diff --git a/CHANGELOG.md b/CHANGELOG.md
index cacd9bbd..570c6881 100644
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -15,6 +15,7 @@ CHANGELOG for FlatCAM beta
- In Excellon Object UI fixed the milling geometry generation
- updated the translations strings to the changes in the source code
- some strings changed
+- made the Properties checkbox in the Object UI into a checkable button and added to it an icon
20.10.2020
diff --git a/appGUI/ObjectUI.py b/appGUI/ObjectUI.py
index 43c4cbf9..1264f02c 100644
--- a/appGUI/ObjectUI.py
+++ b/appGUI/ObjectUI.py
@@ -252,12 +252,16 @@ class GerberObjectUI(ObjectUI):
grid0.addWidget(self.editor_button, 4, 0, 1, 3)
# PROPERTIES CB
- self.properties_lbl = FCLabel('%s:' % _("PROPERTIES"))
- self.properties_lbl.setToolTip(_("Show the Properties."))
- self.properties_cb = FCCheckBox()
-
- grid0.addWidget(self.properties_lbl, 6, 0)
- grid0.addWidget(self.properties_cb, 6, 1, 1, 2)
+ self.properties_button = FCButton('%s' % _("PROPERTIES"), checkable=True)
+ self.properties_button.setIcon(QtGui.QIcon(self.app.resource_location + '/properties32.png'))
+ self.properties_button.setToolTip(_("Show the Properties."))
+ self.properties_button.setStyleSheet("""
+ QPushButton
+ {
+ font-weight: bold;
+ }
+ """)
+ grid0.addWidget(self.properties_button, 6, 0, 1, 3)
# PROPERTIES Frame
self.properties_frame = QtWidgets.QFrame()
@@ -561,12 +565,16 @@ class ExcellonObjectUI(ObjectUI):
grid0.addWidget(self.editor_button, 4, 0, 1, 3)
# PROPERTIES CB
- self.properties_lbl = FCLabel('%s:' % _("PROPERTIES"))
- self.properties_lbl.setToolTip(_("Show the Properties."))
- self.properties_cb = FCCheckBox()
-
- grid0.addWidget(self.properties_lbl, 6, 0)
- grid0.addWidget(self.properties_cb, 6, 1, 1, 2)
+ self.properties_button = FCButton('%s' % _("PROPERTIES"), checkable=True)
+ self.properties_button.setIcon(QtGui.QIcon(self.app.resource_location + '/properties32.png'))
+ self.properties_button.setToolTip(_("Show the Properties."))
+ self.properties_button.setStyleSheet("""
+ QPushButton
+ {
+ font-weight: bold;
+ }
+ """)
+ grid0.addWidget(self.properties_button, 6, 0, 1, 3)
# PROPERTIES Frame
self.properties_frame = QtWidgets.QFrame()
@@ -861,12 +869,16 @@ class GeometryObjectUI(ObjectUI):
grid_header.addWidget(self.editor_button, 4, 0, 1, 3)
# PROPERTIES CB
- self.properties_lbl = FCLabel('%s:' % _("PROPERTIES"))
- self.properties_lbl.setToolTip(_("Show the Properties."))
- self.properties_cb = FCCheckBox()
-
- grid_header.addWidget(self.properties_lbl, 6, 0)
- grid_header.addWidget(self.properties_cb, 6, 1, 1, 2)
+ self.properties_button = FCButton('%s' % _("PROPERTIES"), checkable=True)
+ self.properties_button.setIcon(QtGui.QIcon(self.app.resource_location + '/properties32.png'))
+ self.properties_button.setToolTip(_("Show the Properties."))
+ self.properties_button.setStyleSheet("""
+ QPushButton
+ {
+ font-weight: bold;
+ }
+ """)
+ grid_header.addWidget(self.properties_button, 6, 0, 1, 3)
# PROPERTIES Frame
self.properties_frame = QtWidgets.QFrame()
@@ -1827,12 +1839,16 @@ class CNCObjectUI(ObjectUI):
f_lay.addWidget(self.editor_button, 4, 0, 1, 3)
# PROPERTIES CB
- self.properties_lbl = FCLabel('%s:' % _("PROPERTIES"))
- self.properties_lbl.setToolTip(_("Show the Properties."))
- self.properties_cb = FCCheckBox()
-
- f_lay.addWidget(self.properties_lbl, 6, 0)
- f_lay.addWidget(self.properties_cb, 6, 1, 1, 2)
+ self.properties_button = FCButton('%s' % _("PROPERTIES"), checkable=True)
+ self.properties_button.setIcon(QtGui.QIcon(self.app.resource_location + '/properties32.png'))
+ self.properties_button.setToolTip(_("Show the Properties."))
+ self.properties_button.setStyleSheet("""
+ QPushButton
+ {
+ font-weight: bold;
+ }
+ """)
+ f_lay.addWidget(self.properties_button, 6, 0, 1, 3)
# PROPERTIES Frame
self.properties_frame = QtWidgets.QFrame()
diff --git a/appObjects/FlatCAMCNCJob.py b/appObjects/FlatCAMCNCJob.py
index e9389a9f..dc53a729 100644
--- a/appObjects/FlatCAMCNCJob.py
+++ b/appObjects/FlatCAMCNCJob.py
@@ -579,7 +579,7 @@ class CNCJobObject(FlatCAMObj, CNCjob):
self.ui.editor_button.clicked.connect(lambda: self.app.object2editor())
# Properties
- self.ui.properties_cb.stateChanged.connect(self.on_properties)
+ self.ui.properties_button.toggled.connect(self.on_properties)
self.calculations_finished.connect(self.update_area_chull)
# autolevelling signals
diff --git a/appObjects/FlatCAMExcellon.py b/appObjects/FlatCAMExcellon.py
index 3c4d9186..44fcd5d5 100644
--- a/appObjects/FlatCAMExcellon.py
+++ b/appObjects/FlatCAMExcellon.py
@@ -178,7 +178,7 @@ class ExcellonObject(FlatCAMObj, Excellon):
self.ui.editor_button.clicked.connect(lambda: self.app.object2editor())
# Properties
- self.ui.properties_cb.stateChanged.connect(self.on_properties)
+ self.ui.properties_button.toggled.connect(self.on_properties)
self.calculations_finished.connect(self.update_area_chull)
self.ui.drill_button.clicked.connect(lambda: self.app.drilling_tool.run(toggle=True))
diff --git a/appObjects/FlatCAMGeometry.py b/appObjects/FlatCAMGeometry.py
index 2c44fdb3..2c9cf6db 100644
--- a/appObjects/FlatCAMGeometry.py
+++ b/appObjects/FlatCAMGeometry.py
@@ -598,7 +598,7 @@ class GeometryObject(FlatCAMObj, Geometry):
self.ui.editor_button.clicked.connect(self.app.object2editor)
# Properties
- self.ui.properties_cb.stateChanged.connect(self.on_properties)
+ self.ui.properties_button.toggled.connect(self.on_properties)
self.calculations_finished.connect(self.update_area_chull)
self.ui.generate_cnc_button.clicked.connect(self.on_generatecnc_button_click)
diff --git a/appObjects/FlatCAMGerber.py b/appObjects/FlatCAMGerber.py
index 07eb52e5..4286391d 100644
--- a/appObjects/FlatCAMGerber.py
+++ b/appObjects/FlatCAMGerber.py
@@ -151,7 +151,7 @@ class GerberObject(FlatCAMObj, Gerber):
self.ui.editor_button.clicked.connect(lambda: self.app.object2editor())
# Properties
- self.ui.properties_cb.stateChanged.connect(self.on_properties)
+ self.ui.properties_button.toggled.connect(self.on_properties)
self.calculations_finished.connect(self.update_area_chull)
# Tools
diff --git a/locale/tr/LC_MESSAGES/strings.mo b/locale/tr/LC_MESSAGES/strings.mo
index a05be0ab..b21a417e 100644
Binary files a/locale/tr/LC_MESSAGES/strings.mo and b/locale/tr/LC_MESSAGES/strings.mo differ
diff --git a/locale/tr/LC_MESSAGES/strings.po b/locale/tr/LC_MESSAGES/strings.po
index 2c16d44d..e9232746 100644
--- a/locale/tr/LC_MESSAGES/strings.po
+++ b/locale/tr/LC_MESSAGES/strings.po
@@ -5,8 +5,8 @@
msgid ""
msgstr ""
"Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-21 11:56+0300\n"
-"PO-Revision-Date: 2020-10-21 11:56+0300\n"
+"POT-Creation-Date: 2020-10-21 12:15+0300\n"
+"PO-Revision-Date: 2020-10-21 12:15+0300\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: tr_TR\n"
@@ -280,7 +280,7 @@ msgid "Tool Name"
msgstr "Uç Adı"
#: appDatabase.py:161 appDatabase.py:837 appEditors/AppExcEditor.py:3765
-#: appGUI/ObjectUI.py:1026 appGUI/ObjectUI.py:1594
+#: appGUI/ObjectUI.py:1038 appGUI/ObjectUI.py:1606
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:132
#: appTools/ToolCutOut.py:2058 appTools/ToolIsolation.py:3091
#: appTools/ToolNCC.py:3859 appTools/ToolNCC.py:3870 appTools/ToolPaint.py:2882
@@ -288,7 +288,7 @@ msgid "Tool Dia"
msgstr "Uç Kalınlığı"
#: appDatabase.py:162 appDatabase.py:839 appDatabase.py:1273
-#: appGUI/ObjectUI.py:1001
+#: appGUI/ObjectUI.py:1013
msgid "Tool Offset"
msgstr "Uç Hizası"
@@ -309,8 +309,8 @@ msgid "Tool Shape"
msgstr "Uç Şekli"
#: appDatabase.py:166 appDatabase.py:848 appDatabase.py:1309
-#: appDatabase.py:1834 appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:1157
-#: appGUI/ObjectUI.py:1946
+#: appDatabase.py:1834 appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:1169
+#: appGUI/ObjectUI.py:1962
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:58
@@ -343,7 +343,7 @@ msgid "V-Angle"
msgstr "V-Uç Açısı"
#: appDatabase.py:171 appDatabase.py:858 appDatabase.py:1350
-#: appDatabase.py:1903 appGUI/ObjectUI.py:1204
+#: appDatabase.py:1903 appGUI/ObjectUI.py:1216
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:198
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:102
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:61
@@ -372,7 +372,7 @@ msgid "Spindle Speed"
msgstr "Dönüş Hızı"
#: appDatabase.py:176 appDatabase.py:868 appDatabase.py:1467
-#: appDatabase.py:1984 appGUI/ObjectUI.py:1311 appTools/ToolDrilling.py:2264
+#: appDatabase.py:1984 appGUI/ObjectUI.py:1323 appTools/ToolDrilling.py:2264
#: appTools/ToolMilling.py:1957
msgid "Dwell"
msgstr "Bekle"
@@ -382,7 +382,7 @@ msgstr "Bekle"
msgid "Dwelltime"
msgstr "Bekleme Süresi"
-#: appDatabase.py:178 appDatabase.py:872 appGUI/ObjectUI.py:1470
+#: appDatabase.py:178 appDatabase.py:872 appGUI/ObjectUI.py:1482
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:221
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:237
@@ -804,14 +804,14 @@ msgid "Cutout Parameters"
msgstr "PCB Kesim Seçenekleri"
#: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
-#: appGUI/ObjectUI.py:540 appGUI/ObjectUI.py:842 appGUI/ObjectUI.py:1807
-#: appGUI/ObjectUI.py:2608 appGUI/ObjectUI.py:2675
+#: appGUI/ObjectUI.py:544 appGUI/ObjectUI.py:850 appGUI/ObjectUI.py:1819
+#: appGUI/ObjectUI.py:2624 appGUI/ObjectUI.py:2691
#: appTools/ToolCalibration.py:929 appTools/ToolFiducials.py:681
msgid "Name"
msgstr "İsim"
#: appDatabase.py:1137 appEditors/AppExcEditor.py:2567
-#: appEditors/AppExcEditor.py:3732 appGUI/ObjectUI.py:632
+#: appEditors/AppExcEditor.py:3732 appGUI/ObjectUI.py:640
#: appObjects/FlatCAMExcellon.py:900 appObjects/FlatCAMExcellon.py:1000
#: appObjects/FlatCAMObj.py:716 appObjects/FlatCAMObj.py:779
#: appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
@@ -913,7 +913,7 @@ msgstr "PCB Kesme"
msgid "Shape"
msgstr "Şekil"
-#: appDatabase.py:1403 appGUI/ObjectUI.py:1223
+#: appDatabase.py:1403 appGUI/ObjectUI.py:1235
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:186
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:148
#: appTools/ToolMilling.py:1860 appTools/ToolSolderPaste.py:1325
@@ -928,7 +928,7 @@ msgstr ""
"X-Y. İlerleme hızı.\n"
"Malzeme kesilirken kullanılan X-Y düzlemindeki hız."
-#: appDatabase.py:1417 appDatabase.py:1929 appGUI/ObjectUI.py:1237
+#: appDatabase.py:1417 appDatabase.py:1929 appGUI/ObjectUI.py:1249
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:201
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:171
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:161
@@ -1006,7 +1006,7 @@ msgid "Conventional"
msgstr "Geleneksel"
#: appDatabase.py:1542 appDatabase.py:1651 appDatabase.py:1753
-#: appDatabase.py:2027 appEditors/AppGeoEditor.py:450 appGUI/ObjectUI.py:1621
+#: appDatabase.py:2027 appEditors/AppGeoEditor.py:450 appGUI/ObjectUI.py:1633
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:250
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:167
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
@@ -1066,7 +1066,7 @@ msgid "Bounding box margin."
msgstr "Sınırlayıcı kutu boşluğu."
#: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1636 appGUI/ObjectUI.py:2099
+#: appGUI/ObjectUI.py:1648 appGUI/ObjectUI.py:2115
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
@@ -1091,7 +1091,7 @@ msgstr ""
"- Çizgi Bazlı: Paralel çizgiler."
#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
-#: appGUI/ObjectUI.py:1646 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
+#: appGUI/ObjectUI.py:1658 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: appTools/ToolNCC.py:1916 appTools/ToolNCC.py:4020 appTools/ToolPaint.py:1456
#: appTools/ToolPaint.py:3016 defaults.py:346
@@ -1102,7 +1102,7 @@ msgstr "Standart"
#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
#: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113
-#: appGUI/ObjectUI.py:1646 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
+#: appGUI/ObjectUI.py:1658 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: appTools/ToolNCC.py:1927 appTools/ToolNCC.py:4020 appTools/ToolPaint.py:1470
#: appTools/ToolPaint.py:3016 defaults.py:469 defaults.py:506
@@ -1112,7 +1112,7 @@ msgid "Seed"
msgstr "Nokta Bazlı"
#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
-#: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1646
+#: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1658
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217
#: appTools/ToolNCC.py:1938 appTools/ToolNCC.py:4020 appTools/ToolPaint.py:160
@@ -1129,8 +1129,8 @@ msgstr "Çizgi Bazlı"
msgid "Combo"
msgstr "Karma"
-#: appDatabase.py:1594 appDatabase.py:1712 appGUI/ObjectUI.py:2184
-#: appGUI/ObjectUI.py:2207 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
+#: appDatabase.py:1594 appDatabase.py:1712 appGUI/ObjectUI.py:2200
+#: appGUI/ObjectUI.py:2223 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224
#: appObjects/FlatCAMCNCJob.py:1291 appObjects/FlatCAMCNCJob.py:1313
#: appTools/ToolNCC.py:4041 appTools/ToolNCC.py:4144 appTools/ToolPaint.py:3027
@@ -1168,7 +1168,7 @@ msgstr ""
#: appDatabase.py:1614 appDatabase.py:1672 appEditors/AppGeoEditor.py:611
#: appEditors/AppGerberEditor.py:5321 appEditors/appGCodeEditor.py:692
-#: appGUI/ObjectUI.py:143 appGUI/ObjectUI.py:943 appGUI/ObjectUI.py:1936
+#: appGUI/ObjectUI.py:143 appGUI/ObjectUI.py:955 appGUI/ObjectUI.py:1952
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
#: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
@@ -1263,7 +1263,7 @@ msgstr ""
"Yalıtım aralığının uç genişliği\n"
"sayısı (tamsayı) cinsinden genişliği."
-#: appDatabase.py:1755 appGUI/ObjectUI.py:1623
+#: appDatabase.py:1755 appGUI/ObjectUI.py:1635
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:169
#: appTools/ToolIsolation.py:3191
msgid "How much (percentage) of the tool width to overlap each tool pass."
