Camlib¶
Geometry¶
- class camlib.Geometry¶
- bounds()¶
Returns coordinates of rectangular bounds of geometry: (xmin, ymin, xmax, ymax).
- clear_polygon(polygon, tooldia, overlap=0.15)¶
Creates geometry inside a polygon for a tool to cover the whole area.
- convert_units(units)¶
Converts the units of the object to units by scaling all the geometry appropriately. This call scale(). Don’t call it again in descendents.
Parameters: units (str) – “IN” or “MM” Returns: Scaling factor resulting from unit change. Return type: float
- from_dict(d)¶
Sets object’s attributes from a dictionary. Attributes to include are listed in self.ser_attrs. This method will look only for only and all the attributes in self.ser_attrs. They must all be present. Use only for deserializing saved objects.
Parameters: d (dict) – Dictionary of attributes to set in the object. Returns: None
- get_empty_area(boundary=None)¶
Returns the complement of self.solid_geometry within the given boundary polygon. If not specified, it defaults to the rectangular bounding box of self.solid_geometry.
- isolation_geometry(offset)¶
Creates contours around geometry at a given offset distance.
Parameters: offset (float) – Offset distance. Returns: The buffered geometry. Return type: Shapely.MultiPolygon or Shapely.Polygon
- offset(vect)¶
Offset the geometry by the given vector. Override this method.
Parameters: vect (tuple) – (x, y) vector by which to offset the object. Returns: None
- scale(factor)¶
Scales all of the object’s geometry by a given factor. Override this method. :param factor: Number by which to scale. :type factor: float :return: None :rtype: None
- size()¶
Returns (width, height) of rectangular bounds of geometry.
- to_dict()¶
Returns a respresentation of the object as a dictionary. Attributes to include are listed in self.ser_attrs.
Returns: A dictionary-encoded copy of the object. Return type: dict
Gerber¶
- class camlib.Gerber(Geometry)¶
ATTRIBUTES
- apertures (dict): The keys are names/identifiers of each aperture. The values are dictionaries key/value pairs which describe the aperture. The type key is always present and the rest depend on the key:
Key Value type (str) “C”, “R”, “O”, “P”, or “AP” others Depend on type - paths (list): A path is described by a line an aperture that follows that line. Each paths[i] is a dictionary:
Key Value linestring (Shapely.LineString) The actual path. aperture (str) The key for an aperture in apertures. - flashes (list): Flashes are single-point strokes of an aperture. Each is a dictionary:
Key Value loc (Point) Shapely Point indicating location. aperture (str) The key for an aperture in apertures. - regions (list): Are surfaces defined by a polygon (Shapely.Polygon), which have an exterior and zero or more interiors. An aperture is also associated with a region. Each is a dictionary:
Key Value polygon (Shapely.Polygon) The polygon defining the region. aperture (str) The key for an aperture in apertures. - aperture_macros (dictionary): Are predefined geometrical structures that can be instanciated with different parameters in an aperture definition. See apertures above. The key is the name of the macro, and the macro itself, the value, is a Aperture_Macro object.
- flash_geometry (list): List of (Shapely) geometric object resulting from flashes. These are generated from flashes in do_flashes().
- buffered_paths (list): List of (Shapely) polygons resulting from buffering (or thickening) the paths with the aperture. These are generated from paths in buffer_paths().
USAGE:
g = Gerber() g.parse_file(filename) g.create_geometry() do_something(s.solid_geometry)
- aperture_parse(apertureId, apertureType, apParameters)¶
Parse gerber aperture definition into dictionary of apertures. The following kinds and their attributes are supported:
- Circular (C): size (float)
- Rectangle (R): width (float), height (float)
- Obround (O): width (float), height (float).
- Polygon (P): diameter(float), vertices(int), [rotation(float)]
- Aperture Macro (AM): macro (ApertureMacro), modifiers (list)
Parameters: - apertureId (str) – Id of the aperture being defined.
- apertureType (str) – Type of the aperture.
- apParameters (str) – Parameters of the aperture.
Returns: Identifier of the aperture.
Return type: str
- buffer_paths()¶
This is part of the parsing process. “Thickens” the paths by their appertures. This will only work for circular appertures.
Returns: None
- create_geometry()¶
Geometry from a Gerber file is made up entirely of polygons. Every stroke (linear or circular) has an aperture which gives it thickness. Additionally, aperture strokes have non-zero area, and regions naturally do as well.
:rtype : None :return: None
- do_flashes()¶
Creates geometry for Gerber flashes (aperture on a single point).
