This cause a CAC card that also has the PIV application to fail a VERIFY command
of the pin would use a VERIFY APDU P2 where P2 for PIV is 80, but for CAC was 00.
A CAC card could work if the caller requested the serial number of the card
which did call piv_select_aid. All the OpenSC tools, minidriver and
PKCS#11 do this, but Tokend does not.
This is a partial fix for https://github.com/OpenSC/OpenSC/issues/570.
Tokend in later MacOS versions still has other issues.
A more complete solution is needed for cards with multiple applications.
I do not have a CAC card or MAC to do any testing.
Thanks to https://github.com/mouse07410 who has a CAC card, and a Mac,
and has tested this fix.
Removed cmap_record in sc_pkcs15_prkey_info (not used by any driver nor code)
Remove cardcf specific code (cardcf neutralized by CP_CACHE_MODE_NO_CACHE and it maintened by the Base CSP/KSP, not the minidriver)
Add conversion code for Windows GUID / OpenSC self computed GUID
For ECDSA signatures, there are multiple ways to format the signature:
- R|S (R and S filled with zeroes at the most significant bytes)
- ASN1 sequence of R,S integers (e.g. used by OpenSSL).
It is rare that the filling with zeroes is needed.
But if it is, in the second case, the filling zeroes should not be there
or the verification of the signature by OpenSSL will fail.
in cases where you use pam_pkcs11, HOME might not be set
so paths based on $HOME are not usable, so that the combination
of home and caching does not work. Having the paths configurable
(together with a good setting of access rights)
resolves that problem.
The special value still needs to be handled for commands that are issued
during card initialization. This especially concerns T=0 cards that need
to use iso_get_response.
fixes#533
regression of 85b79a3332
This adds support for the Yubikey NEO. I'm not sure whether it breaks
the specification, or follows some other version of the spec, but in my
testing it returns SW1=0x63, SW2=0x0N for N PIN tries remaining.
Ignoring the top nibble seems a harmless change to the behaviour to
support this device.
This is already supported for a couple of the card drivers, but
since it's a general feature of ISO7816 it should go in iso7816.c,
rather than the current situation where identical code for this is
copy and pasted in each driver.
However, some cards apparently don't support this feature and count
it as a failed PIN attempt, so I've added a flag for now to indicate
whether the card supports this feature. It future, it could be moved
to blacklist cards rather than whitelist them, subject to more testing.
If the reader announces extended length support, but the card driver
leaves max_send_size/max_recv_size at `0`, max_send_size/max_recv_size
previously would have been overwritten with the reader's size though the
card might not have set SC_CARD_CAP_APDU_EXT. This commit fixes this
behavior.
Additionally card->max_send_size/max_recv_size is always initialized to
a value different from 0 after the card initialization. This removes the
need to check for this special value in all subsequent calls.
../../src/libopensc/errors.h:73:37: warning: statement with no effect [-Wunused-value]
#define SC_ERROR_INVALID_ARGUMENTS -1300
^
card-masktech.c:181:48: note: in expansion of macro 'SC_ERROR_INVALID_ARGUMENTS'
if (crgram_len > SC_MAX_EXT_APDU_BUFFER_SIZE) SC_ERROR_INVALID_ARGUMENTS;
card-piv.c tries to read the first 8 bytes of an object to get object size
so it can allocate a buffer. It then reads the whole object. apdu.c has changed
over the years, and apdu.c will keep reading as long as the card returns
status of 61 XX thus apdu.c will read the whole object while discarding
the extra data and returning to the caller only the first part of the data.
This in effect causes a double read of objects.
This patch sets SC_APDU_FLAGS_NO_GET_RESP to tell apdu to stop doing the
extra get-response commands thus avoiding most of the extra overhead.
This in not an optimal patch as it only works with T=1 cards/readers
but the patch is confined to just card-piv.c.
A better patch is in the works.
Fixes#462
* factorize the code from CardAuthenticatePIN into CardAuthenticateEx
* allows authentication with the PINPAD without a UI
minidriver: fix some code analysis warnings
Prior to 066132327c71300188aa66180fde2fb3d90c5140, CKM_ECDH1_DERIVE and
CKM_ECDH1_COFACTOR_DERIVE were always registered for cards that support
SC_ALGORITHM_ECDSA_RAW.
The mentioned commit changed this behavior, so that the ECDH mechanisms
are only registered for cards that set the SC_ALGORITHM_ECDH_CDH_RAW
capability flag.
To keep the existing behavior for the cards, they need to set this flag
in the card driver.
This patch fixes 3 issues which consecutively have shown up when debugging the original problem:
1 - Newer DNIe report a byte count for public certificates which is the compressed size,
while older DNIe report the uncompressed size. This resulted in short-reading the x509 certificates,
and in an error parsing. Therefore, during initialization we proceed to set path->count for
public certificates to -1. This ensures that the lenght of the certificates for reading
will be set to file-> length, which has the correct size.