@@ -1356,7 +1356,7 @@ msgstr ""
"çıkış deliği çapını oluşturmak için daha derin delmesi gerekir.\n"
"Buradaki değer Z derinliği parametresini telafi edebilir."
-#: appDatabase.py:1874 appGUI/ObjectUI.py:1181
+#: appDatabase.py:1874 appGUI/ObjectUI.py:1193
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:82
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:80
@@ -1372,7 +1372,7 @@ msgstr ""
"için çoklu geçişler kullanın. Z derinliğine\n"
"ulaşana kadar birkaç kez kesilir."
-#: appDatabase.py:1896 appGUI/ObjectUI.py:1195
+#: appDatabase.py:1896 appGUI/ObjectUI.py:1207
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:94
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:92
#: appTools/ToolCutOut.py:2140 appTools/ToolDrilling.py:2180
@@ -1402,7 +1402,7 @@ msgstr ""
"Buna 'Daldırma' besleme hızı denir.\n"
"Doğrusal hareket G01 için kullanılır."
-#: appDatabase.py:1946 appGUI/ObjectUI.py:1252
+#: appDatabase.py:1946 appGUI/ObjectUI.py:1264
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:67
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:317
#: appTools/ToolDrilling.py:2227 appTools/ToolMilling.py:1892
@@ -1425,7 +1425,7 @@ msgstr ""
"Sadece Marlin için kullanışlıdır, \n"
"diğer durumlar için yoksayın."
-#: appDatabase.py:1969 appGUI/ObjectUI.py:1295
+#: appDatabase.py:1969 appGUI/ObjectUI.py:1307
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:217
#: appObjects/FlatCAMGeometry.py:1827 appTools/ToolDrilling.py:1310
#: appTools/ToolDrilling.py:2249 appTools/ToolMilling.py:1307
@@ -1924,7 +1924,7 @@ msgstr "Bitti. Delik(ler) silindi."
msgid "Click on the circular array Center position"
msgstr "Dairesel dizinin merkez konumunu tıklayın"
-#: appEditors/AppExcEditor.py:3705 appGUI/ObjectUI.py:549
+#: appEditors/AppExcEditor.py:3705 appGUI/ObjectUI.py:553
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:26
msgid "Excellon Editor"
msgstr "Excellon Düzenleyici"
@@ -1934,14 +1934,14 @@ msgstr "Excellon Düzenleyici"
msgid "Name:"
msgstr "İsim:"
-#: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:586
-#: appGUI/ObjectUI.py:911 appTools/ToolIsolation.py:3010
+#: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:594
+#: appGUI/ObjectUI.py:923 appTools/ToolIsolation.py:3010
#: appTools/ToolNCC.py:3766 appTools/ToolPaint.py:2800
#: appTools/ToolSolderPaste.py:1155
msgid "Tools Table"
msgstr "Araçlar Tablosu"
-#: appEditors/AppExcEditor.py:3720 appGUI/ObjectUI.py:588
+#: appEditors/AppExcEditor.py:3720 appGUI/ObjectUI.py:596
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
@@ -1969,7 +1969,7 @@ msgstr ""
"Bu Excellon nesnesinin Araçlar Listesine\n"
"bir araç ekleyin/silin."
-#: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1028
+#: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1040
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3861
msgid "Diameter for the new tool"
@@ -2320,7 +2320,7 @@ msgid "Round"
msgstr "Yuvarlak"
#: appEditors/AppGeoEditor.py:94 appEditors/AppGerberEditor.py:2639
-#: appGUI/ObjectUI.py:1558
+#: appGUI/ObjectUI.py:1570
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:225
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:68
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:175
@@ -2382,7 +2382,7 @@ msgid "Text Tool"
msgstr "Metin Aracı"
#: appEditors/AppGeoEditor.py:404 appGUI/MainGUI.py:511 appGUI/MainGUI.py:1245
-#: appGUI/ObjectUI.py:1116 appObjects/FlatCAMExcellon.py:878
+#: appGUI/ObjectUI.py:1128 appObjects/FlatCAMExcellon.py:878
#: appObjects/FlatCAMGeometry.py:950 appTools/ToolDrilling.py:711
#: appTools/ToolDrilling.py:1033 appTools/ToolDrilling.py:2116
#: appTools/ToolIsolation.py:697 appTools/ToolIsolation.py:3166
@@ -2422,7 +2422,7 @@ msgid "Contour:"
msgstr "Kenar:"
#: appEditors/AppGeoEditor.py:546 appGUI/MainGUI.py:935 appGUI/MainGUI.py:2090
-#: appGUI/ObjectUI.py:1711 appTools/ToolPaint.py:228 appTools/ToolPaint.py:2730
+#: appGUI/ObjectUI.py:1723 appTools/ToolPaint.py:228 appTools/ToolPaint.py:2730
msgid "Paint Tool"
msgstr "Çizim"
@@ -2558,7 +2558,7 @@ msgid "A point of reference in format X,Y."
msgstr "X,Y biçiminde referans noktası."
#: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2265
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2281
#: appTools/ToolDblSided.py:713 appTools/ToolDblSided.py:901
#: appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
#: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
@@ -2769,7 +2769,7 @@ msgid "Offset Y"
msgstr "Hizala"
#: appEditors/AppGeoEditor.py:920 appEditors/AppGerberEditor.py:5630
-#: appGUI/ObjectUI.py:432 appGUI/ObjectUI.py:469
+#: appGUI/ObjectUI.py:436 appGUI/ObjectUI.py:473
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:216
#: appTools/ToolQRCode.py:787 appTools/ToolTransform.py:854
@@ -2856,7 +2856,7 @@ msgstr ""
"bir tamponlama efekti oluşturur."
#: appEditors/AppGeoEditor.py:1043 appEditors/AppGerberEditor.py:5753
-#: appGUI/ObjectUI.py:1512 appGUI/preferences/tools/Tools2CalPrefGroupUI.py:48
+#: appGUI/ObjectUI.py:1524 appGUI/preferences/tools/Tools2CalPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70
#: appTools/ToolCalibration.py:881 appTools/ToolDrilling.py:2540
@@ -3253,14 +3253,14 @@ msgstr "Çizim şekli oluştur ..."
msgid "Shape transformations ..."
msgstr "Şekil dönüşümleri ..."
-#: appEditors/AppGeoEditor.py:3281 appGUI/ObjectUI.py:849
+#: appEditors/AppGeoEditor.py:3281 appGUI/ObjectUI.py:857
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27
msgid "Geometry Editor"
msgstr "Şekil Düzenleyici"
#: appEditors/AppGeoEditor.py:3287 appEditors/AppGerberEditor.py:2495
#: appEditors/AppGerberEditor.py:3968 appEditors/appGCodeEditor.py:692
-#: appGUI/ObjectUI.py:312 appGUI/ObjectUI.py:943 appGUI/ObjectUI.py:1936
+#: appGUI/ObjectUI.py:316 appGUI/ObjectUI.py:955 appGUI/ObjectUI.py:1952
#: appTools/ToolCutOut.py:2011 appTools/ToolDblSided.py:519
#: appTools/ToolTransform.py:579
msgid "Type"
@@ -3275,7 +3275,7 @@ msgid "Line"
msgstr "Çizgi"
#: appEditors/AppGeoEditor.py:3561 appGUI/MainGUI.py:1496
-#: appGUI/ObjectUI.py:1559
+#: appGUI/ObjectUI.py:1571
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:226
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:309
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
@@ -3523,22 +3523,22 @@ msgstr "Bitti. Şekillerin kopyalanması başarıyla tamamlandı."
msgid "Gerber Editor"
msgstr "Gerber Düzenleyici"
-#: appEditors/AppGerberEditor.py:2482 appGUI/ObjectUI.py:277
+#: appEditors/AppGerberEditor.py:2482 appGUI/ObjectUI.py:281
#: appObjects/FlatCAMObj.py:492 appTools/ToolProperties.py:162
msgid "Apertures"
msgstr "Şekiller"
-#: appEditors/AppGerberEditor.py:2484 appGUI/ObjectUI.py:279
+#: appEditors/AppGerberEditor.py:2484 appGUI/ObjectUI.py:283
msgid "Apertures Table for the Gerber Object."
msgstr "Gerber nesnesi için şekil tablosu."
#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:312
+#: appGUI/ObjectUI.py:316
msgid "Code"
msgstr "Kod"
#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:312
+#: appGUI/ObjectUI.py:316
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
@@ -3549,28 +3549,28 @@ msgid "Size"
msgstr "Boyut"
#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:312
+#: appGUI/ObjectUI.py:316
msgid "Dim"
msgstr "Genişlik"
-#: appEditors/AppGerberEditor.py:2500 appGUI/ObjectUI.py:316
+#: appEditors/AppGerberEditor.py:2500 appGUI/ObjectUI.py:320
msgid "Index"
msgstr "Dizin"
#: appEditors/AppGerberEditor.py:2502 appEditors/AppGerberEditor.py:2531
-#: appGUI/ObjectUI.py:318
+#: appGUI/ObjectUI.py:322
msgid "Aperture Code"
msgstr "Şekil Kodu"
-#: appEditors/AppGerberEditor.py:2504 appGUI/ObjectUI.py:320
+#: appEditors/AppGerberEditor.py:2504 appGUI/ObjectUI.py:324
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr "Şekil tipi: dairesel, dikdörtgen, makrolar vb"
-#: appEditors/AppGerberEditor.py:2506 appGUI/ObjectUI.py:322
+#: appEditors/AppGerberEditor.py:2506 appGUI/ObjectUI.py:326
msgid "Aperture Size:"
msgstr "Şekil Boyutu:"
-#: appEditors/AppGerberEditor.py:2508 appGUI/ObjectUI.py:324
+#: appEditors/AppGerberEditor.py:2508 appGUI/ObjectUI.py:328
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
@@ -3648,7 +3648,7 @@ msgstr "Şekil Tablosuna yeni bir şekil ekler."
#: appEditors/AppGerberEditor.py:2595 appEditors/AppGerberEditor.py:2743
#: appGUI/MainGUI.py:757 appGUI/MainGUI.py:1093 appGUI/MainGUI.py:1577
-#: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1076
+#: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1088
#: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
#: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69
#: appTools/ToolNCC.py:3917 appTools/ToolPaint.py:143
@@ -4004,7 +4004,7 @@ msgid "String to replace the one in the Find box throughout the text."
msgstr "Metin boyunca Bul kutusundaki ile değiştirilecek dize."
#: appEditors/AppTextEditor.py:101 appGUI/GUIElements.py:3508
-#: appGUI/ObjectUI.py:1795 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:61
+#: appGUI/ObjectUI.py:1807 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:295
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280
#: appTools/ToolIsolation.py:808 appTools/ToolIsolation.py:1433
@@ -4105,25 +4105,25 @@ msgstr "G Kod'u Başlat"
msgid "Loaded Machine Code into Code Editor"
msgstr "Kod düzenleyiciye makine kodu yüklendi"
-#: appEditors/appGCodeEditor.py:667 appGUI/ObjectUI.py:1815
+#: appEditors/appGCodeEditor.py:667 appGUI/ObjectUI.py:1827
msgid "GCode Editor"
msgstr "G Kod Düzenleyicisi"
#: appEditors/appGCodeEditor.py:692 appEditors/appGCodeEditor.py:703
-#: appGUI/ObjectUI.py:943 appGUI/ObjectUI.py:1936 appGUI/ObjectUI.py:1946
+#: appGUI/ObjectUI.py:955 appGUI/ObjectUI.py:1952 appGUI/ObjectUI.py:1962
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:138
#: appTools/ToolCopperThieving.py:1314
msgid "Dia"
msgstr "Boyut"
-#: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:943
-#: appGUI/ObjectUI.py:1936 appTools/ToolIsolation.py:3022
+#: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:955
+#: appGUI/ObjectUI.py:1952 appTools/ToolIsolation.py:3022
#: appTools/ToolNCC.py:3778 appTools/ToolPaint.py:2813
msgid "TT"
msgstr "TT"
-#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:632
-#: appGUI/ObjectUI.py:1946
+#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:640
+#: appGUI/ObjectUI.py:1962
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:71
#: appObjects/FlatCAMObj.py:499 appTools/ToolDrilling.py:2065
#: appTools/ToolMilling.py:1670 appTools/ToolMilling.py:1769
@@ -4131,8 +4131,8 @@ msgstr "TT"
msgid "Drills"
msgstr "Delikler"
-#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:632
-#: appGUI/ObjectUI.py:1946
+#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:640
+#: appGUI/ObjectUI.py:1962
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:158
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:72
#: appObjects/FlatCAMObj.py:501 appTools/ToolDrilling.py:2065
@@ -5010,7 +5010,7 @@ msgstr "Kodu Görüntüle"
#: appGUI/MainGUI.py:755 appGUI/MainGUI.py:874 appGUI/MainGUI.py:1091
#: appGUI/MainGUI.py:1575 appGUI/MainGUI.py:2032 appGUI/MainGUI.py:2245
-#: appGUI/MainGUI.py:4680 appGUI/ObjectUI.py:1069
+#: appGUI/MainGUI.py:4680 appGUI/ObjectUI.py:1081
#: appObjects/FlatCAMGeometry.py:557 appTools/ToolPanelize.py:325
#: appTools/ToolPanelize.py:351 appTools/ToolPanelize.py:448
#: appTools/ToolPanelize.py:477 appTools/ToolPanelize.py:538
@@ -5164,13 +5164,13 @@ msgstr "Nesne Hizalama"
msgid "Extract Drills Tool"
msgstr "Delik Çıkarma"
-#: appGUI/MainGUI.py:931 appGUI/ObjectUI.py:383 appTools/ToolCutOut.py:156
+#: appGUI/MainGUI.py:931 appGUI/ObjectUI.py:387 appTools/ToolCutOut.py:156
#: appTools/ToolCutOut.py:2050
msgid "Cutout Tool"
msgstr "PCB Kesimi"
-#: appGUI/MainGUI.py:933 appGUI/MainGUI.py:2088 appGUI/ObjectUI.py:368
-#: appGUI/ObjectUI.py:1730 appTools/ToolNCC.py:197
+#: appGUI/MainGUI.py:933 appGUI/MainGUI.py:2088 appGUI/ObjectUI.py:372
+#: appGUI/ObjectUI.py:1742 appTools/ToolNCC.py:197
msgid "NCC Tool"
msgstr "Bakır Temizleme"
@@ -5179,7 +5179,7 @@ msgstr "Bakır Temizleme"
msgid "Isolation Tool"
msgstr "Yalıtım"
-#: appGUI/MainGUI.py:939 appGUI/MainGUI.py:2094 appGUI/ObjectUI.py:687
+#: appGUI/MainGUI.py:939 appGUI/MainGUI.py:2094 appGUI/ObjectUI.py:695
#: appTools/ToolDrilling.py:245 appTools/ToolDrilling.py:1979
#: appTools/ToolMilling.py:169
msgid "Drilling Tool"
@@ -5504,8 +5504,8 @@ msgstr "ŞEKİL"
msgid "CNC-JOB"
msgstr "CNC-İŞ"
-#: appGUI/MainGUI.py:1353 appGUI/ObjectUI.py:349 appGUI/ObjectUI.py:683
-#: appGUI/ObjectUI.py:1704
+#: appGUI/MainGUI.py:1353 appGUI/ObjectUI.py:353 appGUI/ObjectUI.py:691
+#: appGUI/ObjectUI.py:1716
msgid "TOOLS"
msgstr "ARAÇLAR 1"
@@ -5574,7 +5574,7 @@ msgstr "Değişiklikleri kaydetmeden ayarlar penceresini kapatır."
msgid "Toggle Visibility"
msgstr "Görünürlüğü Değiştir"
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2257
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2273
msgid "New"
msgstr "Yeni"
@@ -5657,7 +5657,7 @@ msgstr "Kesişim"
msgid "Subtraction"
msgstr "Çıkarma"
-#: appGUI/MainGUI.py:1518 appGUI/ObjectUI.py:1797
+#: appGUI/MainGUI.py:1518 appGUI/ObjectUI.py:1809
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:63
msgid "Cut"
msgstr "Kesim"
@@ -6342,15 +6342,15 @@ msgstr "Belirlenen mesafe kadar bir hizalama yapılacaktır."
msgid "Gerber Object"
msgstr "Gerber Nesnesi"
-#: appGUI/ObjectUI.py:197 appGUI/ObjectUI.py:519 appGUI/ObjectUI.py:825
-#: appGUI/ObjectUI.py:1784 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:30
+#: appGUI/ObjectUI.py:197 appGUI/ObjectUI.py:523 appGUI/ObjectUI.py:833
+#: appGUI/ObjectUI.py:1796 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:30
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:33
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:31
msgid "Plot Options"
msgstr "Çizim Seçenekleri"
-#: appGUI/ObjectUI.py:202 appGUI/ObjectUI.py:522
+#: appGUI/ObjectUI.py:202 appGUI/ObjectUI.py:526
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:45
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:119
@@ -6362,26 +6362,26 @@ msgstr "Dolgulu"
msgid "Solid color polygons."
msgstr "Dolgulu çokgenler."
