Marius Stanciu fd895e3c21 - in CNCJob UI Autolevelling - updated the UI with controls for probing GCode parameters and added signals and slots for the UI ... - in CNCJob UI Autolevelling - added a mini gcode sender for the GRBL to be able to send the probing GCode and get the height map (I may make a small and light app for that so it does not need to have FlatCAM on the GCode sender PC) - in CNCJob UI Autolevelling finished the probing GCode generation for MACH/LinuxCNC controllers; this GCode can also be viewed		2020-08-16 23:05:31 +03:00
..
AppObject.py	- added a Laser preprocessor named 'Z_laser' which will change the Z to the Travel Z on each ToolChange event allowing therefore control of the dot size	2020-07-23 00:44:33 +03:00
FlatCAMCNCJob.py	- in CNCJob UI Autolevelling - updated the UI with controls for probing GCode parameters and added signals and slots for the UI	2020-08-16 23:05:31 +03:00
FlatCAMDocument.py	- added some icons in the Code Editor	2020-07-18 00:26:03 +03:00
FlatCAMExcellon.py	- made sure there are no issues when plotting the Excellon object in one thread and trying to build the UI in another by using a signal	2020-07-21 15:58:22 +03:00
FlatCAMGeometry.py	- Tool Cutout - some work in gaps thickness control for the free form cutout	2020-08-13 22:38:39 +03:00
FlatCAMGerber.py	- fixed a bug in the FlatCAMGerber.on_mark_cb_click_table() method when moving a Gerber object	2020-07-20 19:21:17 +03:00
FlatCAMObj.py	- Gerber UI - optimized the mark shapes to use only on ShapeCollection	2020-07-12 01:36:21 +03:00
FlatCAMScript.py	- added some icons in the Code Editor	2020-07-18 00:26:03 +03:00
ObjectCollection.py	- Tool Drilling - working on the UI	2020-07-08 15:51:03 +03:00
__init__.py	- remade file names in the app	2020-06-03 20:35:59 +03:00