Marius Stanciu
7c9c390ac3
- finished Punch Gerber Tool
...
- minor PEP8 changes
2020-02-13 21:06:10 +02:00
Marius Stanciu
d33505096c
- modified the Excellon GCode generation so now it can use multi depth drilling; modified the preprocessors to show the number of passes
2020-02-08 22:38:08 +02:00
Marius Stanciu
48029da52b
- added a new preprocessor file for using laser on a Marlin motion controller but with the laser connected to one of the FAN pins, named 'Marlin_laser_use_FAN_pin'
2020-02-08 20:38:51 +02:00
Marius Stanciu
9911402c95
- added a new preprocessor for using laser on a Marlin 3D printer named 'Marlin_laser'
...
- modified the Geometry UI when using laser preprocessors
2020-02-08 18:01:32 +02:00
Marius Stanciu
23a1495c32
- fixed the preprocessors with 'laser' in the name to use the spindle direction set in the Preferences
...
- increased the upper limit for feedrates by an order of magnitude
2020-02-03 14:46:39 +02:00
Marius Stanciu
10d4ed512b
- modified Spinbox and DoubleSpinbox Custom UI elements such that they issue a warning status message when the typed value is out of range
2020-02-03 02:18:28 +02:00
Marius Stanciu
31c0cd0952
- small changes in Gerber UI
...
- in Geometry Editor make sure that after an edit is finished (correctly or forced) the QTree in the Editor UI is cleared of items
2020-02-03 00:43:38 +02:00
Marius Stanciu
c7074d71ba
- fixed an error in Gerber Parser; the initial values for currnet_x, current_y were None but should have been 0.0
...
- limited the lower limit of angle of V-tip to a value of 1 because 0 makes no sense
2020-02-02 15:54:09 +02:00
Marius Stanciu
0b162bbd55
- added a new functionality, a variation of Set Origin named Move to Origin. It will move a selection of objects to origin such as the bottom left corner of the bounding box that fit them all is in origin.
2020-01-31 22:34:20 +02:00
Marius Stanciu
ece94b7f60
- some UI changes in the common object UI
2020-01-30 06:26:14 +02:00
Marius Stanciu
a44d7b97b5
- some changed in the Excellon UI
2020-01-30 05:55:46 +02:00
Marius Stanciu
cd45276819
- updated 2Sided Tool
2020-01-29 21:49:22 +02:00
Marius Stanciu
fd0438842d
- finished adding in Geometry Editor a TreeWidget with the geometry shapes found in the edited object
2020-01-28 03:59:15 +02:00
Marius Stanciu
fbf0b8606e
- made some structural changes in Properties Tool
2020-01-27 17:20:06 +02:00
Marius Stanciu
aa7bc125f4
- the Jump To popup window will now autoselect the LineEdit therefore no more need for an extra click after launching the function
2020-01-27 15:27:34 +02:00
Marius Stanciu
3ac8e96071
- fixed bugs in Minimum Distance Tool
2020-01-25 01:44:44 +02:00
Marius Stanciu
ca87475694
- small changes to the Toolchange manual preprocessor
...
- fix for plotting Excellon objects if the color is changed and then the object is moved
- laying the GUI for a new Tool: Punch Gerber Tool which will add holes in the Gerber apertures
2020-01-24 22:12:15 +02:00
Marius Stanciu
5b63dee50d
- made possible to set the colors for Excellon objects too
...
- added to the possible colors the fundamentals: black and white
- in the project context menu for setting colors added the option to set the transparency and also a default option which revert the color to the default value set in the Preferences
2020-01-19 19:47:42 +02:00
Marius Stanciu
316b04a56a
- wip
2020-01-17 03:44:34 +02:00
Marius Stanciu
eae5b3d8e3
- changes to Geometry UI
2020-01-17 03:42:50 +02:00
Marius Stanciu
957903d307
- more changes to Excellon UI
2020-01-17 03:15:13 +02:00
Marius Stanciu
0221a9cfb6
- updated the Excellon and Geometry UI to be similar
...
- put bases for future changes to Excellon Object UI such that each tool will hold it's own parameters
2020-01-16 15:49:51 +02:00
Marius Stanciu
24e01ad518
- a small change in the Excellon UI
2020-01-16 02:33:54 +02:00
Marius Stanciu
5ffa9b6470
- updated the GUI in preferences for Calculator Tool
2020-01-16 02:21:20 +02:00
Marius Stanciu
3c569fdf6c
- updated/optimized the GUI in Preferences for Paint Tool and for NCC Tool
...
- work in Paint Tool to bring it up to date with NCC Tool
2020-01-16 02:07:00 +02:00
Marius Stanciu
821014f719
- added key shortcuts and toolbar icons for the new tools: Align Object Tool (ALT+A) and Extract Drills (ALT+I)
...
- added new functionality (key shortcut SHIFT+J) to locate the corners of the bounding box (and center) in a selected object
2020-01-15 02:50:27 +02:00
Marius Stanciu
9a3f3b600b
- in Extract Drill Tool added a new method of drills extraction. The methods are: fixed diameter, fixed annular ring and proportional
...