-#: appGUI/ObjectUI.py:209 appGUI/ObjectUI.py:528 appGUI/ObjectUI.py:831
+#: appGUI/ObjectUI.py:209 appGUI/ObjectUI.py:532 appGUI/ObjectUI.py:839
msgid "Multi-Color"
msgstr "Çok Renkli"
-#: appGUI/ObjectUI.py:211 appGUI/ObjectUI.py:530 appGUI/ObjectUI.py:833
+#: appGUI/ObjectUI.py:211 appGUI/ObjectUI.py:534 appGUI/ObjectUI.py:841
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:56
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:49
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:54
msgid "Draw polygons in different colors."
msgstr "Farklı renklerde renkli çokgenler."
-#: appGUI/ObjectUI.py:226 appGUI/ObjectUI.py:600
+#: appGUI/ObjectUI.py:226 appGUI/ObjectUI.py:608
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:40
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:40
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:38
msgid "Plot"
msgstr "Göster"
-#: appGUI/ObjectUI.py:227 appGUI/ObjectUI.py:602 appGUI/ObjectUI.py:932
-#: appGUI/ObjectUI.py:1925 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:41
+#: appGUI/ObjectUI.py:227 appGUI/ObjectUI.py:610 appGUI/ObjectUI.py:944
+#: appGUI/ObjectUI.py:1941 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:41
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:42
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:40
msgid "Plot (show) this object."
@@ -6391,29 +6391,29 @@ msgstr "Nesne üzerindeki çizimleri göster."
msgid "Edit an Gerber object."
msgstr "Gerber nesnesini düzenleyin."
-#: appGUI/ObjectUI.py:255 appGUI/ObjectUI.py:564 appGUI/ObjectUI.py:864
-#: appGUI/ObjectUI.py:1830
+#: appGUI/ObjectUI.py:255 appGUI/ObjectUI.py:568 appGUI/ObjectUI.py:872
+#: appGUI/ObjectUI.py:1842
msgid "PROPERTIES"
msgstr ""
-#: appGUI/ObjectUI.py:256 appGUI/ObjectUI.py:565 appGUI/ObjectUI.py:865
-#: appGUI/ObjectUI.py:1831
+#: appGUI/ObjectUI.py:257 appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:874
+#: appGUI/ObjectUI.py:1844
#, fuzzy
#| msgid "Properties"
msgid "Show the Properties."
msgstr "Özellikler"
-#: appGUI/ObjectUI.py:287 appGUI/ObjectUI.py:595
+#: appGUI/ObjectUI.py:291 appGUI/ObjectUI.py:603
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:50
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:54
msgid "Toggle the display of the Tools Table."
msgstr "Araçlar Tablosunun görünümünü değiştirin."
-#: appGUI/ObjectUI.py:296
+#: appGUI/ObjectUI.py:300
msgid "Mark All"
msgstr "Tümünü Seç"
-#: appGUI/ObjectUI.py:298
+#: appGUI/ObjectUI.py:302
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
@@ -6423,17 +6423,17 @@ msgstr ""
"İşaretlenmediğinde, çalışma alanı üzerine çizilen\n"
"tüm işaretli şekilleri silecektir."
-#: appGUI/ObjectUI.py:328
+#: appGUI/ObjectUI.py:332
msgid "Mark the aperture instances on canvas."
msgstr ""
"Çalışma alanı üzerindeki şekil örneklerini\n"
"işaretleyin."
-#: appGUI/ObjectUI.py:335 appTools/ToolIsolation.py:3465
+#: appGUI/ObjectUI.py:339 appTools/ToolIsolation.py:3465
msgid "Buffer Solid Geometry"
msgstr "Dolgulu Tampon"
-#: appGUI/ObjectUI.py:337 appTools/ToolIsolation.py:3467
+#: appGUI/ObjectUI.py:341 appTools/ToolIsolation.py:3467
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
@@ -6445,34 +6445,34 @@ msgstr ""
"Buna tıklamak, yalıtım için gereken tamponlu\n"
"şekli oluşturacaktır."
-#: appGUI/ObjectUI.py:353
+#: appGUI/ObjectUI.py:357
msgid "Isolation Routing"
msgstr "Yalıtım Oluşturma"
-#: appGUI/ObjectUI.py:356 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:32
+#: appGUI/ObjectUI.py:360 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:32
#: appTools/ToolIsolation.py:2965
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut around polygons."
msgstr "Çokgenleri keserek yollar oluşturma işlemi."
-#: appGUI/ObjectUI.py:371 appGUI/ObjectUI.py:1733 appTools/ToolNCC.py:4258
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1745 appTools/ToolNCC.py:4258
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr "Bakırı kazıyarak bakırsız alanlar oluşturun."
-#: appGUI/ObjectUI.py:386
+#: appGUI/ObjectUI.py:390
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr "PCB'yi kesmek için kesim şekilleri oluşturun."
-#: appGUI/ObjectUI.py:403 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:32
+#: appGUI/ObjectUI.py:407 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:32
msgid "Non-copper regions"
msgstr "Bakırsız Alanlar"
-#: appGUI/ObjectUI.py:405 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:34
+#: appGUI/ObjectUI.py:409 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:34
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
@@ -6486,13 +6486,13 @@ msgstr ""
"çerçeve çizgisinin kendisini kazıyarak bakırsız bir çerçeve oluşturur.\n"
"Tüm bakırın, belirli bir bölgeden çıkarılması için kullanılabilir."
-#: appGUI/ObjectUI.py:415 appGUI/ObjectUI.py:456
+#: appGUI/ObjectUI.py:419 appGUI/ObjectUI.py:460
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:46
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:79
msgid "Boundary Margin"
msgstr "Sınır Payı"
-#: appGUI/ObjectUI.py:417 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48
+#: appGUI/ObjectUI.py:421 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
@@ -6502,23 +6502,23 @@ msgstr ""
"Nesnelerin etrafına minimum mesafeye sahip\n"
"bir çerçeve çizerek PCB'nin kenarını gösterir."
-#: appGUI/ObjectUI.py:434 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:63
+#: appGUI/ObjectUI.py:438 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:63
msgid "Resulting geometry will have rounded corners."
msgstr "Ortaya çıkan şeklin köşeleri yuvarlatılmış olacaktır."
-#: appGUI/ObjectUI.py:437 appGUI/ObjectUI.py:477 appTools/ToolCutOut.py:2285
+#: appGUI/ObjectUI.py:441 appGUI/ObjectUI.py:481 appTools/ToolCutOut.py:2285
#: appTools/ToolCutOut.py:2300 appTools/ToolIsolation.py:3444
#: appTools/ToolNCC.py:4255 appTools/ToolPaint.py:3178
msgid "Generate Geometry"
msgstr "Şekil Oluştur"
-#: appGUI/ObjectUI.py:448 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:73
+#: appGUI/ObjectUI.py:452 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:73
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:137
#: appTools/ToolPanelize.py:698 appTools/ToolQRCode.py:782
msgid "Bounding Box"
msgstr "Sınırlayıcı Çerçeve"
-#: appGUI/ObjectUI.py:450
+#: appGUI/ObjectUI.py:454
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
@@ -6526,7 +6526,7 @@ msgstr ""
"Gerber nesnesini çevreleyen \n"
"kare şeklinde bir şekil oluşturur."
-#: appGUI/ObjectUI.py:458 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:81
+#: appGUI/ObjectUI.py:462 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:81
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
@@ -6534,7 +6534,7 @@ msgstr ""
"Sınırlayıcı kutunun en yakın \n"
"nesneye olan mesafesi."
-#: appGUI/ObjectUI.py:471 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:94
+#: appGUI/ObjectUI.py:475 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:94
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
@@ -6545,23 +6545,23 @@ msgstr ""
"yuvarlatılmışsa, yarıçapları\n"
"bırakılan paya eşit olacaktır."
-#: appGUI/ObjectUI.py:480
+#: appGUI/ObjectUI.py:484
msgid "Generate the Geometry object."
msgstr "Bir şekil nesnesi oluşturulacaktır."
-#: appGUI/ObjectUI.py:507
+#: appGUI/ObjectUI.py:511
msgid "Excellon Object"
msgstr "Excellon Nesnesi"
-#: appGUI/ObjectUI.py:524
+#: appGUI/ObjectUI.py:528
msgid "Solid circles."
msgstr "Dolgulu daireler."
-#: appGUI/ObjectUI.py:553
+#: appGUI/ObjectUI.py:557
msgid "Edit an Excellon object."
msgstr "Bir Excellon nesnesini düzenleyin."
-#: appGUI/ObjectUI.py:637 appTools/ToolDrilling.py:2067
+#: appGUI/ObjectUI.py:645 appTools/ToolDrilling.py:2067
#: appTools/ToolMilling.py:1672
msgid ""
"This is the Tool Number.\n"
@@ -6576,7 +6576,7 @@ msgstr ""
"\n"
"Burada G kodu oluşturmak için araçları seçersiniz."
-#: appGUI/ObjectUI.py:642 appGUI/ObjectUI.py:956 appTools/ToolDrilling.py:2072
+#: appGUI/ObjectUI.py:650 appGUI/ObjectUI.py:968 appTools/ToolDrilling.py:2072
#: appTools/ToolMilling.py:1677 appTools/ToolPaint.py:2827
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
@@ -6586,14 +6586,14 @@ msgstr ""
"Bu değer (geçerli FlatCAM birimlerinde)\n"
"malzemedeki kesimin genişliği."
-#: appGUI/ObjectUI.py:645 appTools/ToolDrilling.py:2075
+#: appGUI/ObjectUI.py:653 appTools/ToolDrilling.py:2075
#: appTools/ToolMilling.py:1680
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr "Matkap delikleri sayısı. Matkap kullanılarak delinecek delikler."
-#: appGUI/ObjectUI.py:648 appTools/ToolDrilling.py:2078
+#: appGUI/ObjectUI.py:656 appTools/ToolDrilling.py:2078
#: appTools/ToolMilling.py:1683
msgid ""
"The number of Slot holes. Holes that are created by\n"
@@ -6602,12 +6602,12 @@ msgstr ""
"Yuva (oval şekilli delik) sayısı. Bir frezeleme ucu ile\n"
"frezelenerek oluşturulan delikler."
-#: appGUI/ObjectUI.py:651
+#: appGUI/ObjectUI.py:659
msgid "Show the color of the drill holes when using multi-color."
msgstr ""
"Çok Renkli seçeneğini kullanırken matkap deliklerinin rengini gösterin."
-#: appGUI/ObjectUI.py:653
+#: appGUI/ObjectUI.py:661
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
@@ -6615,12 +6615,12 @@ msgstr ""
"Geçerli uç için matkap görüntüsünü değiştirir.\n"
"Ancak, G kodunu oluşturmak için hiçbir araç seçilmez."
-#: appGUI/ObjectUI.py:662
+#: appGUI/ObjectUI.py:670
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:55
msgid "Auto load from DB"
msgstr "Veri tabanından otomatik yükle"
-#: appGUI/ObjectUI.py:664
+#: appGUI/ObjectUI.py:672
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:57
msgid ""
"Automatic replacement of the tools from related application tools\n"
@@ -6630,25 +6630,25 @@ msgstr ""
"yakın kalınlık değerine sahip uçlarla otomatik olarak değiştirilmesini "
"sağlar."
-#: appGUI/ObjectUI.py:690
+#: appGUI/ObjectUI.py:698
msgid "Generate GCode out of drill holes in an Excellon object."
msgstr "Bir Excellon nesnesindeki matkap deliklerinden G Kod oluşturun."
-#: appGUI/ObjectUI.py:701
+#: appGUI/ObjectUI.py:709
msgid "Milling Tool"
msgstr "Frezeleme"
-#: appGUI/ObjectUI.py:704
+#: appGUI/ObjectUI.py:712
#, fuzzy
#| msgid "Generate GCode out of drill holes in an Excellon object."
msgid "Generate a Geometry for milling drills or slots in an Excellon object."
msgstr "Bir Excellon nesnesindeki matkap deliklerinden G Kod oluşturun."
-#: appGUI/ObjectUI.py:730
+#: appGUI/ObjectUI.py:738
msgid "Milling Geometry"
msgstr "Delik Frezeleme"
-#: appGUI/ObjectUI.py:732
+#: appGUI/ObjectUI.py:740
msgid ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
@@ -6657,22 +6657,22 @@ msgstr ""
"Yukarıdaki Araçlar Tablosundan frezelenecek delikleri seçin.\n"
"Seçim yapmak için # sütununu kullanın."
-#: appGUI/ObjectUI.py:738
+#: appGUI/ObjectUI.py:746
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:80
#: appTools/ToolMilling.py:1779
msgid "Milling Diameter"
msgstr "Freze Çapı"
-#: appGUI/ObjectUI.py:740
+#: appGUI/ObjectUI.py:748
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:101
msgid "Diameter of the cutting tool."
msgstr "Kesme ucunun çapı."
-#: appGUI/ObjectUI.py:750
+#: appGUI/ObjectUI.py:758
msgid "Mill Drills"
msgstr "Delikleri Frezele"
-#: appGUI/ObjectUI.py:752
+#: appGUI/ObjectUI.py:760
#, fuzzy
#| msgid ""
#| "Create the Geometry Object\n"
@@ -6684,11 +6684,11 @@ msgstr ""
"Yuvaları frezelemek için\n"
"Şekil nesnesi oluşturun."
-#: appGUI/ObjectUI.py:770
+#: appGUI/ObjectUI.py:778
msgid "Mill Slots"
msgstr "Yuvaları Frezele"
-#: appGUI/ObjectUI.py:772
+#: appGUI/ObjectUI.py:780
#, fuzzy
#| msgid ""
#| "Create the Geometry Object\n"
@@ -6700,15 +6700,15 @@ msgstr ""
"Yuvaları frezelemek için\n"
"Şekil nesnesi oluşturun."
-#: appGUI/ObjectUI.py:814
+#: appGUI/ObjectUI.py:822
msgid "Geometry Object"
msgstr "Kaynak Nesne"
-#: appGUI/ObjectUI.py:853
+#: appGUI/ObjectUI.py:861
msgid "Edit an Geometry object."
msgstr "Bir Şekil nesnesini düzenleyin."
-#: appGUI/ObjectUI.py:913
+#: appGUI/ObjectUI.py:925
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
@@ -6735,12 +6735,12 @@ msgstr ""
"ve Z Derinliği, V-Ucu Kalınlığı ve V-Ucu Açısı, yeniden gösterilen\n"
"kullanıcı arayüz form girişlerinden otomatik olarak hesaplanır."
-#: appGUI/ObjectUI.py:930 appGUI/ObjectUI.py:1923
+#: appGUI/ObjectUI.py:942 appGUI/ObjectUI.py:1939
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:40
msgid "Plot Object"
msgstr "Çizimi Göster"
-#: appGUI/ObjectUI.py:950
+#: appGUI/ObjectUI.py:962
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
@@ -6750,7 +6750,7 @@ msgstr ""
"Uç değiştirme onay kutusu seçilirse, uç değişikliği durumunda\n"
"bu değer T1, T2 ... Tn olarak gösterilecek"
-#: appGUI/ObjectUI.py:961
+#: appGUI/ObjectUI.py:973
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry "
@@ -6765,7 +6765,7 @@ msgstr ""
"yaratacaktır.\n"
"- Dış Taraf -> Kesme ucu dışarıdaki geometrik çizgiyi takip edecektir."
-#: appGUI/ObjectUI.py:968
+#: appGUI/ObjectUI.py:980
msgid ""
"The (Operation) Type has only informative value. Usually the UI form "
"values \n"
@@ -6788,7 +6788,7 @@ msgstr ""
"hızına\n"
"ihtiyacımız vardır."
-#: appGUI/ObjectUI.py:977
+#: appGUI/ObjectUI.py:989
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the "
@@ -6815,7 +6815,7 @@ msgstr ""
"sütundaki değere eşit olacaktır.
V-Şekli-> V-Şekil Uç Tipini "
"seçtiğinizde çalışma tipini otomatik olarak Yalıtım olarak seçecektir."
