- removed "added ability to regenerate objects (it's actually deletion followed by recreation)" because of the way Python pass parameters to functions by reference instead of copy
- made the GCode Editor for ToolSolderPaste clear the text before updating the Code Editor tab
- all the Tabs in Plot Area are closed (except Plot Area itself) on New Project creation
- changed the shortcut key for YouTube channel from F2 to key F4
- changed the way APP LEVEL is showed both in Edit -> Preferences -> General tab and in each Selected Tab. Changed the ToolTips content for this.
- added the functions for GCode View and GCode Save in Tool SolderPaste
- New feature: added the capability to view the source code of the Gerber/Excellon file that was loaded into the app. The file is also stored as an object attribute for later use. THe view option is in the project context menu and in Menu -> Options -> View Source
- added a new entry in the Project Context Menu named 'Save'. It will actually work for Geometry and it will do Export DXF and for Excellon and it will do Export Excellon
- added new options in Edit -> Preferences -> General -> App Preferences to control if the Notebook is showed at startup and if the notebook is closed when there are no objects in the collection and showed when the collection has objects.
- finished the solid_geometry restore after edit in Excellon Editor
- finished plotting selection for each tool in the Excellon Tool Table
- fixed the camlib.Excellon.bounds() function for the new type of Excellon geometry therefore fixed the canvas selection, too
- fixed a bug where in Excellon editor when editing a file, a tool was automatically added. That is supposed to happen only for empty newly created Excellon Objects.
- in Excellon Editor added a shortcut key 'T' that popup a window allowing to enter a new Tool with the set diameter
- in App added a shortcut key 'T' that popup a windows allowing to enter a new Tool with set diameter only when the Selected tab is on focus and only if a Geometry object is selected
- changed the shortcut key for Transform Tool from 'T' to 'ALT+T'
- fixed bug in Geometry Selected tab that generated error when used tool offset was less than half of either total length or half of total width. Now the app signal the issue with a status bar message
- added Double Validator for the Offset value so only float numbers can be entered.
- in App added a shortcut key 'T' that popup a windows allowing to enter a new Tool with set diameter only when the Tool tab is on focus and only if a NCC Tool or Paint Area Tool object is installed in the Tool Tab
- fixed FlatCAM crash when trying to make drills GCode out of a file that have only slots.
- made the shell toggle shortcut key work when focused on Selected Tab; toggle units shortcut also
- changed the messages for Units COnversion
- fixed bug in multigeometry geometry not having the bounds in self.options and crashing the GCode generation
- fixed bug that crashed whole application in case that the GCode editor is activated on a Tool gcode that is defective.
- fixed bug in Marlin postprocessor for the Excellon files; the header and toolchange event always used the parenthesis witch is not compatible with GCode for Marlin
- fixed a issue with a move to Z_move before any toolchange
- now the special messages in the Shell are color coded according to the level. Before they all were RED. Now the WARNINGS are yellow, ERRORS are red and SUCCESS is a dark green. Also the level is in CAPS LOCK to make them more obvious
- some more changes to GUI interface (solved issues)
- added some status bar messages in the Geometry Editor to guide the user when using the Geometry Tools
- now the '`' shortcut key that shows the 'shortcut key list' in Editors points to the same window which is created in a tab no longer as a pop-up window. This tab can be detached if needed.
- fixed gcode conversion/scale (on units change) when multiple values are found on each line
- replaced the pop-up window for the shortcut list with a new detachable tab
- removed the pop-up messages from the rotate, skew, flip commands
- more fixes in camlib.CNCJob regarding usage of toolchange (in case it is None)
- fixed postprocessor files to work with toolchange_xy parameter value = None (no values in Edit - Preferences fields)
- in case that the Toolchange X,Y parameter in Selected (or in Preferences) are deleted then the app will still do the job using the current coordinates for toolchange
- fixed an issue in camlib.CNCJob where tha variable self.toolchange_xy was used for 2 different purposes which created loss of information.
Marius Stanciu