f6cd63021e
- fixed some of the strings that were left in the old way
...
- updated the POT file
- updated Romanian language partially
2019-09-13 18:27:00 +03:00
19444fb28c
- upgraded the Script Editor to be able to run Tcl commands in batches
...
- added some ToolTips for the buttons in the Code Editor
2019-09-13 13:52:55 +03:00
91cad9c57d
- added the Gerber code as source for the panelized object in Panelize Tool
...
- whenever a Gerber file is deleted, the mark_shapes objects are deleted also
2019-09-11 04:54:30 +03:00
4114e773dd
- when disabling plots, if the selection shape is visible, it will be deleted
...
- small changes in Tool Panel (eliminating some deepcopy() calls)
- made sure that all the progress counters count to 100%
2019-09-10 16:05:54 +03:00
f658e05240
- added progress and possibility of graceful exit in Panel Tool
...
- added graceful exit possibility when creating Isolation
2019-09-10 15:08:42 +03:00
7341e089dd
- fixed an object used before declaring it in NCC Tool - Area option
2019-09-10 12:50:20 +03:00
59704a6e01
- fixed issue when loading unbuffered a Gerber file that has negative regions
...
- fixed Panelize Tool to save the aperture geometries into the panel apertures. Also made the tool faster by removing the buffering at the end of the job
- modified FlatCAMEditor's files to the new string format that will allow easier translations
- updated POT file and the Romanian translation
2019-09-10 03:20:14 +03:00
2bd730ceeb
- some fixes in Paint Tool when done over the Gerber objects in case that the progressive plotting is selected
...
- some fixes in Gerber isolation in case that the progressive plotting is selected; added a 'Buffer solid geometry' button shown only when progressive plotting for Gerber object is selected. It will buffer the entire geometry of the object and plot it, in a threaded way.
2019-09-09 14:32:30 +03:00
f38dab80e3
- added for NCC Tool and Paint Tool a setting in the Preferences -> Tools --> (NCC Tool/ Paint Tool) that can set a progressive plotting (plot shapes as they are processed)
2019-09-09 05:14:44 +03:00
198e055328
- added a setting in Preferences -> Gerber -> Gerber General named Buffering. If set to 'no' the Gerber objects load a lot more faster (perhaps 10 times faster than when set to 'full') but the visual look is not so great as all the aperture polygons can be seen
2019-09-09 02:41:14 +03:00
28a86aa661
- updated German language translation files
...
- separated the Plotting thread from the transformations threads
2019-09-07 23:16:20 +03:00
97024ed643
- corrected some issues and made Move Tool to show correctly when it is moving and when it is offsetting the objects position
2019-09-07 18:41:48 +03:00
4cbb5846e3
- all transformation functions show now the progress (rotate, mirror, scale, offset, skew)
...
- made threaded the Offset and Scale operations found in the Selected tab of the object
2019-09-07 17:08:25 +03:00
5d854a6f1b
- added a method to gracefully exit from threaded tasks and implemented it for the NCC Tool and for the Paint Tool
...
- modified the on_about() function to reflect the reality in 2019 - FlatCAM it is an Open Source contributed software
2019-09-07 09:16:32 +03:00
e2b9de743f
- small change
2019-09-06 23:09:21 +03:00
24e29bda55
- more customization for the progress display in case of NCC Tool, Paint Tool and for the Gcode generation
2019-09-06 22:25:38 +03:00
88b04f9e7a
- modified all the FlatCAM tools strings to the new format in which the status is no longer included in the translated strings to make it easier for the future translations
...
- updated POT file with the new strings
2019-09-06 21:02:08 +03:00
c1ce72e9fb
- some fixes and prepared the activity monitor area to receive updated texts
2019-09-06 15:20:19 +03:00
9f0b5d92db
- added percentage display for work done in NCC Tool
2019-09-06 10:37:59 +03:00
c1e079474d
- small changes
2019-09-06 00:40:07 +03:00
76138986bf
- fixed issue with loading files at start-up
...
- fixed issue with generating bounding box geometry for CNCJob objects
- added some more infobar messages and log.debug
- increased the priority for the worker tasks
2019-09-05 17:38:45 +03:00
d909b98130
- fixed bug in camblib.clear_polygon3() which caused that some copper clearing / paintings were not complete (some polygons were not processed) when the Straight Lines method was used
...
- some changes in NCC Tools regarding of the clearing itself
2019-09-03 23:15:29 +03:00
241cac8556
- finished the work on file extensions registration with FlatCAM. If the file extensions are deleted in the Preferences -> File Associations then those extensions are unregistered with FlatCAM
...
- fixed bug in NCC Tools and in SolderPaste Tool if in Edit -> Preferences only one tool is entered
2019-09-03 22:46:18 +03:00
e8aba2cdb7
- in Paint Tool and NCC Tool fixed the RMB click detection when Area selection is used
2019-09-03 16:11:21 +03:00
c0cab6ee23
- in NCC Tool added a warning in case there are isolation tools and if those isolation's are interrupted by an area or a box
...