-#: appGUI/ObjectUI.py:989
+#: appGUI/ObjectUI.py:1001
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries "
"that holds the geometry\n"
@@ -6833,7 +6833,7 @@ msgstr ""
"çalışma alanı üzerindeki \n"
"çizimi etkinleştirebilir / devre dışı bırakabilirsiniz."
-#: appGUI/ObjectUI.py:1004
+#: appGUI/ObjectUI.py:1016
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
@@ -6844,19 +6844,19 @@ msgstr ""
"Değer “dış” kesim için pozitif ve “iç” kesim için\n"
"negatif olabilir."
-#: appGUI/ObjectUI.py:1023 appTools/ToolIsolation.py:3087
+#: appGUI/ObjectUI.py:1035 appTools/ToolIsolation.py:3087
#: appTools/ToolNCC.py:66 appTools/ToolNCC.py:3855 appTools/ToolPaint.py:140
#: appTools/ToolPaint.py:2878
msgid "Add from DB"
msgstr "Veri Tabanından Ekle"
-#: appGUI/ObjectUI.py:1040 appTools/ToolCutOut.py:2069
+#: appGUI/ObjectUI.py:1052 appTools/ToolCutOut.py:2069
#: appTools/ToolIsolation.py:61 appTools/ToolIsolation.py:3122
#: appTools/ToolNCC.py:3889 appTools/ToolPaint.py:2898
msgid "Search and Add"
msgstr "Ara ve Ekle"
-#: appGUI/ObjectUI.py:1043
+#: appGUI/ObjectUI.py:1055
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
@@ -6864,13 +6864,13 @@ msgstr ""
"Araçlar Tablosuna yukarıda belirtilen\n"
"kalınlıkta yeni bir uç ekleyin."
-#: appGUI/ObjectUI.py:1047 appTools/ToolCutOut.py:2081
+#: appGUI/ObjectUI.py:1059 appTools/ToolCutOut.py:2081
#: appTools/ToolIsolation.py:65 appTools/ToolIsolation.py:3133
#: appTools/ToolNCC.py:3900 appTools/ToolPaint.py:2909
msgid "Pick from DB"
msgstr "Veri Tabanından Seç"
-#: appGUI/ObjectUI.py:1050 appTools/ToolCutOut.py:2084
+#: appGUI/ObjectUI.py:1062 appTools/ToolCutOut.py:2084
#: appTools/ToolIsolation.py:3136 appTools/ToolNCC.py:3903
#: appTools/ToolPaint.py:2912
msgid ""
@@ -6883,7 +6883,7 @@ msgstr ""
"yeni bir uç ekleyin.\n"
"Menüde : Seçenekler -> Araçlar Veri tabanı"
-#: appGUI/ObjectUI.py:1072
+#: appGUI/ObjectUI.py:1084
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
@@ -6891,7 +6891,7 @@ msgstr ""
"Araçlar Tablosundaki uçları kopyalamak için, \n"
"önce Araçlar Tablosunda bir satır seçin."
-#: appGUI/ObjectUI.py:1079
+#: appGUI/ObjectUI.py:1091
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
@@ -6899,7 +6899,7 @@ msgstr ""
"Araçlar Tablosundaki uçları silmek için, \n"
"önce Araçlar Tablosunda bir satır seçin."
-#: appGUI/ObjectUI.py:1116 appObjects/FlatCAMGeometry.py:388
+#: appGUI/ObjectUI.py:1128 appObjects/FlatCAMGeometry.py:388
#: appObjects/FlatCAMGeometry.py:886 appObjects/FlatCAMGeometry.py:891
#: appObjects/FlatCAMGeometry.py:925 appObjects/FlatCAMGeometry.py:950
#: appObjects/FlatCAMGeometry.py:954 appTools/ToolDrilling.py:705
@@ -6923,7 +6923,7 @@ msgstr ""
msgid "Parameters for"
msgstr "İşlem İçin Seçenekler"
-#: appGUI/ObjectUI.py:1119 appTools/ToolDrilling.py:2119
+#: appGUI/ObjectUI.py:1131 appTools/ToolDrilling.py:2119
#: appTools/ToolIsolation.py:3169 appTools/ToolMilling.py:1714
#: appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2943
msgid ""
@@ -6933,34 +6933,34 @@ msgstr ""
"GCode oluşturmak için kullanılan veriler.\n"
"Her araç kendi bu tür verileri depolar."
-#: appGUI/ObjectUI.py:1126 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:89
+#: appGUI/ObjectUI.py:1138 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:89
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:85
msgid "V-Tip Dia"
msgstr "V-Ucu Kalınlığı"
-#: appGUI/ObjectUI.py:1129 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:91
+#: appGUI/ObjectUI.py:1141 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:74
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:80
msgid "The tip diameter for V-Shape Tool"
msgstr "V Ucu için uç kalınlığı"
-#: appGUI/ObjectUI.py:1141 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:101
+#: appGUI/ObjectUI.py:1153 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:84
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:99
msgid "V-Tip Angle"
msgstr "V-Ucu Açısı"
-#: appGUI/ObjectUI.py:1144 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:86
+#: appGUI/ObjectUI.py:1156 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:86
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:93
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr "V ucu için uç kalınlığı. Derece olarak."
-#: appGUI/ObjectUI.py:1160
+#: appGUI/ObjectUI.py:1172
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:51
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61
#: appObjects/FlatCAMGeometry.py:1374 appTools/ToolCutOut.py:2105
@@ -6969,7 +6969,7 @@ msgid ""
"below the copper surface."
msgstr "Bakır yüzeyinin altında kesme derinliği (negatif)."
-#: appGUI/ObjectUI.py:1178
+#: appGUI/ObjectUI.py:1190
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:69
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:79
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:77
@@ -6978,14 +6978,14 @@ msgstr "Bakır yüzeyinin altında kesme derinliği (negatif)."
msgid "Multi-Depth"
msgstr "Çoklu Geçiş"
-#: appGUI/ObjectUI.py:1206
+#: appGUI/ObjectUI.py:1218
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:104
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr "Kesmeden hareket ederken ucun yüksekliği."
-#: appGUI/ObjectUI.py:1225
+#: appGUI/ObjectUI.py:1237
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:188
#: appTools/ToolMilling.py:1862
msgid ""
@@ -6993,7 +6993,7 @@ msgid ""
"plane in units per minute"
msgstr "Dakikada birim olarak XY düzleminde kesme hızı"
-#: appGUI/ObjectUI.py:1239
+#: appGUI/ObjectUI.py:1251
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:203
msgid ""
"Cutting speed in the XY\n"
@@ -7003,7 +7003,7 @@ msgstr ""
"Dakikada birim olarak XY düzleminde kesme hızı.\n"
"Buna Daldırma da denir."
-#: appGUI/ObjectUI.py:1254
+#: appGUI/ObjectUI.py:1266
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:69
msgid ""
"Cutting speed in the XY plane\n"
@@ -7016,13 +7016,13 @@ msgstr ""
"Bu, hızlı hareket G00 içindir.\n"
"Sadece Marlin için yararlıdır, diğer durumlar için yok sayın."
-#: appGUI/ObjectUI.py:1272
+#: appGUI/ObjectUI.py:1284
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:85
#: appTools/ToolMilling.py:1914
msgid "Re-cut"
msgstr "Kesim Tekrarı"
-#: appGUI/ObjectUI.py:1274 appGUI/ObjectUI.py:1286
+#: appGUI/ObjectUI.py:1286 appGUI/ObjectUI.py:1298
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:87
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:99
#: appTools/ToolMilling.py:1916 appTools/ToolMilling.py:1929
@@ -7036,7 +7036,7 @@ msgstr ""
"kaldırmak için ilk kesim bölümüne yakın bir kesim\n"
"oluşturulur."
-#: appGUI/ObjectUI.py:1298
+#: appGUI/ObjectUI.py:1310
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:220
msgid ""
"Speed of the spindle in RPM (optional).\n"
@@ -7046,7 +7046,7 @@ msgstr ""
"Matkap ucunun devir/dakika cinsinden hızı (isteğe bağlı).\n"
"LAZER önişlemcisi kullanılıyorsa, bu değer lazerin gücüdür."
-#: appGUI/ObjectUI.py:1314
+#: appGUI/ObjectUI.py:1326
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:235
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:202
#: appTools/ToolDrilling.py:2266 appTools/ToolMilling.py:1959
@@ -7057,7 +7057,7 @@ msgstr ""
"Kesmeye başlamadan önce ucun gerekli\n"
"hıza ulaşmasını sağlamak için bekleyin."
-#: appGUI/ObjectUI.py:1324
+#: appGUI/ObjectUI.py:1336
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:240
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:210
#: appTools/ToolDrilling.py:2278 appTools/ToolMilling.py:1970
@@ -7066,7 +7066,7 @@ msgstr ""
"Ucun gerekli hıza ulaşması için beklenmesi\n"
"gereken zaman birimi."
-#: appGUI/ObjectUI.py:1332 appGUI/ObjectUI.py:2055
+#: appGUI/ObjectUI.py:1344 appGUI/ObjectUI.py:2071
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333
@@ -7074,7 +7074,7 @@ msgstr ""
msgid "Probe Z depth"
msgstr "Prob Z Derinliği"
-#: appGUI/ObjectUI.py:1334 appGUI/ObjectUI.py:2057
+#: appGUI/ObjectUI.py:1346 appGUI/ObjectUI.py:2073
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335
@@ -7086,14 +7086,14 @@ msgstr ""
"Prob (algılayıcı) için izin verilen maksimum derinlik.\n"
"Geçerli birimlerde negatif değer."
-#: appGUI/ObjectUI.py:1349
+#: appGUI/ObjectUI.py:1361
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:123
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:346
#: appTools/ToolDrilling.py:2480 appTools/ToolMilling.py:2148
msgid "Feedrate Probe"
msgstr "Probun İlerleme Hızı"
-#: appGUI/ObjectUI.py:1351 appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:1363 appGUI/ObjectUI.py:2086
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348
@@ -7101,13 +7101,13 @@ msgstr "Probun İlerleme Hızı"
msgid "The feedrate used while the probe is probing."
msgstr "Prob (algılayıcı) algılama yaparken kullanılan ilerleme hızı."
-#: appGUI/ObjectUI.py:1378 appTools/ToolDrilling.py:2364
+#: appGUI/ObjectUI.py:1390 appTools/ToolDrilling.py:2364
#: appTools/ToolIsolation.py:3265 appTools/ToolMilling.py:2042
#: appTools/ToolNCC.py:4094 appTools/ToolPaint.py:3049
msgid "Apply parameters to all tools"
msgstr "Seçenekleri Tüm Araçlara Uygula"
-#: appGUI/ObjectUI.py:1381 appTools/ToolDrilling.py:2367
+#: appGUI/ObjectUI.py:1393 appTools/ToolDrilling.py:2367
#: appTools/ToolIsolation.py:3268 appTools/ToolMilling.py:2045
#: appTools/ToolNCC.py:4097 appTools/ToolPaint.py:3052
msgid ""
@@ -7117,24 +7117,24 @@ msgstr ""
"Formdaki geçerli seçenekler, Araçlar Tablosundaki \n"
"tüm uçlara uygulanacaktır."
-#: appGUI/ObjectUI.py:1392 appTools/ToolDrilling.py:2378
+#: appGUI/ObjectUI.py:1404 appTools/ToolDrilling.py:2378
#: appTools/ToolIsolation.py:3279 appTools/ToolMilling.py:2056
#: appTools/ToolNCC.py:4108 appTools/ToolPaint.py:3063
msgid "Common Parameters"
msgstr "Ortak Seçenekler"
-#: appGUI/ObjectUI.py:1394 appTools/ToolDrilling.py:2380
+#: appGUI/ObjectUI.py:1406 appTools/ToolDrilling.py:2380
#: appTools/ToolIsolation.py:3281 appTools/ToolMilling.py:2058
#: appTools/ToolNCC.py:4110 appTools/ToolPaint.py:3065
msgid "Parameters that are common for all tools."
msgstr "Tüm araçlar için ortak olan seçenekler."
-#: appGUI/ObjectUI.py:1399 appTools/ToolDrilling.py:2394
+#: appGUI/ObjectUI.py:1411 appTools/ToolDrilling.py:2394
#: appTools/ToolMilling.py:2063
msgid "Tool change Z"
msgstr "Z Uç Değiştir"
-#: appGUI/ObjectUI.py:1402
+#: appGUI/ObjectUI.py:1414
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:125
msgid ""
"Include tool-change sequence\n"
@@ -7143,7 +7143,7 @@ msgstr ""
"G-Kod'a uç değiştirme sırasını dahil edin\n"
"(uç değiştirme için duraklat)."
-#: appGUI/ObjectUI.py:1410
+#: appGUI/ObjectUI.py:1422
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:135
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:126
#: appTools/ToolDrilling.py:2396 appTools/ToolMilling.py:2072
@@ -7154,14 +7154,14 @@ msgstr ""
"Uç değiştirme için Z ekseni \n"
"konumu (yükseklik)."
-#: appGUI/ObjectUI.py:1438
+#: appGUI/ObjectUI.py:1450
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:154
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:142
#: appTools/ToolDrilling.py:2427 appTools/ToolMilling.py:2098
msgid "End move Z"
msgstr "Z Son Hareket"
-#: appGUI/ObjectUI.py:1440
+#: appGUI/ObjectUI.py:1452
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:156
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:144
#: appTools/ToolDrilling.py:2429 appTools/ToolMilling.py:2100
@@ -7170,14 +7170,14 @@ msgid ""
"the last move at the end of the job."
msgstr "İşin bitiminde ucun yüksekliği."
-#: appGUI/ObjectUI.py:1457
+#: appGUI/ObjectUI.py:1469
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:174
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:159
#: appTools/ToolDrilling.py:2447 appTools/ToolMilling.py:2117
msgid "End move X,Y"
msgstr "X, Y Son Hareket"
-#: appGUI/ObjectUI.py:1459
+#: appGUI/ObjectUI.py:1471
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:176
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:161
#: appTools/ToolDrilling.py:2449 appTools/ToolMilling.py:2119
@@ -7191,12 +7191,12 @@ msgstr ""
"Hiçbir değer girilmezse, iş sonunda X, Y düzleminde\n"
"iş hangi noktada bitmişse uç o noktada kalır."
-#: appGUI/ObjectUI.py:1464 appTools/ToolDrilling.py:2454
+#: appGUI/ObjectUI.py:1476 appTools/ToolDrilling.py:2454
#: appTools/ToolMilling.py:2124
msgid "X,Y coordinates"
msgstr "X, Y Koordinatları"
-#: appGUI/ObjectUI.py:1472
+#: appGUI/ObjectUI.py:1484
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:257
msgid ""
"The Preprocessor file that dictates\n"
@@ -7205,12 +7205,12 @@ msgstr ""
"Makine kodunun çıktısını belirleyen bir önişlemci dosyası. \n"
"Örneğin: (G-Kod, RML, HPGL gibi)."
-#: appGUI/ObjectUI.py:1488 appTools/ToolDrilling.py:2515
+#: appGUI/ObjectUI.py:1500 appTools/ToolDrilling.py:2515
#: appTools/ToolMilling.py:2194
msgid "Add exclusion areas"
msgstr "Dışlama Alanları Ekle"
-#: appGUI/ObjectUI.py:1491
+#: appGUI/ObjectUI.py:1503
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:212
#: appTools/ToolDrilling.py:2518 appTools/ToolMilling.py:2197
msgid ""
@@ -7221,31 +7221,31 @@ msgstr ""
"Dışlama alanlarını ekleyin.\n"
"Bu alanlarda uçların dolaşımı yasaktır."
-#: appGUI/ObjectUI.py:1512 appGUI/ObjectUI.py:1531
+#: appGUI/ObjectUI.py:1524 appGUI/ObjectUI.py:1543
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:232
#: appTools/ToolDrilling.py:2540 appTools/ToolDrilling.py:2559
#: appTools/ToolMilling.py:2218 appTools/ToolMilling.py:2237
msgid "Strategy"
msgstr "Yöntem"
-#: appGUI/ObjectUI.py:1512 appGUI/ObjectUI.py:1543
+#: appGUI/ObjectUI.py:1524 appGUI/ObjectUI.py:1555
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:244
#: appTools/ToolDrilling.py:2540 appTools/ToolDrilling.py:2572
#: appTools/ToolMilling.py:2218 appTools/ToolMilling.py:2249
msgid "Over Z"
msgstr "Z Yukarı"
-#: appGUI/ObjectUI.py:1514 appTools/ToolDrilling.py:2542
+#: appGUI/ObjectUI.py:1526 appTools/ToolDrilling.py:2542
#: appTools/ToolMilling.py:2220
msgid "This is the Area ID."
msgstr "Bu bölge tanımlayıcısıdır."