- in Align Objects Tool finished the Single Point method of alignment
2020-01-14 16:23:23 +02:00
Marius Stanciu
f8c22ea32f
- Extract Drills Tool: fixed issue with oblong pads and with pads made from aperture macros
...
- Extract Drills Tool: added controls in Edit -> Preferences
2020-01-12 00:30:17 +02:00
Marius Stanciu
c28f08a392
- fixed an issue in the Distance Tool
...
- expanded the Extract Drills Tool to use a particular annular ring for each type of aperture flash (pad)
2020-01-11 17:30:48 +02:00
Marius Stanciu
7d0a792085
- small changes
2020-01-10 14:55:32 +02:00
Marius Stanciu
2ff9cd2439
- print() debugging
2020-01-10 13:00:47 +02:00
Marius Stanciu
8c33f6e0be
- added some prints to work on issue 349
2020-01-09 12:44:24 +02:00
Marius Stanciu
856f568f9e
- selected rows in the Tools Tables will stay colored in blue after loosing focus instead of the default gray
...
- in NCC Tool the Tool name in the Parameters section will be the Tool ID in the Tool Table
- added an exception catch in case the plotcanvas init failed for the OpenGL graphic engine and warn user about what happened
2020-01-09 00:06:38 +02:00
Marius Stanciu
e090b96c7c
- modified Toggle Workspace function to work in the new Preferences UI configuration
...
- cleaned the app from progress signal usage since it is not used anymore
2020-01-03 01:41:03 +02:00
Marius Stanciu
6f5a775388
- for auto-completer, now clicking an entry in the completer popup will select that entry and insert it
2020-01-02 05:06:08 +02:00
Marius Stanciu
fd9d18b52b
- started to rework the NCC Tool GUI in preparation for adding a Tool DB feature
2020-01-02 04:28:18 +02:00
Marius Stanciu
84c8588f89
- fixed the Drillcncjob Tcl command by adding an custom self.options key "Tools_in_use" and build it's value, in case it does not exist, to make the toolchange command work
...
- middle mouse click on closable tabs will close them
2020-01-02 01:50:49 +02:00
Marius Stanciu
3475ae00cd
- fixed bug in NCC Tool: after trying to add a tool already in the Tool Table when trying to change the Tool Type the GUI does not change
...
- final fix for app not quiting when running a script as argument, script that has the quit_flatcam Tcl command; fixed issue #360
- fixed issue #363 . The Tcl command drillcncjob does not create tool cut, does not allow creation of gcode, it forces the usage of dwell and dwelltime parameters
2020-01-01 16:13:33 +02:00
Marius Stanciu
841e1f3eeb
- fixed Tcl commands that use the overlap parameter to switch from fraction to percentage
...
- in Transform Tool mae sure that the buffer sub-tool parameters are better explained in tooltips
2019-12-30 22:04:39 +02:00
Marius Stanciu
f7eaf62606
- changes in the Preferences UI for NCC and Paint Tool in Tool Dia entry field
2019-12-30 17:07:43 +02:00
Marius Stanciu
c0ec3b6546
- Buffer sub-tool in Transform Tool: added the possibility to apply a factor effectively scaling the aperture size thus the copper features sizes
...
- in Transform Tool adjusted the GUI
2019-12-30 01:18:56 +02:00
Marius Stanciu
7bd441eccc
- in Paint Tool Preferences allowed to add a list of initial tools separated by comma
...
- in Geometry Paint Tool fixed the Overlap rate to work between 0 and 99.9999%
2019-12-29 22:51:22 +02:00
Marius Stanciu
a66658f2e2
- fixed a small where the app tried to hide a label that I've removed previously
2019-12-29 21:36:34 +02:00
Marius Stanciu
c79f74c1bf
- added a new function called by shortcut key combo CTRL+G when the current widget in Plot Area is an Code Editor. It will jump to the specified line in the text.
2019-12-29 04:31:46 +02:00
Marius Stanciu
58054f71b3
- fixed a minor issue that when saving a project with CNCJob objects, the variable that holds the origin of the CNCJob object was not saved in the project. Added to the serializable objects also the exc_cnc_tools dictionary
...
- some changes in the File menu
2019-12-29 00:00:15 +02:00
camellan
a81460788d
Update translation
2019-12-28 23:22:26 +04:00
Camellan
8cc5b28410
jpcgt/flatcam/Beta слито с Beta
2019-12-28 22:44:16 +04:00
Marius Stanciu
47fe73a91b
- more updates to the Preferences window and in some other parts of the GUI
...
- updated the translations (less Russian)
2019-12-28 20:38:44 +02:00
camellan
41bcc135ff
Merge remote-tracking branch 'remotes/jpcgt/flatcam/Beta' into Beta
2019-12-28 21:12:45 +04:00
Marius Stanciu
3c991e1c2d
- updated all the translations files
...
- fixed the big mouse cursor in OpenGL(3D) graphic mode to get the set color
- fixed the cursor to have the set color and set cursor width in the Legacy(2D) graphic engine
- in Legacy(2D) graphic mode fixed the cursor toggle when the big cursor is activated
- in Legacy(2D) fixed big mouse cursor to snap to the grid
- RELEASE 8.991
2019-12-28 03:59:05 +02:00