- fix_regions()¶
Overwrites the region polygons with fixed versions if found to be invalid (according to Shapely).
Returns: None
- frac_digits = None¶
Number of fraction digits in Gerber numbers. Used during parsing.
- get_bounding_box(margin=0.0, rounded=False)¶
Creates and returns a rectangular polygon bounding at a distance of margin from the object’s solid_geometry. If margin > 0, the polygon can optionally have rounded corners of radius equal to margin.
Parameters: - margin (float) – Distance to enlarge the rectangular bounding box in both positive and negative, x and y axes.
- rounded (bool) – Wether or not to have rounded corners.
Returns: The bounding box.
Return type: Shapely.Polygon
- int_digits = None¶
Number of integer digits in Gerber numbers. Used during parsing.
- mirror(axis, point)¶
Parameters: - axis (str) – “X” or “Y” indicates around which axis to mirror.
- point (list) – [x, y] point belonging to the mirror axis.
Returns: None
- offset(vect)¶
Offsets the objects’ geometry on the XY plane by a given vector. These are:
- paths
- regions
- flashes
Then buffered_paths, flash_geometry and solid_geometry are re-created with self.create_geometry().
Parameters: vect (tuple) – (x, y) offset vector. Returns: None
- parse_file(filename)¶
Calls Gerber.parse_lines() with array of lines read from the given file.
Parameters: filename (str) – Gerber file to parse. Returns: None
- parse_lines(glines)¶
Main Gerber parser. Reads Gerber and populates self.paths, self.apertures, self.flashes, self.regions and self.units.
Parameters: glines (list) – Gerber code as list of strings, each element being one line of the source file. Returns: None Return type: None
- scale(factor)¶
Scales the objects’ geometry on the XY plane by a given factor. These are:
- apertures
- paths
- regions
- flashes
Then buffered_paths, flash_geometry and solid_geometry are re-created with self.create_geometry(). :param factor: Number by which to scale. :type factor: float :rtype : None
ApertureMacro¶
- class camlib.ApertureMacro(name=None)¶
- append(data)¶
Appends a string to the raw macro.
Parameters: data (str) – Part of the macro. Returns: None
- static default2zero(n, mods)¶
Pads the mods list with zeros resulting in an list of length n.
Parameters: - n (int) – Length of the resulting list.
- mods (list) – List to be padded.
Returns: Zero-padded list.
Return type: list
- static make_centerline(mods)¶
Parameters: mods – (Exposure 0/1, width >=0, height >=0, x-center, y-center, rotation angle around origin in degrees) Returns:
- static make_circle(mods)¶
Parameters: mods – (Exposure 0/1, Diameter >=0, X-coord, Y-coord) Returns:
- make_geometry(modifiers)¶
Runs the macro for the given modifiers and generates the corresponding geometry.
Parameters: modifiers (list) – Modifiers (parameters) for this macro
- static make_lowerleftline(mods)¶
Parameters: mods – (exposure 0/1, width >=0, height >=0, x-lowerleft, y-lowerleft, rotation angle around origin in degrees) Returns:
- static make_moire(mods)¶
Note: Specs indicate that rotation is only allowed if the center (x, y) == (0, 0). I will tolerate breaking this rule.
Parameters: mods – (x-center, y-center, outer_dia_outer_ring, ring thickness, gap, max_rings, crosshair_thickness, crosshair_len, rotation angle around origin in degrees) Returns:
- static make_outline(mods)¶
Parameters: mods – Returns:
- static make_polygon(mods)¶
Note: Specs indicate that rotation is only allowed if the center (x, y) == (0, 0). I will tolerate breaking this rule.
Parameters: mods – (exposure 0/1, n_verts 3<=n<=12, x-center, y-center, diameter of circumscribed circle >=0, rotation angle around origin) Returns:
- static make_thermal(mods)¶
Note: Specs indicate that rotation is only allowed if the center (x, y) == (0, 0). I will tolerate breaking this rule.
Parameters: mods – [x-center, y-center, diameter-outside, diameter-inside, gap-thickness, rotation angle around origin] Returns:
- static make_vectorline(mods)¶
Parameters: mods – (Exposure 0/1, Line width >= 0, X-start, Y-start, X-end, Y-end, rotation angle around origin in degrees) Returns:
- parse_content()¶
Creates numerical lists for all primitives in the aperture macro (in self.raw) by replacing all variables by their values iteratively and evaluating expressions. Results are stored in self.primitives.