-#: appGUI/ObjectUI.py:1516 appTools/ToolDrilling.py:2544
+#: appGUI/ObjectUI.py:1528 appTools/ToolDrilling.py:2544
#: appTools/ToolMilling.py:2222
msgid "Type of the object where the exclusion area was added."
msgstr "Dışlama alanının eklendiği nesnenin türü."
-#: appGUI/ObjectUI.py:1518 appTools/ToolDrilling.py:2546
+#: appGUI/ObjectUI.py:1530 appTools/ToolDrilling.py:2546
#: appTools/ToolMilling.py:2224
msgid ""
"The strategy used for exclusion area. Go around the exclusion areas or over "
@@ -7254,7 +7254,7 @@ msgstr ""
"Dışlama alanı için kullanılan yöntem. Dışlama alanlarının etrafından dolaşın "
"veya üzerinden geçin."
-#: appGUI/ObjectUI.py:1520 appTools/ToolDrilling.py:2548
+#: appGUI/ObjectUI.py:1532 appTools/ToolDrilling.py:2548
#: appTools/ToolMilling.py:2226
msgid ""
"If the strategy is to go over the area then this is the height at which the "
@@ -7263,7 +7263,7 @@ msgstr ""
"Yöntem \"Yukarı\" olarak seçilmişse bu, ucun dışlama alanından kaçınmak için "
"gideceği yüksekliktir."
-#: appGUI/ObjectUI.py:1532
+#: appGUI/ObjectUI.py:1544
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:233
#: appTools/ToolDrilling.py:2560 appTools/ToolMilling.py:2238
msgid ""
@@ -7279,19 +7279,19 @@ msgstr ""
"- Etrafından -> Uç, dışlama alanının çevresini dolaşarak dışlama alanından "
"kaçınır"
-#: appGUI/ObjectUI.py:1536
+#: appGUI/ObjectUI.py:1548
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:237
#: appTools/ToolDrilling.py:2564 appTools/ToolMilling.py:2242
msgid "Over"
msgstr "Yukarı"
-#: appGUI/ObjectUI.py:1537
+#: appGUI/ObjectUI.py:1549
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:238
#: appTools/ToolDrilling.py:2565 appTools/ToolMilling.py:2243
msgid "Around"
msgstr "Etrafından"
-#: appGUI/ObjectUI.py:1544
+#: appGUI/ObjectUI.py:1556
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:245
#: appTools/ToolDrilling.py:2573 appTools/ToolMilling.py:2250
msgid ""
@@ -7301,17 +7301,17 @@ msgstr ""
"Bir dışlama bölgesinden kaçınmak için \n"
"ucun yukarı kalkacağı Z yüksekliği."
-#: appGUI/ObjectUI.py:1554 appTools/ToolDrilling.py:2584
+#: appGUI/ObjectUI.py:1566 appTools/ToolDrilling.py:2584
#: appTools/ToolMilling.py:2260
msgid "Add area:"
msgstr "Alan Ekle:"
-#: appGUI/ObjectUI.py:1555 appTools/ToolDrilling.py:2585
+#: appGUI/ObjectUI.py:1567 appTools/ToolDrilling.py:2585
#: appTools/ToolMilling.py:2261
msgid "Add an Exclusion Area."
msgstr "Bir dışlama alanı ekleyin."
-#: appGUI/ObjectUI.py:1561
+#: appGUI/ObjectUI.py:1573
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:222
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:305
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
@@ -7322,7 +7322,7 @@ msgstr "Bir dışlama alanı ekleyin."
msgid "The kind of selection shape used for area selection."
msgstr "Dışlama alanı seçmek için kullanılan seçim şeklinin görünümü."
-#: appGUI/ObjectUI.py:1571
+#: appGUI/ObjectUI.py:1583
#: appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:32
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:42
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:32
@@ -7331,26 +7331,26 @@ msgstr "Dışlama alanı seçmek için kullanılan seçim şeklinin görünümü
msgid "Delete All"
msgstr "Tümünü Sil"
-#: appGUI/ObjectUI.py:1572 appTools/ToolDrilling.py:2603
+#: appGUI/ObjectUI.py:1584 appTools/ToolDrilling.py:2603
#: appTools/ToolMilling.py:2278
msgid "Delete all exclusion areas."
msgstr "Dışlama alanlarının tümünü silin."
-#: appGUI/ObjectUI.py:1575 appTools/ToolDrilling.py:2606
+#: appGUI/ObjectUI.py:1587 appTools/ToolDrilling.py:2606
#: appTools/ToolMilling.py:2281
msgid "Delete Selected"
msgstr "Seçilenleri Sil"
-#: appGUI/ObjectUI.py:1576 appTools/ToolDrilling.py:2607
+#: appGUI/ObjectUI.py:1588 appTools/ToolDrilling.py:2607
#: appTools/ToolMilling.py:2282
msgid "Delete all exclusion areas that are selected in the table."
msgstr "Tabloda seçilen dışlama alanlarını siler."
-#: appGUI/ObjectUI.py:1586
+#: appGUI/ObjectUI.py:1598
msgid "Add Polish"
msgstr "Parlatma Ekle"
-#: appGUI/ObjectUI.py:1588
+#: appGUI/ObjectUI.py:1600
msgid ""
"Will add a Paint section at the end of the GCode.\n"
"A metallic brush will clean the material after milling."
@@ -7358,15 +7358,15 @@ msgstr ""
"G-Kod'un sonuna bir Çizim bölümü ekleyecektir.\n"
"Bir tel fırça, freze işleminden sonra malzemeyi temizleyecektir."
-#: appGUI/ObjectUI.py:1596
+#: appGUI/ObjectUI.py:1608
msgid "Diameter for the polishing tool."
msgstr "Parlatma ucu için kalınlık."
-#: appGUI/ObjectUI.py:1607
+#: appGUI/ObjectUI.py:1619
msgid "Pressure"
msgstr "Baskı"
-#: appGUI/ObjectUI.py:1609
+#: appGUI/ObjectUI.py:1621
msgid ""
"Negative value. The higher the absolute value\n"
"the stronger the pressure of the brush on the material."
@@ -7374,7 +7374,7 @@ msgstr ""
"Negatif değer. Sayının tam değer kısmı ne kadar yüksekse\n"
"fırçanın malzeme üzerindeki baskısı o kadar güçlüdür."
-#: appGUI/ObjectUI.py:1638
+#: appGUI/ObjectUI.py:1650
msgid ""
"Algorithm for polishing:\n"
"- Standard: Fixed step inwards.\n"
@@ -7386,16 +7386,16 @@ msgstr ""
"- Nokta Bazlı: Merkezden dışarıya doğru.\n"
"- Çizgi Bazlı: Paralel çizgiler."
-#: appGUI/ObjectUI.py:1682 appTools/ToolDrilling.py:2629
+#: appGUI/ObjectUI.py:1694 appTools/ToolDrilling.py:2629
#: appTools/ToolMilling.py:2304
msgid "Generate CNCJob object"
msgstr "CNC İş Nesnesi Oluştur"
-#: appGUI/ObjectUI.py:1685
+#: appGUI/ObjectUI.py:1697
msgid "Generate CNCJob object."
msgstr "CNC İş Nesnesi Oluşturun."
-#: appGUI/ObjectUI.py:1687
+#: appGUI/ObjectUI.py:1699
msgid ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
@@ -7405,11 +7405,11 @@ msgstr ""
"Tümünü seçmek için # sütunun tıklayın veya\n"
"araçları elle seçmek için Ctrl tuşuna basıp sol tıklayın."
-#: appGUI/ObjectUI.py:1706
+#: appGUI/ObjectUI.py:1718
msgid "Launch Paint Tool in Tools Tab."
msgstr "Araçlar sekmesindeki \"Çizim\" aracını başlatır."
-#: appGUI/ObjectUI.py:1715 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:35
+#: appGUI/ObjectUI.py:1727 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:35
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
@@ -7419,11 +7419,11 @@ msgstr ""
"PCB'de yollar dışında kalan tüm bakır kazınarak çıkarılır.\n"
"Bakır temizliği yapılacak alanı tıklamanız istenir."
-#: appGUI/ObjectUI.py:1771
+#: appGUI/ObjectUI.py:1783
msgid "CNC Job Object"
msgstr "CNC İş Nesnesi"
-#: appGUI/ObjectUI.py:1787 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:54
+#: appGUI/ObjectUI.py:1799 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:54
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
@@ -7434,19 +7434,19 @@ msgstr ""
"'Hareket' tipinde olabilirler, yani nesnenin üzerindeki çizimler.\n"
"'Kesim' tipinde olabilirler, yani nesneyi kesen çizimler."
-#: appGUI/ObjectUI.py:1796 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:62
+#: appGUI/ObjectUI.py:1808 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:62
msgid "Travel"
msgstr "Hareket"
-#: appGUI/ObjectUI.py:1819
+#: appGUI/ObjectUI.py:1831
msgid "Edit an GCode object."
msgstr "Bir GCode nesnesini düzenleyin."
-#: appGUI/ObjectUI.py:1852 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:71
+#: appGUI/ObjectUI.py:1868 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:71
msgid "Display Annotation"
msgstr "Hareket Sıra Numarasını Göster"
-#: appGUI/ObjectUI.py:1854 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:73
+#: appGUI/ObjectUI.py:1870 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:73
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
@@ -7457,12 +7457,12 @@ msgstr ""
"Onay kutusu işaretlenirse, hareket hattı sırasını gösteren \n"
"numaralar gösterilir."
-#: appGUI/ObjectUI.py:1866 appObjects/FlatCAMObj.py:861
+#: appGUI/ObjectUI.py:1882 appObjects/FlatCAMObj.py:861
#: appTools/ToolProperties.py:562
msgid "Travelled distance"
msgstr "Katedilen Mesafe"
-#: appGUI/ObjectUI.py:1868
+#: appGUI/ObjectUI.py:1884
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
@@ -7470,11 +7470,11 @@ msgstr ""
"Bu, X-Y düzleminde katedilen toplam mesafedir.\n"
"Mevcut birimlerde."
-#: appGUI/ObjectUI.py:1879
+#: appGUI/ObjectUI.py:1895
msgid "Estimated time"
msgstr "Tahmini Süre"
-#: appGUI/ObjectUI.py:1881
+#: appGUI/ObjectUI.py:1897
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
@@ -7482,11 +7482,11 @@ msgstr ""
"Bu, uç değiştirme işlemleri için harcanan zaman olmadan\n"
"yönlendirme/delme işlemlerinin tahmini süresidir."
-#: appGUI/ObjectUI.py:1905
+#: appGUI/ObjectUI.py:1921
msgid "CNC Tools Table"
msgstr "CNC Uç Tablosu"
-#: appGUI/ObjectUI.py:1908
+#: appGUI/ObjectUI.py:1924
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
@@ -7508,23 +7508,23 @@ msgstr ""
"'Uç tipi' (TT) 1 ila 4 dişli (C1..C4), bilyalı (B) veya V Şekilli (V) \n"
"dairesel olabilir."
-#: appGUI/ObjectUI.py:1936 appGUI/ObjectUI.py:1947
+#: appGUI/ObjectUI.py:1952 appGUI/ObjectUI.py:1963
msgid "P"
msgstr "P"
-#: appGUI/ObjectUI.py:1957
+#: appGUI/ObjectUI.py:1973
msgid "Update Plot"
msgstr "Çizimi Güncelle"
-#: appGUI/ObjectUI.py:1959
+#: appGUI/ObjectUI.py:1975
msgid "Update the plot."
msgstr "Çizimi güncelleyin."
-#: appGUI/ObjectUI.py:1969
+#: appGUI/ObjectUI.py:1985
msgid "Use CNC Code Snippets"
msgstr "CNC Kod Eklentileri Kullan"
-#: appGUI/ObjectUI.py:1971
+#: appGUI/ObjectUI.py:1987
msgid ""
"When selected, it will include CNC Code snippets (append and prepend)\n"
"defined in the Preferences."
@@ -7532,44 +7532,44 @@ msgstr ""
"Seçildiğinde, Ayarlarda tanımlanan CNC Kodu eklentileri\n"
"(başa ekleme ve sona ekleme) içerecektir."
-#: appGUI/ObjectUI.py:1977
+#: appGUI/ObjectUI.py:1993
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:64
msgid "Autolevelling"
msgstr "Otomatik Dengeleme"
-#: appGUI/ObjectUI.py:1979
+#: appGUI/ObjectUI.py:1995
msgid "Enable the autolevelling feature."
msgstr "Otomatik dengeleme özelliğini etkinleştirin."
-#: appGUI/ObjectUI.py:1996
+#: appGUI/ObjectUI.py:2012
msgid "Probe Points Table"
msgstr "Prob Noktaları Tablosu"
-#: appGUI/ObjectUI.py:1997
+#: appGUI/ObjectUI.py:2013
msgid "Generate GCode that will obtain the height map"
msgstr "Yükseklik haritasını elde edecek G-Kodu oluşturun"
-#: appGUI/ObjectUI.py:1999
+#: appGUI/ObjectUI.py:2015
msgid "Show"
msgstr "Göster"
-#: appGUI/ObjectUI.py:2000
+#: appGUI/ObjectUI.py:2016
msgid "Toggle the display of the Probe Points table."
msgstr "Prob (algılayıcı) noktaları tablosunun görüntülenmesini sağlar."
-#: appGUI/ObjectUI.py:2013
+#: appGUI/ObjectUI.py:2029
msgid "X-Y Coordinates"
msgstr "X-Y Koordinatları"
-#: appGUI/ObjectUI.py:2013
+#: appGUI/ObjectUI.py:2029
msgid "Height"
msgstr "Yükseklik"
-#: appGUI/ObjectUI.py:2017
+#: appGUI/ObjectUI.py:2033
msgid "Plot probing points"
msgstr "Prob (algılayıcı) noktalarını işaretleyin"
-#: appGUI/ObjectUI.py:2019
+#: appGUI/ObjectUI.py:2035
msgid ""
"Plot the probing points in the table.\n"
"If a Voronoi method is used then\n"
@@ -7578,11 +7578,11 @@ msgstr ""
"Araştırma noktalarını tabloya çizin.\n"
"Bir Voronoi yöntemi kullanılırsa, Voronoi alanları da çizilir."
-#: appGUI/ObjectUI.py:2034
+#: appGUI/ObjectUI.py:2050
msgid "Probe GCode Generation"
msgstr "Prob G-Kod'u Oluştur"
-#: appGUI/ObjectUI.py:2036
+#: appGUI/ObjectUI.py:2052
msgid ""
"Will create a GCode which will be sent to the controller,\n"
"either through a file or directly, with the intent to get the height map\n"
@@ -7592,27 +7592,27 @@ msgstr ""
"için yükseklik haritasını elde etmek amacıyla, bir dosya aracılığıyla\n"
"veya doğrudan denetleyiciye gönderilecek bir G-Kodu oluşturur."
-#: appGUI/ObjectUI.py:2043
+#: appGUI/ObjectUI.py:2059
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
msgid "Probe Z travel"
msgstr "Z Prob Yüksekliği"
-#: appGUI/ObjectUI.py:2045
+#: appGUI/ObjectUI.py:2061
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
msgid "The safe Z for probe travelling between probe points."
msgstr "Probun (algılayıcı) noktalar arasında hareketi sırasında Z yüksekliği."
-#: appGUI/ObjectUI.py:2068
+#: appGUI/ObjectUI.py:2084
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
msgid "Probe Feedrate"
msgstr "Prob İlerleme Hızı"
-#: appGUI/ObjectUI.py:2085
+#: appGUI/ObjectUI.py:2101
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
msgid "Mode"
msgstr "Yöntem"
-#: appGUI/ObjectUI.py:2086
+#: appGUI/ObjectUI.py:2102
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
msgid ""
"Choose a mode for height map generation.\n"
@@ -7624,19 +7624,19 @@ msgstr ""
"seçer\n"
"- Izgara: Otomatik olarak bir prob (algılayıcı) noktaları ızgarası oluşturur"
-#: appGUI/ObjectUI.py:2092
+#: appGUI/ObjectUI.py:2108
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74
#: appTools/ToolCutOut.py:2322 appTools/ToolFiducials.py:801
msgid "Manual"
msgstr "El İle"
-#: appGUI/ObjectUI.py:2093
+#: appGUI/ObjectUI.py:2109
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
msgid "Grid"
msgstr "Izgara"
-#: appGUI/ObjectUI.py:2100
+#: appGUI/ObjectUI.py:2116
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
msgid ""
"Choose a method for approximation of heights from autolevelling data.\n"
@@ -7648,50 +7648,50 @@ msgstr ""
"- Çift Çizgili: Çift çizgili enterpolasyon kullanacaktır. Yalnızca ızgara "
"modu için kullanılabilir."
