115e882614
- in CNCJob UI Autolevelling - finished the Import Height Map method
2020-08-17 02:09:44 +03:00
3ef47da370
- in CNCJob UI Autolevelling - Added entries in Preferences
2020-08-17 00:40:45 +03:00
e0ec8ac44f
- in CNCJob UI Autolevelling - Probing GCode has now a header
2020-08-16 23:49:53 +03:00
fd895e3c21
- in CNCJob UI Autolevelling - updated the UI with controls for probing GCode parameters and added signals and slots for the UI
...
- in CNCJob UI Autolevelling - added a mini gcode sender for the GRBL to be able to send the probing GCode and get the height map (I may make a small and light app for that so it does not need to have FlatCAM on the GCode sender PC)
- in CNCJob UI Autolevelling finished the probing GCode generation for MACH/LinuxCNC controllers; this GCode can also be viewed
2020-08-16 23:05:31 +03:00
cc7c525be1
- in CNCJob UI finished working on adding test points in Manual mode
2020-08-14 17:04:16 +03:00
5af8918441
- in CNCJob UI worked on the UI for the Autolevelling
...
- in CNCJob UI finished working on adding test points in Grid mode
2020-08-14 12:46:27 +03:00
298976f32e
- CNCJob object - working in generating Voronoi diagram for autolevelling
2020-08-14 02:03:03 +03:00
776034d1b1
- Tool Cutout - some work in gaps thickness control for the free form cutout
2020-08-13 22:38:39 +03:00
daf66ae58c
- in CNCJob UI updated the GUI for Autolevelling
2020-08-13 17:32:54 +03:00
fff0d6efc1
- in CNCJob UI added GUI for an eventual Autolevelling feature
2020-08-13 15:13:07 +03:00
6af295358d
- Tool Cutout - some work in gaps thickness control for the free form cutout
2020-08-12 00:11:39 +03:00
b9faa7b2b8
- small fix so the cx_freeze 6.2 module will work in building a frozen version of FlatCAM
2020-08-09 04:57:29 +03:00
9b6c65cdcb
- all Geometry objects resulted from Isolation Tool are now of type multi-geo
...
- fixed minor glitch in the Isolation Tool UI
- added an extra check when doing selection on canvas
- fixed an UI problem in Gerber Editor
2020-08-07 13:55:32 +03:00
06bb17f255
- Tool Cutout - some work in gaps thickness control for the free form cutout
2020-08-06 00:07:56 +03:00
14a9710a43
- Tool Cutout - done handling the gaps thickness control for the rectangular cutout; TODO: check all app for the usage of geometry_spindledir and geometry_optimization_type defaults in tools and in options
2020-08-05 17:37:24 +03:00
b5f77eac1b
- Tool Cutout - more work in gaps thickness control feature
...
- Tool Cutout - added some icons to buttons
2020-08-05 11:46:56 +03:00
f86193a5c0
- Tool Cutout - working in adding gaps suppression feature; added the UI in the Tool
2020-08-04 17:57:28 +03:00
e4852292b7
- removed the Toolchange Macro feature (in the future it will be replaced by full preprocessor customization)
...
- modified GUI in Preferences
2020-08-04 13:33:58 +03:00
eb28d28ea2
- GCode Editor - modified the UI
2020-08-03 23:20:41 +03:00
b7630f1334
- added a way to remember the old state of Tools toolbar before and after entering an Editor
2020-08-03 22:11:17 +03:00
ffda89f949
- GCode Editor - can not delete objects while in the Editor; can not close the Code Editor Tab except on Editor exit; activated the shortcut keys (for now only CTRL+S is working)
2020-08-03 22:01:42 +03:00
7d47a133f6
- GCode Editor - GCode tool selection when clicking on tool in Tools table is working. The only issue is that the first tool gcode includes the start gcode which confuse the algorithm
2020-08-03 17:01:52 +03:00
f557eeb98d
- GCode Editor - working on GCode tool selection - not OK
2020-08-02 22:25:48 +03:00
44411cdc82
- GCode Editor - closing the Editor will close also the Code Editor Tab
...
