2deba3a8f9
- in CNCJob UI Autolevelling - GRBL controller - added handlers for the Zeroing and for Homing and for Pause/Resume; some UI optimizations
2020-08-22 03:34:45 +03:00
1b31abeb62
- in CNCJob UI Autolevelling - GRBL controller - Control: added a Origin button; changed the UI to have rounded rectangles
...
- in CNCJob UI Autolevelling - GRBL controller - Control: added feedrate and step size controls and added them in Preferences
2020-08-21 18:08:40 +03:00
a75e7e5cf8
- in CNCJob UI Autolevelling - GRBL Sender - now only a single command can be sent
...
- in CNCJob UI Autolevelling - GRBL controller - changed the UI
- in CNCJob UI Autolevelling - added some VOronoi poly calculations
2020-08-19 17:20:05 +03:00
d62793c9bd
- in CNCJob UI Autolevelling - GRBL Control and Sender tabs are disabled when the serial port is disconnected
2020-08-19 04:44:50 +03:00
7285ee0b82
- in CNCJob UI Autolevelling - Grbl Connect tab colors will change with the connection status
2020-08-19 04:36:46 +03:00
3afcabe559
- in CNCJob UI Autolevelling - added handlers for GRBL report and for getting GRBL parameters
2020-08-19 03:44:16 +03:00
56ac489466
- in CNCJob UI Autolevelling - added handlers for: jogging, reset, sending commands
2020-08-19 02:26:35 +03:00
bdb0e71425
- in CNCJob UI Autolevelling - in COntrol section added buttons for Jog an individual axes zeroing
2020-08-18 17:51:25 +03:00
d1733f1e1d
- in Doublesided Tool added some UI for Excellon hole snapping
2020-08-18 15:30:33 +03:00
85a0d3da9f
- in CNCJob UI Autolevelling - GRBL GUI controls are now organized in a tab widget
2020-08-17 15:50:51 +03:00
495947f8c5
- in CNCJob UI Autolevelling - made autolevelling checkbox state persistent between app restarts
2020-08-17 02:31:51 +03:00
3ef47da370
- in CNCJob UI Autolevelling - Added entries in Preferences
2020-08-17 00:40:45 +03:00
fd895e3c21
- in CNCJob UI Autolevelling - updated the UI with controls for probing GCode parameters and added signals and slots for the UI
...
- in CNCJob UI Autolevelling - added a mini gcode sender for the GRBL to be able to send the probing GCode and get the height map (I may make a small and light app for that so it does not need to have FlatCAM on the GCode sender PC)
- in CNCJob UI Autolevelling finished the probing GCode generation for MACH/LinuxCNC controllers; this GCode can also be viewed
2020-08-16 23:05:31 +03:00
5af8918441
- in CNCJob UI worked on the UI for the Autolevelling
...
- in CNCJob UI finished working on adding test points in Grid mode
2020-08-14 12:46:27 +03:00
298976f32e
- CNCJob object - working in generating Voronoi diagram for autolevelling
2020-08-14 02:03:03 +03:00
daf66ae58c
- in CNCJob UI updated the GUI for Autolevelling
2020-08-13 17:32:54 +03:00
fff0d6efc1
- in CNCJob UI added GUI for an eventual Autolevelling feature
2020-08-13 15:13:07 +03:00
e4852292b7
- removed the Toolchange Macro feature (in the future it will be replaced by full preprocessor customization)
...
- modified GUI in Preferences
2020-08-04 13:33:58 +03:00
eb28d28ea2
- GCode Editor - modified the UI
2020-08-03 23:20:41 +03:00
ffda89f949
- GCode Editor - can not delete objects while in the Editor; can not close the Code Editor Tab except on Editor exit; activated the shortcut keys (for now only CTRL+S is working)
2020-08-03 22:01:42 +03:00
44411cdc82
- GCode Editor - closing the Editor will close also the Code Editor Tab
...
- cleanup of the CNCJob UI; added a checkbox to signal if any append/prepend gcode was set in Preferences (unchecking it will override and disable the usage of the append/prepend GCode)
- the start Gcode is now stored in the CNCJob object attribute gc_start
- GCode Editor - finished adding the ability to select a row in the Tools table and select the related GCode
2020-08-02 16:27:30 +03:00
9e8ab610b4
- working on a proper GCode Editor
2020-07-22 15:49:52 +03:00
687efd1fc0
- Excellon UI: made sure that when the Multicolor checkbox is unchecked, the color is updated in the Color column of the tools table
2020-07-21 07:20:14 +03:00
617b483267
- Excellon UI: added a column which will color each row/tool of that column in the color used when checking Multicolor checkbox
2020-07-21 06:49:49 +03:00
51290a6b8b
- Excellon UI in Legacy Mode (2D): fixed the Solid checkbox functionality
2020-07-21 06:08:48 +03:00
e57820f707
- fixed MultiColor checkbox in Excellon Object to work in Legacy Mode (2D)
...
- modified the visibility change in Excellon UI to no longer do plot() when doing visibility toggle for one of the tools but only a visibility change in the shapes properties
2020-07-21 06:01:04 +03:00
e99dd967fe
- updated the FCRadio class with a method that allow disabling certain options
...