-#: appGUI/ObjectUI.py:2106
+#: appGUI/ObjectUI.py:2122
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
msgid "Voronoi"
msgstr "Voronoi"
-#: appGUI/ObjectUI.py:2107
+#: appGUI/ObjectUI.py:2123
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
msgid "Bilinear"
msgstr "Çift Çizgili"
-#: appGUI/ObjectUI.py:2120
+#: appGUI/ObjectUI.py:2136
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77
#: appTools/ToolPanelize.py:787
msgid "Columns"
msgstr "Sütunlar"
-#: appGUI/ObjectUI.py:2122
+#: appGUI/ObjectUI.py:2138
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
msgid "The number of grid columns."
msgstr "Izgara sütunlarının sayısı."
-#: appGUI/ObjectUI.py:2131
+#: appGUI/ObjectUI.py:2147
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89
#: appTools/ToolPanelize.py:797
msgid "Rows"
msgstr "Satırlar"
-#: appGUI/ObjectUI.py:2133
+#: appGUI/ObjectUI.py:2149
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
msgid "The number of gird rows."
msgstr "Izgara satırlarının sayısı."
-#: appGUI/ObjectUI.py:2138
+#: appGUI/ObjectUI.py:2154
msgid "Add Probe Points"
msgstr "Prob Noktaları Ekleyin"
-#: appGUI/ObjectUI.py:2146
+#: appGUI/ObjectUI.py:2162
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
msgid "Controller"
msgstr "Denetleyici"
-#: appGUI/ObjectUI.py:2148
+#: appGUI/ObjectUI.py:2164
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
msgid ""
"The kind of controller for which to generate\n"
@@ -7700,147 +7700,147 @@ msgstr ""
"Yükseklik haritasının G-Kode'unu oluşturacak \n"
"denetleyici türü."
-#: appGUI/ObjectUI.py:2194 appGUI/ObjectUI.py:2209
+#: appGUI/ObjectUI.py:2210 appGUI/ObjectUI.py:2225
#: appObjects/FlatCAMCNCJob.py:1293 appObjects/FlatCAMCNCJob.py:1315
msgid "Control"
msgstr "Kontrol"
-#: appGUI/ObjectUI.py:2204 appGUI/ObjectUI.py:2211
+#: appGUI/ObjectUI.py:2220 appGUI/ObjectUI.py:2227
#: appObjects/FlatCAMCNCJob.py:1295 appObjects/FlatCAMCNCJob.py:1317
msgid "Sender"
msgstr "Gönderici"
-#: appGUI/ObjectUI.py:2225
+#: appGUI/ObjectUI.py:2241
msgid "COM list"
msgstr "COM listesi"
-#: appGUI/ObjectUI.py:2227 appGUI/ObjectUI.py:2242
+#: appGUI/ObjectUI.py:2243 appGUI/ObjectUI.py:2258
msgid "Lists the available serial ports."
msgstr "Kullanılabilir seri bağlantı noktalarını listeler."
-#: appGUI/ObjectUI.py:2231
+#: appGUI/ObjectUI.py:2247
msgid "Search"
msgstr "Ara"
-#: appGUI/ObjectUI.py:2233
+#: appGUI/ObjectUI.py:2249
msgid "Search for the available serial ports."
msgstr "Kullanılabilir seri bağlantı noktalarını arayın."
-#: appGUI/ObjectUI.py:2240
+#: appGUI/ObjectUI.py:2256
msgid "Baud rates"
msgstr "İletişim Hızı"
-#: appGUI/ObjectUI.py:2259
+#: appGUI/ObjectUI.py:2275
msgid "New, custom baudrate."
msgstr "Yeni, özel iletişim hızı."
-#: appGUI/ObjectUI.py:2267
+#: appGUI/ObjectUI.py:2283
msgid "Add the specified custom baudrate to the list."
msgstr "Belirtilen özel iletişim hızını listeye ekleyin."
-#: appGUI/ObjectUI.py:2273
+#: appGUI/ObjectUI.py:2289
msgid "Delete selected baudrate"
msgstr "Seçili iletişim hızını sil"
-#: appGUI/ObjectUI.py:2277
+#: appGUI/ObjectUI.py:2293
msgid "Reset"
msgstr "Sıfırla"
-#: appGUI/ObjectUI.py:2279
+#: appGUI/ObjectUI.py:2295
msgid "Software reset of the controller."
msgstr "Denetleyicinin yazılım sıfırlaması."
-#: appGUI/ObjectUI.py:2285 appObjects/FlatCAMCNCJob.py:1309
+#: appGUI/ObjectUI.py:2301 appObjects/FlatCAMCNCJob.py:1309
msgid "Disconnected"
msgstr "Bağlantı kesildi"
-#: appGUI/ObjectUI.py:2287
+#: appGUI/ObjectUI.py:2303
msgid "Connect to the selected port with the selected baud rate."
msgstr "Seçilen iletişim hızı ile seçilen bağlantı noktasına bağlanın."
-#: appGUI/ObjectUI.py:2312
+#: appGUI/ObjectUI.py:2328
msgid "Jog"
msgstr "İlerlet"
-#: appGUI/ObjectUI.py:2320
+#: appGUI/ObjectUI.py:2336
msgid "Zero Axes"
msgstr "Eksenleri Sıfırla"
-#: appGUI/ObjectUI.py:2353
+#: appGUI/ObjectUI.py:2369
msgid "Pause/Resume"
msgstr "Duraklat/Devam Ettir"
-#: appGUI/ObjectUI.py:2375
+#: appGUI/ObjectUI.py:2391
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
msgid "Step"
msgstr "Adım"
-#: appGUI/ObjectUI.py:2377
+#: appGUI/ObjectUI.py:2393
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
msgid "Each jog action will move the axes with this value."
msgstr "Her ilerletme eylemi, eksenleri bu değerle hareket ettirecektir."
-#: appGUI/ObjectUI.py:2389
+#: appGUI/ObjectUI.py:2405
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89
#: appObjects/FlatCAMObj.py:828 appTools/ToolProperties.py:529
msgid "Feedrate"
msgstr "İlerleme Hızı"
-#: appGUI/ObjectUI.py:2391
+#: appGUI/ObjectUI.py:2407
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
msgid "Feedrate when jogging."
msgstr "İlerleme sırasında hareket hızı."
-#: appGUI/ObjectUI.py:2411
+#: appGUI/ObjectUI.py:2427
msgid "Send Command"
msgstr "Komut Gönder"
-#: appGUI/ObjectUI.py:2413 appGUI/ObjectUI.py:2423
+#: appGUI/ObjectUI.py:2429 appGUI/ObjectUI.py:2439
msgid "Send a custom command to GRBL."
msgstr "GRBL'ye özel bir komut gönderin."
-#: appGUI/ObjectUI.py:2418
+#: appGUI/ObjectUI.py:2434
msgid "Type GRBL command ..."
msgstr "GRBL komutunu yazın ..."
-#: appGUI/ObjectUI.py:2421
+#: appGUI/ObjectUI.py:2437
msgid "Send"
msgstr "Gönder"
-#: appGUI/ObjectUI.py:2429
+#: appGUI/ObjectUI.py:2445
msgid "Get Config parameter"
msgstr "Yapılandırma Seçeneklerini Al"
-#: appGUI/ObjectUI.py:2431
+#: appGUI/ObjectUI.py:2447
msgid "A GRBL configuration parameter."
msgstr "Bir GRBL yapılandırma seçeneği."
-#: appGUI/ObjectUI.py:2436
+#: appGUI/ObjectUI.py:2452
msgid "Type GRBL parameter ..."
msgstr "GRBL seçeneğini girin ..."
-#: appGUI/ObjectUI.py:2439
+#: appGUI/ObjectUI.py:2455
msgid "Get"
msgstr "Al"
-#: appGUI/ObjectUI.py:2441
+#: appGUI/ObjectUI.py:2457
msgid "Get the value of a specified GRBL parameter."
msgstr "Belirtilen bir GRBL seçeneğinin değerini alın."
-#: appGUI/ObjectUI.py:2449
+#: appGUI/ObjectUI.py:2465
msgid "Get Report"
msgstr "Rapor Al"
-#: appGUI/ObjectUI.py:2451
+#: appGUI/ObjectUI.py:2467
msgid "Print in shell the GRBL report."
msgstr "GRBL raporunu komut satırına yazdırın."
-#: appGUI/ObjectUI.py:2457
+#: appGUI/ObjectUI.py:2473
msgid "Apply AutoLevelling"
msgstr "Otomatik Dengelemeyi Uygula"
-#: appGUI/ObjectUI.py:2459
+#: appGUI/ObjectUI.py:2475
msgid ""
"Will send the probing GCode to the GRBL controller,\n"
"wait for the Z probing data and then apply this data\n"
@@ -7851,28 +7851,28 @@ msgstr ""
"orijinal G-Kod üzerine uygulayacak ve böylece \n"
"otomatik dengeleme yapacak."
-#: appGUI/ObjectUI.py:2468
+#: appGUI/ObjectUI.py:2484
msgid "Will save the GRBL height map."
msgstr "GRBL yükseklik haritasını kaydeder."
-#: appGUI/ObjectUI.py:2478
+#: appGUI/ObjectUI.py:2494
msgid "Save Probing GCode"
msgstr "Dengeleme G-Kod'unu Kaydet"
-#: appGUI/ObjectUI.py:2480
+#: appGUI/ObjectUI.py:2496
msgid "Will save the probing GCode."
msgstr "Prob (algılayıcı) G-Kod'unu kaydeder."
-#: appGUI/ObjectUI.py:2489
+#: appGUI/ObjectUI.py:2505
msgid "View/Edit the probing GCode."
msgstr "Dengeleme G-Kod'unu görüntüleyin/düzenleyin."
-#: appGUI/ObjectUI.py:2496 appObjects/FlatCAMCNCJob.py:1726
+#: appGUI/ObjectUI.py:2512 appObjects/FlatCAMCNCJob.py:1726
#: appObjects/FlatCAMCNCJob.py:1730
msgid "Import Height Map"
msgstr "Yükseklik Haritasını İçe Aktar"
-#: appGUI/ObjectUI.py:2498
+#: appGUI/ObjectUI.py:2514
msgid ""
"Import the file that has the Z heights\n"
"obtained through probing and then apply this data\n"
@@ -7883,11 +7883,11 @@ msgstr ""
"içe aktarın ve ardından bu verileri orijinal G-Kod üzerine \n"
"uygulayın, böylece otomatik dengeleme yapın."
-#: appGUI/ObjectUI.py:2516
+#: appGUI/ObjectUI.py:2532
msgid "Export CNC Code"
msgstr "CNC Kodunu Dışa Aktar"
-#: appGUI/ObjectUI.py:2518
+#: appGUI/ObjectUI.py:2534
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
msgid ""
@@ -7897,11 +7897,11 @@ msgstr ""
"Bu nesneyi bir dosyaya kaydetmek \n"
"için G-Kod'u dışa aktarın."
-#: appGUI/ObjectUI.py:2527
+#: appGUI/ObjectUI.py:2543
msgid "Save CNC Code"
msgstr "CNC Kodunu Kaydet"
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2546
msgid ""
"Opens dialog to save G-Code\n"
"file."
@@ -7909,86 +7909,86 @@ msgstr ""
"G-Kod dosyasını kaydetmek için bir\n"
"iletişim kutusu açar."
-#: appGUI/ObjectUI.py:2537
+#: appGUI/ObjectUI.py:2553
msgid "Review CNC Code."
msgstr "CNC kodunu kontrol edin."
-#: appGUI/ObjectUI.py:2598
+#: appGUI/ObjectUI.py:2614
msgid "Script Object"
msgstr "Komut Dosyası Nesnesi"
-#: appGUI/ObjectUI.py:2618 appGUI/ObjectUI.py:2692
+#: appGUI/ObjectUI.py:2634 appGUI/ObjectUI.py:2708
msgid "Auto Completer"
msgstr "Otomatik Tamamlayıcı"
-#: appGUI/ObjectUI.py:2620
+#: appGUI/ObjectUI.py:2636
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr ""
"Bu seçenek, Kod Düzenleyi'de otomatik \n"
"tamamlamanın etkin olup olmadığını seçer."
-#: appGUI/ObjectUI.py:2665
+#: appGUI/ObjectUI.py:2681
msgid "Document Object"
msgstr "Belge Nesnesi"
-#: appGUI/ObjectUI.py:2694
+#: appGUI/ObjectUI.py:2710
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr ""
"Bu seçenek, Belge Düzenleyici'de otomatik tamamlamanın\n"
"etkin olup olmadığını seçer."
-#: appGUI/ObjectUI.py:2712
+#: appGUI/ObjectUI.py:2728
msgid "Font Type"
msgstr "Yazı Tipi"
-#: appGUI/ObjectUI.py:2729
+#: appGUI/ObjectUI.py:2745
#: appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
msgid "Font Size"
msgstr "Yazı Boyutu"
-#: appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2781
msgid "Alignment"
msgstr "Hizala"
-#: appGUI/ObjectUI.py:2770
+#: appGUI/ObjectUI.py:2786
msgid "Align Left"
msgstr "Sola Hizala"
-#: appGUI/ObjectUI.py:2775 app_Main.py:4993
+#: appGUI/ObjectUI.py:2791 app_Main.py:4993
msgid "Center"
msgstr "Ortala"
-#: appGUI/ObjectUI.py:2780
+#: appGUI/ObjectUI.py:2796
msgid "Align Right"
msgstr "Sağa Hizala"
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2801
msgid "Justify"
msgstr "Yasla"
-#: appGUI/ObjectUI.py:2792
+#: appGUI/ObjectUI.py:2808
msgid "Font Color"
msgstr "Yazı Rengi"
-#: appGUI/ObjectUI.py:2794
+#: appGUI/ObjectUI.py:2810
msgid "Set the font color for the selected text"
msgstr "Seçilen metnin yazı tipi rengini ayarlar"
-#: appGUI/ObjectUI.py:2808
+#: appGUI/ObjectUI.py:2824
msgid "Selection Color"
msgstr "Vurgu Rengi"
-#: appGUI/ObjectUI.py:2810
+#: appGUI/ObjectUI.py:2826
msgid "Set the selection color when doing text selection."
msgstr ""
"Metin seçimi yaparken seçili metinleri\n"
"belirlemek için vurgu rengini belirleyin."