2 - pkcs11-tool -t was broken for DNIe (old and new)as it tried to strip pcks11 padding
from the data to sign and OpenSC tried signatures with non-padded data
(as the card had SC_ALGORITHM_RSA_RAW).
The new algoflags (SC_ALGORITHM_RSA_HASH_NONE | SC_ALGORITHM_RSA_PAD_PKCS1) and the
removal of the strip-padding call fix the issue.
3 - The new cards won't allow setting the LE bytes when calculating the TLV, when LE equals
256. This caused an wrong SM object error response (0x69 0x88). Therefore,
we don't send the LE bytes anymore in this case.
The patch has been tested to work on the new problematic card and on another old one.
close#451
card-masktech.c: fix building issues on the integration platform
card-masktech.c: fix linux compilation errors
honour HAVE_CONFIG_H
card-masktech.c: take in account Frank's remark about extended APDU in masktech_decipher
remove trailing spaces
In OpenSC the EC field_length is the number of bits in the field.
Most curves have a field_length which is a multiple of 8 bits
but there are many that are not.
The X and Y points and privateD are stored in octetstrings
so there may need to be an extra byte in the octetstring.
An OpenSSL BIGNUM will drop leading zero bytes, so its size can not be used
to determine the field_length.
fix#440fix#433
Compilation without OpenSSL - guid computation issue
This case is triggered when:
- built without OpenSSL
- called from a minidriver where id.len = 1
- card number is less than 15 bytes
(VTA: codding style slightly touched)
Basically checks that the memory allocation succeed.
The ctbcs.c change improve the readability
because count = 0 and len > 254 does not add any value.
VTA: added few coding style changes
Add a comment field to the ssh key output if a label is set on the key. Add RFC4716 compliant key output for the new breed of modern (mobile) SSH clients.
VTA: use short form of log call in iso7816
* iasecc_read_public_key function uses SC_SUCCESS instead of log level
value, hence the log output is always displayed. This uses
SC_LOG_DEBUG_NORMAL instead.
VTA: updated to use short form of LOG macro
There are few Java Cards that do not support ECDSA at all.
Starting with IsoApplet version 00.06, the applet returns whether the card
supports ECDSA or not. This commit uses this information to decider whether to
register ECDSA mechanisms or not.
Recent BELPIC cards (issued since March 2014) have a validity of 10
years (rather than 5 as before), and therefore also increased the key
size from 1024 bits to 2048 bits.
Key size can be detected by checking the applet version, for which we
have to issue a "GetCardData" command. If the applet is version 0x17 or
higher, keys are 2048 bits.
Use #defines rather than magic numbers
Keeps the code slightly more readable.
While we're at it, refactor slightly so that the code which issues the
GET CARD DATA command doesn't just keep the applet version, but also
makes other things available.
This latter in preparation of setting the serial number.
* This commit adds initial support for Morpho French Agent card which is an
IAS card. Signature operations are working. Since my test card was
read-only, I was unable to test object management functions.
* Add missing copy of AID in structure
The raw format of EC signature was invalid when 'r' and 's' had different length.
https://github.com/OpenSC/OpenSC/pull/381#issuecomment-77016382
According to PKCS#11 v2.20:
"If r and s have different octet length, the shorter of both must
be padded with leading zero octets such that both have the same octet length."
Use the new features of sc_asn1_put_tag introduced in OpenSC/OpenSC#314.
Additionally, a RSA private key is sent from one large buffer using either extended APDUs or chaining (in compliance to IsoApplet API version 00.05).
It is required to strip excessive zeroes returned by some Java Cards when removeing the ASN1 structural information for PKCS#11 so that the x/y can be calculated by dividing the signature length by 2. However, the leading zero may only be stripped if it is excessive (outside the field length). Otherwise generated signatures are wrong in rare cases (1 out of 256).
See: 189e998486
The IsoApplet requires the host to do the hashes with RSA. OpenSC will
add all hashes that are available in software and will not expect the
card to do the hashing.
Rework the EC key generation mechanism to send the curve parameters to
the card. In earlier versions, the applet had a copy of the curve
parameters and there was a different algorithm reference for every
curve. This is unfeasible when trying to support a larger number of
curves because of size limitations of the applet.
This commit additionally includes some refactorings that should not
change the functionality.
needed to store information about EC curve supported by card.
Primary usage is when importing/generating key to get know if particular curve is supported by card.
sc_pkcs15_get_object_guid() should prefer the serial number from
EF(TokenInfo) over card->serialnr because the user may override the
card's serial number with "pkcs15-init -C --serial". The card->serialnr
should be used before calling card CTL with SC_CARDCTL_GET_SERIALNR
because it might contain a cached value.
This change *should* allow cards to be used with the minidriver even if
SC_CARDCTL_GET_SERIALNR is not implemented. For example, a driver might
set card->serialnr at initialization or the user might initialize a
PKCS#15 card with its own "--serial".