- the Path optimization options for Excellon and Geometry objects are now available depending on the OS platform used (32bit vs 64bit)
2020-07-21 00:57:26 +03:00
a3e1570747
- added a control in Preferences -> Gerber Tab for Gerber colors storage usage
...
- made sure that the defaults on first install will set the number of workers to half the number of CPU's on the system but no less than 2
2020-07-21 00:04:18 +03:00
8409c74e23
- added some icons in the Code Editor
...
- replaced some icons in the app
- in Code Editor, when changing text, the Save Code button will change color (text and icon) to red and after save it will revert the color to the default one
- in Code Editor some methods rework
2020-07-18 00:26:03 +03:00
144a89f686
- added a new method for GCode generation for Geometry objects
...
- added multiple algorithms for path optimization when generating GCode from an Geometry object beside the original Rtree algorithm: TSA, OR-Tools Basic, OR-Tools metaheuristics
- added controls for Geometry object path optimization in Preferences
2020-07-16 04:55:58 +03:00
a041d27c4b
- minor change in strings
2020-07-15 21:19:11 +03:00
0fc6f41177
- added some icons to more push buttons inside the app
...
- a change of layout in Tools Database
2020-07-15 21:11:47 +03:00
7b891900be
- added Editor Push buttons in Geometry and CNCJob UI's
2020-07-15 03:31:39 +03:00
66adab95ca
- added icons to some of the push buttons
2020-07-15 02:23:45 +03:00
5badd7a26b
- Gerber UI - optimized the mark shapes to use only on ShapeCollection
2020-07-14 14:20:19 +03:00
22d05935e8
- fixed a bug in Tools Database: due of not disconnecting the signals it created a race that was concluded into a RuntimeError exception (an dict changed size during iteration)
...
- Drilling Tool - working in adding tools auto-load from Tools DB
- some updates to the Excellon Object options
- Drilling Tool - manual add from Tools DB is working
2020-07-13 03:04:44 +03:00
329bb04b3c
- Gerber UI - optimized the mark shapes to use only on ShapeCollection
2020-07-12 01:36:21 +03:00
eee56a8f2f
- Geometry UI - moved the UI for polishing from Isolation Tool to Geometry UI (actually in the future Milling Tool) where it belongs
2020-07-11 03:51:25 +03:00
13bcc036df
- moved all Excellon Advanced Prefeences to Drilling Tool Preferences
...
- updated Drilling Tool to use the new settings
- updated the Excellon Editor: the default_data dict is populated now on Editor entry
- Excellon Editor: added a new functionality: conversion of slots to drills
- Excellon UI: added a new feature that is grouped in Advanced Settings: a toggle tools table visibility checkbox
2020-07-11 01:42:44 +03:00
24192540d7
- in Gerber and Excellon UI added buttons to start the Editor
...
- in all Editors Selected Tab added a button to Exit the Editor
2020-07-10 05:03:54 +03:00
0dee41e03c
- Tool Drilling - moved some of the Excellon Preferences related to drilling operation to it's own group Drilling Tool Options
...
- optimized the CNCJob UI to look like other parts of the app
2020-07-10 04:39:25 +03:00
494963ed04
- working in cleaning up the Excellon UI (Selected Tab)
...
- finished the clean-up in Excellon UI
2020-07-09 05:58:11 +03:00
6edd7f051a
- Tool Drilling - working on the UI
...
- Tool Drilling - added more tool parameters; laying the ground for adding "Drilling Slots" feature
2020-07-08 15:51:03 +03:00
0c957a3365
- working in making a new functionality: Convert Any to Excellon. Finished Geometry object conversion to Excellon.
2020-07-03 03:20:56 +03:00
ce5ad816c5
- Drilling Tool - UI is working as expected; I will have to propagate the changes to other tools too, to increase likeness between different parts of the app
2020-06-27 01:06:10 +03:00
8dc4eecbf4
- Panelize Tool - add a new option for the panels of type Geometry named Path Optimiztion. If the checkbox is checked then all the LineStrings that are overlapped in the resulting multigeo Geometry panel object will keep only one of the paths thus minimizing the tool cuts.
2020-06-18 18:50:02 +03:00
79fec61934
- fixed bug in the Cutout Tool that did not allowed the manual cutous to be added on a Geometry created in the Tool
...
- fixed bug that made the selection box show in the stage of adding manual gaps
- updated Cutout Tool UI
- Cutout Tool - in manual gap adding there is now an option to automatically turn on the big cursor which could help
- Cutout Tool - fixed errors when trying to add a manual gap without having a geometry object selected in the combobox
2020-06-18 14:26:24 +03:00
c9d66381bf
- added fuse tools control in Preferences UI for the Excellon objects: if checked the app will try to see if there are tools with same diameter and merge the drills for those tools; if not the tools will just be added to the new combined Excellon
2020-06-17 10:36:02 +03:00
949c265378
- changed the data structure for the Excellon object; modified the Excellon parser and the Excellon object class
...
- fixed partially the Excellon Editor to work with the new data structure
- fixed Excellon export to work with the new data structure
- fixed all transformations in the Excellon object attributes; still need to fix the App Tools that creates or use Exellon objects
2020-06-16 03:47:26 +03:00
30d5400da1
- created a new App Tool named Drilling Tool where I will move the drilling out of the Excellon UI
2020-06-15 19:14:50 +03:00
Marius Stanciu