-#: appGUI/ObjectUI.py:2824
+#: appGUI/ObjectUI.py:2840
msgid "Tab Size"
msgstr "Sekme Boyutu"
-#: appGUI/ObjectUI.py:2826
+#: appGUI/ObjectUI.py:2842
msgid "Set the tab size. In pixels. Default value is 80 pixels."
msgstr ""
"Sekme boyutunu ayarlayın. Piksel cinsinden.\n"
diff --git a/locale_template/strings.pot b/locale_template/strings.pot
index 937b82ec..94e2236e 100644
--- a/locale_template/strings.pot
+++ b/locale_template/strings.pot
@@ -6,7 +6,7 @@
msgid ""
msgstr ""
"Project-Id-Version: \n"
-"POT-Creation-Date: 2020-10-21 11:55+0300\n"
+"POT-Creation-Date: 2020-10-21 12:14+0300\n"
"PO-Revision-Date: 2019-03-25 15:08+0200\n"
"Last-Translator: \n"
"Language-Team: \n"
@@ -259,14 +259,14 @@ msgid "Tool Name"
msgstr ""
#: appDatabase.py:161 appDatabase.py:837 appEditors/AppExcEditor.py:3765
-#: appGUI/ObjectUI.py:1026 appGUI/ObjectUI.py:1594
+#: appGUI/ObjectUI.py:1038 appGUI/ObjectUI.py:1606
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:132 appTools/ToolCutOut.py:2058
#: appTools/ToolIsolation.py:3091 appTools/ToolNCC.py:3859 appTools/ToolNCC.py:3870
#: appTools/ToolPaint.py:2882
msgid "Tool Dia"
msgstr ""
-#: appDatabase.py:162 appDatabase.py:839 appDatabase.py:1273 appGUI/ObjectUI.py:1001
+#: appDatabase.py:162 appDatabase.py:839 appDatabase.py:1273 appGUI/ObjectUI.py:1013
msgid "Tool Offset"
msgstr ""
@@ -287,7 +287,7 @@ msgid "Tool Shape"
msgstr ""
#: appDatabase.py:166 appDatabase.py:848 appDatabase.py:1309 appDatabase.py:1834
-#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:1157 appGUI/ObjectUI.py:1946
+#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:1169 appGUI/ObjectUI.py:1962
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:49
#: appGUI/preferences/tools/ToolsCalculatorsPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:58
@@ -317,7 +317,7 @@ msgid "V-Angle"
msgstr ""
#: appDatabase.py:171 appDatabase.py:858 appDatabase.py:1350 appDatabase.py:1903
-#: appGUI/ObjectUI.py:1204 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:198
+#: appGUI/ObjectUI.py:1216 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:198
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:102
#: appGUI/preferences/tools/Tools2CalPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:98 appObjects/FlatCAMGeometry.py:1811
@@ -344,7 +344,7 @@ msgid "Spindle Speed"
msgstr ""
#: appDatabase.py:176 appDatabase.py:868 appDatabase.py:1467 appDatabase.py:1984
-#: appGUI/ObjectUI.py:1311 appTools/ToolDrilling.py:2264 appTools/ToolMilling.py:1957
+#: appGUI/ObjectUI.py:1323 appTools/ToolDrilling.py:2264 appTools/ToolMilling.py:1957
msgid "Dwell"
msgstr ""
@@ -352,7 +352,7 @@ msgstr ""
msgid "Dwelltime"
msgstr ""
-#: appDatabase.py:178 appDatabase.py:872 appGUI/ObjectUI.py:1470
+#: appDatabase.py:178 appDatabase.py:872 appGUI/ObjectUI.py:1482
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:221
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:237 appTools/ToolDrilling.py:2498
@@ -693,14 +693,14 @@ msgid "Cutout Parameters"
msgstr ""
#: appDatabase.py:1124 appEditors/AppGeoEditor.py:3287 appGUI/ObjectUI.py:219
-#: appGUI/ObjectUI.py:540 appGUI/ObjectUI.py:842 appGUI/ObjectUI.py:1807
-#: appGUI/ObjectUI.py:2608 appGUI/ObjectUI.py:2675 appTools/ToolCalibration.py:929
+#: appGUI/ObjectUI.py:544 appGUI/ObjectUI.py:850 appGUI/ObjectUI.py:1819
+#: appGUI/ObjectUI.py:2624 appGUI/ObjectUI.py:2691 appTools/ToolCalibration.py:929
#: appTools/ToolFiducials.py:681
msgid "Name"
msgstr ""
#: appDatabase.py:1137 appEditors/AppExcEditor.py:2567 appEditors/AppExcEditor.py:3732
-#: appGUI/ObjectUI.py:632 appObjects/FlatCAMExcellon.py:900
+#: appGUI/ObjectUI.py:640 appObjects/FlatCAMExcellon.py:900
#: appObjects/FlatCAMExcellon.py:1000 appObjects/FlatCAMObj.py:716
#: appObjects/FlatCAMObj.py:779 appTools/ToolDrilling.py:1762 appTools/ToolDrilling.py:1827
#: appTools/ToolDrilling.py:2065 appTools/ToolIsolation.py:3022 appTools/ToolMilling.py:1071
@@ -791,7 +791,7 @@ msgstr ""
msgid "Shape"
msgstr ""
-#: appDatabase.py:1403 appGUI/ObjectUI.py:1223
+#: appDatabase.py:1403 appGUI/ObjectUI.py:1235
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:186
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:148 appTools/ToolMilling.py:1860
#: appTools/ToolSolderPaste.py:1325
@@ -804,7 +804,7 @@ msgid ""
"The speed on XY plane used while cutting into material."
msgstr ""
-#: appDatabase.py:1417 appDatabase.py:1929 appGUI/ObjectUI.py:1237
+#: appDatabase.py:1417 appDatabase.py:1929 appGUI/ObjectUI.py:1249
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:201
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:171
#: appGUI/preferences/tools/ToolsSolderpastePrefGroupUI.py:161 appTools/ToolDrilling.py:2210
@@ -869,7 +869,7 @@ msgid "Conventional"
msgstr ""
#: appDatabase.py:1542 appDatabase.py:1651 appDatabase.py:1753 appDatabase.py:2027
-#: appEditors/AppGeoEditor.py:450 appGUI/ObjectUI.py:1621
+#: appEditors/AppGeoEditor.py:450 appGUI/ObjectUI.py:1633
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:250
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:167
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:182
@@ -918,7 +918,7 @@ msgid "Bounding box margin."
msgstr ""
#: appDatabase.py:1576 appDatabase.py:1687 appEditors/AppGeoEditor.py:484
-#: appGUI/ObjectUI.py:1636 appGUI/ObjectUI.py:2099
+#: appGUI/ObjectUI.py:1648 appGUI/ObjectUI.py:2115
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:85
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:105
#: appGUI/preferences/tools/Tools2PunchGerberPrefGroupUI.py:106
@@ -938,7 +938,7 @@ msgid ""
msgstr ""
#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
-#: appGUI/ObjectUI.py:1646 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
+#: appGUI/ObjectUI.py:1658 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217 appTools/ToolNCC.py:1916
#: appTools/ToolNCC.py:4020 appTools/ToolPaint.py:1456 appTools/ToolPaint.py:3016
#: defaults.py:346 tclCommands/TclCommandCopperClear.py:126
@@ -947,7 +947,7 @@ msgid "Standard"
msgstr ""
#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
-#: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113 appGUI/ObjectUI.py:1646
+#: appEditors/AppGeoEditor.py:568 appEditors/AppGeoEditor.py:5113 appGUI/ObjectUI.py:1658
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217 appTools/ToolNCC.py:1927
#: appTools/ToolNCC.py:4020 appTools/ToolPaint.py:1470 appTools/ToolPaint.py:3016
@@ -957,7 +957,7 @@ msgid "Seed"
msgstr ""
#: appDatabase.py:1586 appDatabase.py:1701 appEditors/AppGeoEditor.py:498
-#: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1646
+#: appEditors/AppGeoEditor.py:5117 appGUI/ObjectUI.py:1658
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:230
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:217 appTools/ToolNCC.py:1938
#: appTools/ToolNCC.py:4020 appTools/ToolPaint.py:160 appTools/ToolPaint.py:1484
@@ -974,7 +974,7 @@ msgstr ""
msgid "Combo"
msgstr ""
-#: appDatabase.py:1594 appDatabase.py:1712 appGUI/ObjectUI.py:2184 appGUI/ObjectUI.py:2207
+#: appDatabase.py:1594 appDatabase.py:1712 appGUI/ObjectUI.py:2200 appGUI/ObjectUI.py:2223
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:237
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:224 appObjects/FlatCAMCNCJob.py:1291
#: appObjects/FlatCAMCNCJob.py:1313 appTools/ToolNCC.py:4041 appTools/ToolNCC.py:4144
@@ -1009,7 +1009,7 @@ msgstr ""
#: appDatabase.py:1614 appDatabase.py:1672 appEditors/AppGeoEditor.py:611
#: appEditors/AppGerberEditor.py:5321 appEditors/appGCodeEditor.py:692
-#: appGUI/ObjectUI.py:143 appGUI/ObjectUI.py:943 appGUI/ObjectUI.py:1936
+#: appGUI/ObjectUI.py:143 appGUI/ObjectUI.py:955 appGUI/ObjectUI.py:1952
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:255
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:183
#: appTools/ToolEtchCompensation.py:417 appTools/ToolEtchCompensation.py:425
@@ -1080,7 +1080,7 @@ msgid ""
"number (integer) of tool widths."
msgstr ""
-#: appDatabase.py:1755 appGUI/ObjectUI.py:1623
+#: appDatabase.py:1755 appGUI/ObjectUI.py:1635
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:169 appTools/ToolIsolation.py:3191
msgid "How much (percentage) of the tool width to overlap each tool pass."
msgstr ""
@@ -1154,7 +1154,7 @@ msgid ""
"The value here can compensate the Cut Z parameter."
msgstr ""
-#: appDatabase.py:1874 appGUI/ObjectUI.py:1181
+#: appDatabase.py:1874 appGUI/ObjectUI.py:1193
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:82
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:80 appTools/ToolCutOut.py:2126
@@ -1166,7 +1166,7 @@ msgid ""
"reached."
msgstr ""
-#: appDatabase.py:1896 appGUI/ObjectUI.py:1195
+#: appDatabase.py:1896 appGUI/ObjectUI.py:1207
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:94
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:92 appTools/ToolCutOut.py:2140
#: appTools/ToolDrilling.py:2180 appTools/ToolMilling.py:1830
@@ -1189,7 +1189,7 @@ msgid ""
"This is for linear move G01."
msgstr ""
-#: appDatabase.py:1946 appGUI/ObjectUI.py:1252
+#: appDatabase.py:1946 appGUI/ObjectUI.py:1264
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:67
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:317 appTools/ToolDrilling.py:2227
#: appTools/ToolMilling.py:1892
@@ -1206,7 +1206,7 @@ msgid ""
"ignore for any other cases."
msgstr ""
-#: appDatabase.py:1969 appGUI/ObjectUI.py:1295
+#: appDatabase.py:1969 appGUI/ObjectUI.py:1307
#: appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:217
#: appObjects/FlatCAMGeometry.py:1827 appTools/ToolDrilling.py:1310
#: appTools/ToolDrilling.py:2249 appTools/ToolMilling.py:1307 appTools/ToolMilling.py:1942
@@ -1640,7 +1640,7 @@ msgstr ""
msgid "Click on the circular array Center position"
msgstr ""
-#: appEditors/AppExcEditor.py:3705 appGUI/ObjectUI.py:549
+#: appEditors/AppExcEditor.py:3705 appGUI/ObjectUI.py:553
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:26
msgid "Excellon Editor"
msgstr ""
@@ -1650,13 +1650,13 @@ msgstr ""
msgid "Name:"
msgstr ""
-#: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:586 appGUI/ObjectUI.py:911
+#: appEditors/AppExcEditor.py:3718 appGUI/ObjectUI.py:594 appGUI/ObjectUI.py:923
#: appTools/ToolIsolation.py:3010 appTools/ToolNCC.py:3766 appTools/ToolPaint.py:2800
#: appTools/ToolSolderPaste.py:1155
msgid "Tools Table"
msgstr ""
-#: appEditors/AppExcEditor.py:3720 appGUI/ObjectUI.py:588
+#: appEditors/AppExcEditor.py:3720 appGUI/ObjectUI.py:596
msgid ""
"Tools in this Excellon object\n"
"when are used for drilling."
@@ -1680,7 +1680,7 @@ msgid ""
"for this Excellon object."
msgstr ""
-#: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1028
+#: appEditors/AppExcEditor.py:3767 appGUI/ObjectUI.py:1040
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:57
#: appTools/ToolIsolation.py:3093 appTools/ToolNCC.py:3861
msgid "Diameter for the new tool"
@@ -1988,7 +1988,7 @@ msgstr ""
msgid "Round"
msgstr ""
-#: appEditors/AppGeoEditor.py:94 appEditors/AppGerberEditor.py:2639 appGUI/ObjectUI.py:1558
+#: appEditors/AppGeoEditor.py:94 appEditors/AppGerberEditor.py:2639 appGUI/ObjectUI.py:1570
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:225
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:68
#: appGUI/preferences/tools/Tools2EDrillsPrefGroupUI.py:175
@@ -2046,7 +2046,7 @@ msgid "Text Tool"
msgstr ""
#: appEditors/AppGeoEditor.py:404 appGUI/MainGUI.py:511 appGUI/MainGUI.py:1245
-#: appGUI/ObjectUI.py:1116 appObjects/FlatCAMExcellon.py:878
+#: appGUI/ObjectUI.py:1128 appObjects/FlatCAMExcellon.py:878
#: appObjects/FlatCAMGeometry.py:950 appTools/ToolDrilling.py:711
#: appTools/ToolDrilling.py:1033 appTools/ToolDrilling.py:2116 appTools/ToolIsolation.py:697
#: appTools/ToolIsolation.py:3166 appTools/ToolMilling.py:790 appTools/ToolMilling.py:1046
@@ -2080,7 +2080,7 @@ msgid "Contour:"
msgstr ""
#: appEditors/AppGeoEditor.py:546 appGUI/MainGUI.py:935 appGUI/MainGUI.py:2090
-#: appGUI/ObjectUI.py:1711 appTools/ToolPaint.py:228 appTools/ToolPaint.py:2730
+#: appGUI/ObjectUI.py:1723 appTools/ToolPaint.py:228 appTools/ToolPaint.py:2730
msgid "Paint Tool"
msgstr ""
@@ -2199,7 +2199,7 @@ msgid "A point of reference in format X,Y."
msgstr ""
#: appEditors/AppGeoEditor.py:668 appEditors/AppGerberEditor.py:2590
-#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2265 appTools/ToolDblSided.py:713
+#: appEditors/AppGerberEditor.py:5378 appGUI/ObjectUI.py:2281 appTools/ToolDblSided.py:713
#: appTools/ToolDblSided.py:901 appTools/ToolNCC.py:63 appTools/ToolPaint.py:137
#: appTools/ToolSolderPaste.py:160 appTools/ToolSolderPaste.py:1203
#: appTools/ToolTransform.py:572 app_Main.py:6121
@@ -2383,8 +2383,8 @@ msgstr ""
msgid "Offset Y"
msgstr ""
-#: appEditors/AppGeoEditor.py:920 appEditors/AppGerberEditor.py:5630 appGUI/ObjectUI.py:432
-#: appGUI/ObjectUI.py:469 appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142
+#: appEditors/AppGeoEditor.py:920 appEditors/AppGerberEditor.py:5630 appGUI/ObjectUI.py:436
+#: appGUI/ObjectUI.py:473 appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:142
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:216 appTools/ToolQRCode.py:787
#: appTools/ToolTransform.py:854
msgid "Rounded"
@@ -2449,7 +2449,7 @@ msgid ""
msgstr ""
#: appEditors/AppGeoEditor.py:1043 appEditors/AppGerberEditor.py:5753
-#: appGUI/ObjectUI.py:1512 appGUI/preferences/tools/Tools2CalPrefGroupUI.py:48
+#: appGUI/ObjectUI.py:1524 appGUI/preferences/tools/Tools2CalPrefGroupUI.py:48
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:54
#: appGUI/preferences/tools/ToolsTransformPrefGroupUI.py:70 appTools/ToolCalibration.py:881
#: appTools/ToolDrilling.py:2540 appTools/ToolFilm.py:931 appTools/ToolMilling.py:2218
@@ -2831,14 +2831,14 @@ msgstr ""
msgid "Shape transformations ..."
msgstr ""
-#: appEditors/AppGeoEditor.py:3281 appGUI/ObjectUI.py:849
+#: appEditors/AppGeoEditor.py:3281 appGUI/ObjectUI.py:857
#: appGUI/preferences/geometry/GeometryEditorPrefGroupUI.py:27
msgid "Geometry Editor"
msgstr ""
#: appEditors/AppGeoEditor.py:3287 appEditors/AppGerberEditor.py:2495
#: appEditors/AppGerberEditor.py:3968 appEditors/appGCodeEditor.py:692
-#: appGUI/ObjectUI.py:312 appGUI/ObjectUI.py:943 appGUI/ObjectUI.py:1936
+#: appGUI/ObjectUI.py:316 appGUI/ObjectUI.py:955 appGUI/ObjectUI.py:1952
#: appTools/ToolCutOut.py:2011 appTools/ToolDblSided.py:519 appTools/ToolTransform.py:579
msgid "Type"
msgstr ""
@@ -2851,7 +2851,7 @@ msgstr ""
msgid "Line"
msgstr ""
-#: appEditors/AppGeoEditor.py:3561 appGUI/MainGUI.py:1496 appGUI/ObjectUI.py:1559
+#: appEditors/AppGeoEditor.py:3561 appGUI/MainGUI.py:1496 appGUI/ObjectUI.py:1571
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:226
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:309
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:328
@@ -3084,22 +3084,22 @@ msgstr ""
msgid "Gerber Editor"
msgstr ""
-#: appEditors/AppGerberEditor.py:2482 appGUI/ObjectUI.py:277 appObjects/FlatCAMObj.py:492
+#: appEditors/AppGerberEditor.py:2482 appGUI/ObjectUI.py:281 appObjects/FlatCAMObj.py:492
#: appTools/ToolProperties.py:162
msgid "Apertures"
msgstr ""
-#: appEditors/AppGerberEditor.py:2484 appGUI/ObjectUI.py:279
+#: appEditors/AppGerberEditor.py:2484 appGUI/ObjectUI.py:283
msgid "Apertures Table for the Gerber Object."