See also the discussion at the mailing list:
[Opensc-devel] AT_SIGNATURE and AT_EXCHANGE Problem
b94c163 - invalid, non-tested
11881a6 -- src/libopensc/card-iasecc.c -- return from select has to be ignored,
3a92bf7 -- src/pkcs11/slot.c -- SEGFAULT issue #3733a92bf7 -- src/tools/piv-tool.c -- confirmed by author
6759c04 -- src/pkcs15init/pkcs15-lib.c -- file instantiation error has to be ignored
* With commit facaf59, access_flags were set for most cards. A closer look
revealed that this is already done in `sc_pkcs15emu_add_rsa_prkey`.
Therefore, this removes the duplicated code for cards calling this function.
Enhance sc_asn1_put_tag to support larger tag names and larger tags.
Prior to this, sc_asn1_put_tag did only support tags with a length of at most 127 bytes and tag names of one byte.
* Add default behavior for cards using the PKCS#15 emulation layer.
Hence, this patch provide a default value for access_flags compatible with
current OpenSC's behavior while allowing compatible cards to fetch the real
value from the card (IAS-ECC and AuthentIC).
Previously, partial DF name selection was used, which is not mandatory
to implement for a JCRE. We now use the full DF name which must always
be implemented.
Note that the MUSCLE applet is deprecated and should not be used.
fixes#135
If OpenSSL is not used then the functions from card-dnie.c are not
defined and in particular dnie_match_card() is not defined.
In that case we use a fake dnie_match_card() that just returns false.
add the possibility to store public ECC keys encoded according to SPKI
EC pubkey storing: Check if params are available before copying.
pkcs15-lib.c / sc_pkcs15init_store_public_key may be called with keyargs->key.u.ec.params.value == NULL. In this case, allocating and copying the parameters will fail. Add a check to prevent this.
The same function iasecc_sm_external_authentication() was declared in
two different .h files.
In file included from ../../src/libopensc/iasecc.h:27:0,
from sm-card-iasecc.c:44:
../../src/libopensc/iasecc-sdo.h:324:5: warning: redundant redeclaration of `iasecc_sm_external_authentication' [-Wredundant-decls]
In file included from ../../src/libopensc/opensc.h:44:0,
from sm-card-iasecc.c:40:
../../src/libopensc/sm.h:352:5: note: previous declaration of `iasecc_sm_external_authentication' was here
framework-pkcs15: Duplicate public key related to private key rather than referencing the framework object
Referencing the related public key is required to return PKCS#11 attributes for a private key only available
in the public key object (i.e. CKA_MODULUS). This patch adds a copy of the public key to the private key object rather than
referencing the public key object in the framework. This prevents SEGV when the public key framework object
is deleted with C_DestroyObject, but the reference from the public key remains intact.
The bug leads to all kind of stability problems when keys are created and deleted in the same session.
The patch is in particular important if OpenSC is used with EJBCA or any other application using the
SUN PKCS#11 provider: When generating key pairs, then the public key object is eventually garbage collected
which removes the related object in the PKCS#11 module. Because there is no fixed time for this operation,
corruption occurs at random.
In a next step, the remaining related_xxx fields in sc_pkcs11_object should be revised and possibly removed.
framework: Added more error checking
card-asepcos: removed dead code
card-authentic: removed dead code
card-belpic: removed dead code
card-epass2003: removed dead code
card-flex: removed dead code
card-gpk: removed dead code
card-oberthur: removed dead code
card-piv: removed dead code
card-setcos: removed dead code
ctbcs: removed dead code
cwa14890: removed dead code
muscle: removed dead code
pkcs15-atrust-acos: removed dead code
pkcs15-gemsafeV1: removed dead code
pkcs15-skey: removed dead code
reader-ctapi: removed dead code
framework-pkcs15: removed dead code
pkcs11-object: removed dead code
pkcs15-asepcos: removed dead code
pkcs15-cardos: removed dead code
pkcs15-jcop: removed dead code
pkcs15-lib: removed dead code
pkcs15-oberthur: removed dead code
parse: removed dead code
sclex: removed dead code
sm-card-authentic: removed dead code
sm-card-iasecc: removed dead code
sm-cwa14890: removed dead code
sm-global-platform: removed dead code
sc-test: removed dead code
pkcs11-tool: removed dead code
pkcs15-tool: removed dead code
Support nonces that are not only 8 bytes in
Mutual Authenticate. Use the witness length
to determine the nonce size, thus existing
systems using 8 bytes will continue to use 8
bytes. However, with AES 256, the nonces could
be a single block size of 16 bytes or greater.
This adds algorithm IDs 0xA, 0xA, 0xC which as documented
by the NIST PIV specification is algorithms AES-128, AES-192
and AES-256 respectively.
This patch also addresses some of the hardcodes that prevented
nonces greater than the single byte TLV length tags would allow.
It was explicitly tested with AES-256 and 256 byte nonces.
Signed-off-by: William Roberts <w2.roberts@samsung.com>
In old implementation, the DOs which their access is restricted by
PIN (like DOs 0101 -> 0104) were excluded from the fake filesystem,
leading to that we cannot read their data later, even if we verified PIN.