- cleanup of the CNCJob UI; added a checkbox to signal if any append/prepend gcode was set in Preferences (unchecking it will override and disable the usage of the append/prepend GCode)
- the start Gcode is now stored in the CNCJob object attribute gc_start
- GCode Editor - finished adding the ability to select a row in the Tools table and select the related GCode
2020-08-02 16:27:30 +03:00
840db915f1
- GCode Editor - work in the UI
2020-08-02 02:31:06 +03:00
a66d8a7438
- Tools Database: added a Cutout Tool Parameters section
2020-08-01 22:34:13 +03:00
1fc70fd3cf
- minor work in GCode Editor
2020-07-31 14:08:53 +03:00
593e6a80e5
- fixed an exception that was raised in Geometry object when using an Offset
2020-07-29 17:18:02 +03:00
445b4300f5
- Gerber parser - a single move with pen up D2 followed by a pen down D1 at the same location is now treated as a Flash; fixed issue #441
2020-07-27 03:25:38 +03:00
a24b09d8ad
- Tools Tab is hidden when entering into a Editor and showed on exit (this needs to be remade such that the toolbars state should be restored to whatever it was before entering in the Editor) - changed the ChangeLog
2020-07-25 12:43:11 +03:00
64529c4cfd
- wip
2020-07-25 12:42:27 +03:00
e7e1d959fd
Merge remote-tracking branch 'origin/Beta_8.994' into Beta_8.994
...
# Conflicts:
# CHANGELOG.md
2020-07-25 12:41:23 +03:00
8354bce680
- Tools Tab is hidden when entering into a Editor and showed on exit (this needs to be remade such that the toolbars state should be restored to whatever it was before entering in the Editor)
2020-07-25 12:39:39 +03:00
5142b51590
- in import SVG and import DXF methods made sure that any polygons that are imported as polygons will survive and only the lines are optimized (changed the behavior of the above made modification)
2020-07-23 01:01:40 +03:00
b8fb64a143
- added a Laser preprocessor named 'Z_laser' which will change the Z to the Travel Z on each ToolChange event allowing therefore control of the dot size
...
- by default now a new blank Geometry object created by FlatCAM is of type multigeo
- made sure that optimizations of lines when importing SVG or DXF as lines will not encounter polygons but only LinesStrings or LinearRings, otherwise having crashes
- fixed the import SVG and import DXF, when importing as Geometry to be imported as multigeo tool
- fixed the import SVG and import DXF, the source files will be saved as loaded into the source_file attribute of the resulting object (be it Geometry or Gerber)
2020-07-23 00:44:33 +03:00
cf78211a6f
- wip in the GCode Editor
2020-07-22 17:08:40 +03:00
9e8ab610b4
- working on a proper GCode Editor
2020-07-22 15:49:52 +03:00
65d4f70b21
- made sure there are no issues when plotting the Excellon object in one thread and trying to build the UI in another by using a signal
2020-07-21 15:58:22 +03:00
786423eb57
- fixed some issues in Excellon Editor due of recent changes
...
- moved the Gerber colors fill in the AppObject.on_object_created() slot and fixed some minor issues here
2020-07-21 15:52:53 +03:00
8a95580f15
- fixed issues with detecting older Preferences files
2020-07-21 14:17:58 +03:00
676645d6f5
- made sure that the Preferences files are deleted on new version install, while the application is in Beta status
2020-07-21 13:07:47 +03:00
687efd1fc0
- Excellon UI: made sure that when the Multicolor checkbox is unchecked, the color is updated in the Color column of the tools table
2020-07-21 07:20:14 +03:00
617b483267
- Excellon UI: added a column which will color each row/tool of that column in the color used when checking Multicolor checkbox
2020-07-21 06:49:49 +03:00
e147ef1994
- Excellon UI: fixed plot checkbox performing an extra plot function which was not required
2020-07-21 06:12:44 +03:00
51290a6b8b
- Excellon UI in Legacy Mode (2D): fixed the Solid checkbox functionality
2020-07-21 06:08:48 +03:00
e57820f707
- fixed MultiColor checkbox in Excellon Object to work in Legacy Mode (2D)
...
- modified the visibility change in Excellon UI to no longer do plot() when doing visibility toggle for one of the tools but only a visibility change in the shapes properties
2020-07-21 06:01:04 +03:00
e99dd967fe
- updated the FCRadio class with a method that allow disabling certain options
...
- the Path optimization options for Excellon and Geometry objects are now available depending on the OS platform used (32bit vs 64bit)
2020-07-21 00:57:26 +03:00
a3e1570747
- added a control in Preferences -> Gerber Tab for Gerber colors storage usage
...
- made sure that the defaults on first install will set the number of workers to half the number of CPU's on the system but no less than 2
2020-07-21 00:04:18 +03:00
ebdb2b3ca0
- fixed a bug in the FlatCAMGerber.on_mark_cb_click_table() method when moving a Gerber object
...
- added a way to remember the colors set for the Gerber objects; it will remember the order that they were loaded and set a color previously given
2020-07-20 19:21:17 +03:00
8409c74e23
- added some icons in the Code Editor
...
- replaced some icons in the app
- in Code Editor, when changing text, the Save Code button will change color (text and icon) to red and after save it will revert the color to the default one
- in Code Editor some methods rework
2020-07-18 00:26:03 +03:00
Marius Stanciu