Returns: None
Excellon¶
- class camlib.Excellon(Geometry)¶
ATTRIBUTES
- tools (dict): The key is the tool name and the value is a dictionary specifying the tool:
Key Value C Diameter of the tool Others Not supported (Ignored). - drills (list): Each is a dictionary:
Key Value point (Shapely.Point) Where to drill tool (str) A key in tools - create_geometry()¶
Creates circles of the tool diameter at every point specified in self.drills.
Returns: None
- mirror(axis, point)¶
Parameters: - axis (str) – “X” or “Y” indicates around which axis to mirror.
- point (list) – [x, y] point belonging to the mirror axis.
Returns: None
- offset(vect)¶
Offsets geometry on the XY plane in the object by a given vector.
Parameters: vect (tuple) – (x, y) offset vector. Returns: None
- parse_file(filename)¶
Reads the specified file as array of lines as passes it to parse_lines().
Parameters: filename (str) – The file to be read and parsed. Returns: None
- parse_lines(elines)¶
Main Excellon parser.
Parameters: elines (list) – List of strings, each being a line of Excellon code. Returns: None
- scale(factor)¶
Scales geometry on the XY plane in the object by a given factor. Tool sizes, feedrates an Z-plane dimensions are untouched.
Parameters: factor (float) – Number by which to scale the object. Returns: None Return type: NOne
CNCJob¶
- class camlib.CNCjob(Geometry)¶
Represents work to be done by a CNC machine.
ATTRIBUTES
- gcode_parsed (list): Each is a dictionary:
Key Value geom (Shapely.LineString) Tool path (XY plane) kind (string) “AB”, A is “T” (travel) or “C” (cut). B is “F” (fast) or “S” (slow). - gcode_parse()¶
G-Code parser (from self.gcode). Generates dictionary with single-segment LineString’s and “kind” indicating cut or travel, fast or feedrate speed.
- generate_from_excellon(exobj)¶
Generates G-code for drilling from Excellon object. self.gcode becomes a list, each element is a different job for each tool in the excellon code.
- generate_from_excellon_by_tool(exobj, tools='all')¶
Creates gcode for this object from an Excellon object for the specified tools.
Parameters: - exobj (Excellon) – Excellon object to process
- tools – Comma separated tool names
Type: tools: str
Returns: None
Return type: None
- generate_from_geometry(geometry, append=True, tooldia=None, tolerance=0)¶
Generates G-Code from a Geometry object. Stores in self.gcode.
Parameters: - geometry (Geometry) – Geometry defining the toolpath
- append (bool) – Wether to append to self.gcode or re-write it.
- tooldia (bool) – If given, sets the tooldia property but does not affect the process in any other way.
- tolerance – All points in the simplified object will be within the tolerance distance of the original geometry.
Returns: None
Return type: None
- linear2gcode(linear, tolerance=0)¶
Generates G-code to cut along the linear feature.
Parameters: - linear – The path to cut along.
- tolerance (float) – All points in the simplified object will be within the tolerance distance of the original geometry.
Type: Shapely.LinearRing or Shapely.Linear String
Returns: G-code to cut alon the linear feature.
Return type: str
- offset(vect)¶
Offsets all the geometry on the XY plane in the object by the given vector.
Parameters: vect (tuple) – (x, y) offset vector. Returns: None
- plot2(axes, tooldia=None, dpi=75, margin=0.1, color={'C': ['#5E6CFF', '#4650BD'], 'T': ['#F0E24D', '#B5AB3A']}, alpha={'C': 1.0, 'T': 0.3}, tool_tolerance=0.0005)¶
Plots the G-code job onto the given axes.
Parameters: - axes – Matplotlib axes on which to plot.
- tooldia – Tool diameter.
- dpi – Not used!
- margin – Not used!
- color – Color specification.
- alpha – Transparency specification.
- tool_tolerance – Tolerance when drawing the toolshape.
Returns: None
- polygon2gcode(polygon, tolerance=0)¶
Creates G-Code for the exterior and all interior paths of a polygon.
Parameters: - polygon (Shapely.Polygon) – A Shapely.Polygon
- tolerance (float) – All points in the simplified object will be within the tolerance distance of the original geometry.
Returns: G-code to cut along polygon.
Return type: str
- pre_parse(gtext)¶
Separates parts of the G-Code text into a list of dictionaries. Used by self.gcode_parse().
Parameters: gtext – A single string with g-code
- scale(factor)¶
Scales all the geometry on the XY plane in the object by the given factor. Tool sizes, feedrates, or Z-axis dimensions are not altered.
Parameters: factor (float) – Number by which to scale the object. Returns: None Return type: None