- in Paint Tool made that the area selection is repeated until RMB click
2019-09-03 15:52:28 +03:00
50aacf21c2
- in NCC Tool now the Area adding is continuous until RMB is clicked (no key modifier is needed anymore)
2019-09-03 02:17:31 +03:00
a1d874b705
- fixed the isolation distance in NCC Tool for the tools with iso_op type
2019-09-03 01:47:32 +03:00
4dbf6b2fa9
- small changes in NCC tool regarding the usage of the V-shape tool
2019-09-03 01:32:10 +03:00
7ff8d893c0
- in NCC tool there is now a depth of cut parameter named 'Cut Z' which will dictate how deep the tool will enter into the PCB material
...
- in NCC tool added possibility to choose between the type of tools to be used and when V-shape is used then the tool diameter is calculated from the desired depth of cut and from the V-tip parameters
2019-09-03 01:13:03 +03:00
707a22c7a3
- in Properties Tool fixed the dimensions calculations (length, width, area) to work for multi-geo objects
2019-09-02 22:36:20 +03:00
60512f09a7
- in Properties Tool made threaded the calculation of convex_hull area and to work for multi-geo objects
...
- in NCC tool the type of tool that is used is transferred to the Geometry object
- in NCC tool the type of isolation done with the tools selected as isolation tools can now be selected and it has also an Edit -> Preferences entry
2019-09-02 21:39:46 +03:00
4b7115ca59
- added formatting for some strings in the app strings, making the future translations easier
2019-09-02 13:24:04 +03:00
7827cbfe6c
- fixed issue in NCC Tool when using area option
2019-09-02 00:53:02 +03:00
1e6eebefed
- added isolation capability in NCC tool for the rest-machining option
2019-09-02 00:43:34 +03:00
1295a94af1
- fixed open handlers
...
- fixed issue in NCC Tool where the tool table context menu could be installed multiple times
- added new ability to create simple isolation's in the NCC Tool
2019-09-02 00:14:28 +03:00
ba1e0bc94b
- fixed Tcl Command CncJob
...
- fixed crash due of Properties Tool trying to have a convex hull area on FlatCAMCNCJob objects which is not possible due of their nature
- modified Tcl Command SubtractRectangle
- fixed and modernized the Tcl Command Scale to be able to scale on X axis or on Y axis or on both and having as scale reference either the (0, 0) point or the minimum point of the bounding box or the center of the bounding box.
- fixed and modernized the Tcl Command Skew
2019-08-26 00:40:35 +03:00
61df272bbc
- added new capability in NCC Tool when the reference object is of Gerber type and fixed some newly introduced errors
2019-08-25 18:13:13 +03:00
354946025c
- finished adding the TclCommandCopperClear that can be called with alias: 'ncc'
2019-08-25 16:05:03 +03:00
8c0b8ed13d
- initial add of a new Tcl COmmand named CopperClear
...
- remade the NCC Tool in preparation for the newly added TclCommand CopperClear
2019-08-25 04:45:16 +03:00
87d1558977
- modified the Paint Tool. Now the Single Polygon and Area/Reference Object painting works with multiple tools too. The tools have to be selected in the Tool Table.
...
- remade the TclCommand Paint to work in the new configuration of the the app (the painting functions are now in their own tool, Paint Tool)
- fixed a bug in the Properties Tool
2019-08-24 19:55:03 +03:00
82b39d64d2
- fixed selection by dragging a selection shape in Geometry Editor
2019-08-24 05:08:27 +03:00
0e96be7d9a
- made PlotCanvas class inherit from VisPy Canvas instead of creating an instance of it (work of JP)
2019-08-24 04:45:25 +03:00
3fe31dec59
- modified CutOut Tool so now the manual gaps adding will continue until the user is clicking the RMB
...
- added ability to turn on/of the grid snapping and to jump to a location while in CutOut Tool manual gap adding action
2019-08-24 04:30:27 +03:00
e35cf7f02c
- fixed the issue with GUI entries content being deselected on right click in the box in order to copy the value
2019-08-23 21:01:23 +03:00
beda0df4a4
- for all the tools launched rom toolbar the behavior is modified: first click it will launch the tool; second click: if the Tool tab has focus it will close the tool but if another tab is selected, the tool will have focus
...
- modified the NCC Tool and Paint Tool to work multiple times after first launch
2019-08-23 19:30:33 +03:00
23f85b71e9
- in Paint Tool added ability to add multiple zones to paint when Area option is checked and the modifier key is pressed (either CTRL or SHIFT as set in Preferences). Right click of the mouse is an additional way to finish the job.
...
- in Paint Tool and NCC Tool, for the Area option, now mouse panning is allowed while adding areas to process
2019-08-23 16:44:41 +03:00
2fbb480f86
- in NCC Tool added ability to add multiple zones to clear when Area option is checked and the modifier key is pressed (either CTRL or SHIFT as set in Preferences). Right click of the mouse is an additional way to finish the job.
...
- fixed a bug in Excellon Editor that made that the selection of drills is always cumulative
2019-08-23 15:22:53 +03:00
f087c242f3
- in Tool Cutout tool I've added the possibility to create a cutout without bridge gaps; added the 'None' option in the Gaps combobox
2019-08-23 02:38:42 +03:00
211a7e4f6f
- in Tool Cutout for the manual gaps, right mouse button click will exit from the action of adding gaps
2019-08-23 02:25:25 +03:00
948c495447
- in Tool Cutout for the manual gaps, now the moving geometry that cuts gaps will orient itself to fit the angle of the cutout geometry
2019-08-23 02:15:45 +03:00
Marius Stanciu