msgstr ""
#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:312
+#: appGUI/ObjectUI.py:316
msgid "Code"
msgstr ""
#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:312 appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
+#: appGUI/ObjectUI.py:316 appGUI/preferences/general/GeneralAPPSetGroupUI.py:103
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:167
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:196
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:43
@@ -3109,28 +3109,28 @@ msgid "Size"
msgstr ""
#: appEditors/AppGerberEditor.py:2495 appEditors/AppGerberEditor.py:3968
-#: appGUI/ObjectUI.py:312
+#: appGUI/ObjectUI.py:316
msgid "Dim"
msgstr ""
-#: appEditors/AppGerberEditor.py:2500 appGUI/ObjectUI.py:316
+#: appEditors/AppGerberEditor.py:2500 appGUI/ObjectUI.py:320
msgid "Index"
msgstr ""
#: appEditors/AppGerberEditor.py:2502 appEditors/AppGerberEditor.py:2531
-#: appGUI/ObjectUI.py:318
+#: appGUI/ObjectUI.py:322
msgid "Aperture Code"
msgstr ""
-#: appEditors/AppGerberEditor.py:2504 appGUI/ObjectUI.py:320
+#: appEditors/AppGerberEditor.py:2504 appGUI/ObjectUI.py:324
msgid "Type of aperture: circular, rectangle, macros etc"
msgstr ""
-#: appEditors/AppGerberEditor.py:2506 appGUI/ObjectUI.py:322
+#: appEditors/AppGerberEditor.py:2506 appGUI/ObjectUI.py:326
msgid "Aperture Size:"
msgstr ""
-#: appEditors/AppGerberEditor.py:2508 appGUI/ObjectUI.py:324
+#: appEditors/AppGerberEditor.py:2508 appGUI/ObjectUI.py:328
msgid ""
"Aperture Dimensions:\n"
" - (width, height) for R, O type.\n"
@@ -3192,7 +3192,7 @@ msgstr ""
#: appEditors/AppGerberEditor.py:2595 appEditors/AppGerberEditor.py:2743
#: appGUI/MainGUI.py:757 appGUI/MainGUI.py:1093 appGUI/MainGUI.py:1577
-#: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1076
+#: appGUI/MainGUI.py:2247 appGUI/MainGUI.py:4683 appGUI/ObjectUI.py:1088
#: appObjects/FlatCAMGeometry.py:560 appTools/ToolIsolation.py:70
#: appTools/ToolIsolation.py:3150 appTools/ToolNCC.py:69 appTools/ToolNCC.py:3917
#: appTools/ToolPaint.py:143 appTools/ToolPaint.py:2926 appTools/ToolSolderPaste.py:163
@@ -3520,7 +3520,7 @@ msgstr ""
msgid "String to replace the one in the Find box throughout the text."
msgstr ""
-#: appEditors/AppTextEditor.py:101 appGUI/GUIElements.py:3508 appGUI/ObjectUI.py:1795
+#: appEditors/AppTextEditor.py:101 appGUI/GUIElements.py:3508 appGUI/ObjectUI.py:1807
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:61
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:295
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:280 appTools/ToolIsolation.py:808
@@ -3619,30 +3619,30 @@ msgstr ""
msgid "Loaded Machine Code into Code Editor"
msgstr ""
-#: appEditors/appGCodeEditor.py:667 appGUI/ObjectUI.py:1815
+#: appEditors/appGCodeEditor.py:667 appGUI/ObjectUI.py:1827
msgid "GCode Editor"
msgstr ""
-#: appEditors/appGCodeEditor.py:692 appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:943
-#: appGUI/ObjectUI.py:1936 appGUI/ObjectUI.py:1946
+#: appEditors/appGCodeEditor.py:692 appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:955
+#: appGUI/ObjectUI.py:1952 appGUI/ObjectUI.py:1962
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:138
#: appTools/ToolCopperThieving.py:1314
msgid "Dia"
msgstr ""
-#: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:943 appGUI/ObjectUI.py:1936
+#: appEditors/appGCodeEditor.py:692 appGUI/ObjectUI.py:955 appGUI/ObjectUI.py:1952
#: appTools/ToolIsolation.py:3022 appTools/ToolNCC.py:3778 appTools/ToolPaint.py:2813
msgid "TT"
msgstr ""
-#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:632 appGUI/ObjectUI.py:1946
+#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:640 appGUI/ObjectUI.py:1962
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:71 appObjects/FlatCAMObj.py:499
#: appTools/ToolDrilling.py:2065 appTools/ToolMilling.py:1670 appTools/ToolMilling.py:1769
#: appTools/ToolProperties.py:169
msgid "Drills"
msgstr ""
-#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:632 appGUI/ObjectUI.py:1946
+#: appEditors/appGCodeEditor.py:703 appGUI/ObjectUI.py:640 appGUI/ObjectUI.py:1962
#: appGUI/preferences/excellon/ExcellonEditorPrefGroupUI.py:158
#: appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:72 appObjects/FlatCAMObj.py:501
#: appTools/ToolDrilling.py:2065 appTools/ToolMilling.py:1670 appTools/ToolMilling.py:1770
@@ -4490,7 +4490,7 @@ msgstr ""
#: appGUI/MainGUI.py:755 appGUI/MainGUI.py:874 appGUI/MainGUI.py:1091 appGUI/MainGUI.py:1575
#: appGUI/MainGUI.py:2032 appGUI/MainGUI.py:2245 appGUI/MainGUI.py:4680
-#: appGUI/ObjectUI.py:1069 appObjects/FlatCAMGeometry.py:557 appTools/ToolPanelize.py:325
+#: appGUI/ObjectUI.py:1081 appObjects/FlatCAMGeometry.py:557 appTools/ToolPanelize.py:325
#: appTools/ToolPanelize.py:351 appTools/ToolPanelize.py:448 appTools/ToolPanelize.py:477
#: appTools/ToolPanelize.py:538
msgid "Copy"
@@ -4640,13 +4640,13 @@ msgstr ""
msgid "Extract Drills Tool"
msgstr ""
-#: appGUI/MainGUI.py:931 appGUI/ObjectUI.py:383 appTools/ToolCutOut.py:156
+#: appGUI/MainGUI.py:931 appGUI/ObjectUI.py:387 appTools/ToolCutOut.py:156
#: appTools/ToolCutOut.py:2050
msgid "Cutout Tool"
msgstr ""
-#: appGUI/MainGUI.py:933 appGUI/MainGUI.py:2088 appGUI/ObjectUI.py:368
-#: appGUI/ObjectUI.py:1730 appTools/ToolNCC.py:197
+#: appGUI/MainGUI.py:933 appGUI/MainGUI.py:2088 appGUI/ObjectUI.py:372
+#: appGUI/ObjectUI.py:1742 appTools/ToolNCC.py:197
msgid "NCC Tool"
msgstr ""
@@ -4655,7 +4655,7 @@ msgstr ""
msgid "Isolation Tool"
msgstr ""
-#: appGUI/MainGUI.py:939 appGUI/MainGUI.py:2094 appGUI/ObjectUI.py:687
+#: appGUI/MainGUI.py:939 appGUI/MainGUI.py:2094 appGUI/ObjectUI.py:695
#: appTools/ToolDrilling.py:245 appTools/ToolDrilling.py:1979 appTools/ToolMilling.py:169
msgid "Drilling Tool"
msgstr ""
@@ -4969,8 +4969,8 @@ msgstr ""
msgid "CNC-JOB"
msgstr ""
-#: appGUI/MainGUI.py:1353 appGUI/ObjectUI.py:349 appGUI/ObjectUI.py:683
-#: appGUI/ObjectUI.py:1704
+#: appGUI/MainGUI.py:1353 appGUI/ObjectUI.py:353 appGUI/ObjectUI.py:691
+#: appGUI/ObjectUI.py:1716
msgid "TOOLS"
msgstr ""
@@ -5032,7 +5032,7 @@ msgstr ""
msgid "Toggle Visibility"
msgstr ""
-#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2257
+#: appGUI/MainGUI.py:1461 appGUI/ObjectUI.py:2273
msgid "New"
msgstr ""
@@ -5110,7 +5110,7 @@ msgstr ""
msgid "Subtraction"
msgstr ""
-#: appGUI/MainGUI.py:1518 appGUI/ObjectUI.py:1797
+#: appGUI/MainGUI.py:1518 appGUI/ObjectUI.py:1809
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:63
msgid "Cut"
msgstr ""
@@ -5763,15 +5763,15 @@ msgstr ""
msgid "Gerber Object"
msgstr ""
-#: appGUI/ObjectUI.py:197 appGUI/ObjectUI.py:519 appGUI/ObjectUI.py:825
-#: appGUI/ObjectUI.py:1784 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:30
+#: appGUI/ObjectUI.py:197 appGUI/ObjectUI.py:523 appGUI/ObjectUI.py:833
+#: appGUI/ObjectUI.py:1796 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:30
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:33
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:33
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:31
msgid "Plot Options"
msgstr ""
-#: appGUI/ObjectUI.py:202 appGUI/ObjectUI.py:522
+#: appGUI/ObjectUI.py:202 appGUI/ObjectUI.py:526
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:47
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:45
#: appGUI/preferences/tools/Tools2CThievingPrefGroupUI.py:119
@@ -5783,26 +5783,26 @@ msgstr ""
msgid "Solid color polygons."
msgstr ""
-#: appGUI/ObjectUI.py:209 appGUI/ObjectUI.py:528 appGUI/ObjectUI.py:831
+#: appGUI/ObjectUI.py:209 appGUI/ObjectUI.py:532 appGUI/ObjectUI.py:839
msgid "Multi-Color"
msgstr ""
-#: appGUI/ObjectUI.py:211 appGUI/ObjectUI.py:530 appGUI/ObjectUI.py:833
+#: appGUI/ObjectUI.py:211 appGUI/ObjectUI.py:534 appGUI/ObjectUI.py:841
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:56
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:49
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:54
msgid "Draw polygons in different colors."
msgstr ""
-#: appGUI/ObjectUI.py:226 appGUI/ObjectUI.py:600
+#: appGUI/ObjectUI.py:226 appGUI/ObjectUI.py:608
#: appGUI/preferences/excellon/ExcellonGenPrefGroupUI.py:40
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:40
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:38
msgid "Plot"
msgstr ""
-#: appGUI/ObjectUI.py:227 appGUI/ObjectUI.py:602 appGUI/ObjectUI.py:932
-#: appGUI/ObjectUI.py:1925 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:41
+#: appGUI/ObjectUI.py:227 appGUI/ObjectUI.py:610 appGUI/ObjectUI.py:944
+#: appGUI/ObjectUI.py:1941 appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:41
#: appGUI/preferences/geometry/GeometryGenPrefGroupUI.py:42
#: appGUI/preferences/gerber/GerberGenPrefGroupUI.py:40
msgid "Plot (show) this object."
@@ -5812,42 +5812,42 @@ msgstr ""
msgid "Edit an Gerber object."
msgstr ""
-#: appGUI/ObjectUI.py:255 appGUI/ObjectUI.py:564 appGUI/ObjectUI.py:864
-#: appGUI/ObjectUI.py:1830
+#: appGUI/ObjectUI.py:255 appGUI/ObjectUI.py:568 appGUI/ObjectUI.py:872
+#: appGUI/ObjectUI.py:1842
msgid "PROPERTIES"
msgstr ""
-#: appGUI/ObjectUI.py:256 appGUI/ObjectUI.py:565 appGUI/ObjectUI.py:865
-#: appGUI/ObjectUI.py:1831
+#: appGUI/ObjectUI.py:257 appGUI/ObjectUI.py:570 appGUI/ObjectUI.py:874
+#: appGUI/ObjectUI.py:1844
msgid "Show the Properties."
msgstr ""
-#: appGUI/ObjectUI.py:287 appGUI/ObjectUI.py:595
+#: appGUI/ObjectUI.py:291 appGUI/ObjectUI.py:603
#: appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:50
#: appGUI/preferences/gerber/GerberAdvOptPrefGroupUI.py:54
msgid "Toggle the display of the Tools Table."
msgstr ""
-#: appGUI/ObjectUI.py:296
+#: appGUI/ObjectUI.py:300
msgid "Mark All"
msgstr ""
-#: appGUI/ObjectUI.py:298
+#: appGUI/ObjectUI.py:302
msgid ""
"When checked it will display all the apertures.\n"
"When unchecked, it will delete all mark shapes\n"
"that are drawn on canvas."
msgstr ""
-#: appGUI/ObjectUI.py:328
+#: appGUI/ObjectUI.py:332
msgid "Mark the aperture instances on canvas."
msgstr ""
-#: appGUI/ObjectUI.py:335 appTools/ToolIsolation.py:3465
+#: appGUI/ObjectUI.py:339 appTools/ToolIsolation.py:3465
msgid "Buffer Solid Geometry"
msgstr ""
-#: appGUI/ObjectUI.py:337 appTools/ToolIsolation.py:3467
+#: appGUI/ObjectUI.py:341 appTools/ToolIsolation.py:3467
msgid ""
"This button is shown only when the Gerber file\n"
"is loaded without buffering.\n"
@@ -5855,34 +5855,34 @@ msgid ""
"required for isolation."
msgstr ""
-#: appGUI/ObjectUI.py:353
+#: appGUI/ObjectUI.py:357
msgid "Isolation Routing"
msgstr ""
-#: appGUI/ObjectUI.py:356 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:32
+#: appGUI/ObjectUI.py:360 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:32
#: appTools/ToolIsolation.py:2965
msgid ""
"Create a Geometry object with\n"
"toolpaths to cut around polygons."
msgstr ""
-#: appGUI/ObjectUI.py:371 appGUI/ObjectUI.py:1733 appTools/ToolNCC.py:4258
+#: appGUI/ObjectUI.py:375 appGUI/ObjectUI.py:1745 appTools/ToolNCC.py:4258
msgid ""
"Create the Geometry Object\n"
"for non-copper routing."
msgstr ""
-#: appGUI/ObjectUI.py:386
+#: appGUI/ObjectUI.py:390
msgid ""
"Generate the geometry for\n"
"the board cutout."
msgstr ""
-#: appGUI/ObjectUI.py:403 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:32
+#: appGUI/ObjectUI.py:407 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:32
msgid "Non-copper regions"
msgstr ""
-#: appGUI/ObjectUI.py:405 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:34
+#: appGUI/ObjectUI.py:409 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:34
msgid ""
"Create polygons covering the\n"
"areas without copper on the PCB.\n"
@@ -5891,13 +5891,13 @@ msgid ""
"copper from a specified region."
msgstr ""
-#: appGUI/ObjectUI.py:415 appGUI/ObjectUI.py:456
+#: appGUI/ObjectUI.py:419 appGUI/ObjectUI.py:460
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:46
#: appGUI/preferences/gerber/GerberOptPrefGroupUI.py:79
msgid "Boundary Margin"
msgstr ""
-#: appGUI/ObjectUI.py:417 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48
+#: appGUI/ObjectUI.py:421 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:48
msgid ""
"Specify the edge of the PCB\n"
"by drawing a box around all\n"
@@ -5905,35 +5905,35 @@ msgid ""
"distance."
msgstr ""
-#: appGUI/ObjectUI.py:434 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:63
+#: appGUI/ObjectUI.py:438 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:63
msgid "Resulting geometry will have rounded corners."
msgstr ""
-#: appGUI/ObjectUI.py:437 appGUI/ObjectUI.py:477 appTools/ToolCutOut.py:2285
+#: appGUI/ObjectUI.py:441 appGUI/ObjectUI.py:481 appTools/ToolCutOut.py:2285
#: appTools/ToolCutOut.py:2300 appTools/ToolIsolation.py:3444 appTools/ToolNCC.py:4255
#: appTools/ToolPaint.py:3178
msgid "Generate Geometry"
msgstr ""
-#: appGUI/ObjectUI.py:448 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:73
+#: appGUI/ObjectUI.py:452 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:73
#: appGUI/preferences/tools/Tools2QRCodePrefGroupUI.py:137 appTools/ToolPanelize.py:698
#: appTools/ToolQRCode.py:782
msgid "Bounding Box"
msgstr ""
-#: appGUI/ObjectUI.py:450
+#: appGUI/ObjectUI.py:454
msgid ""
"Create a geometry surrounding the Gerber object.\n"
"Square shape."
msgstr ""
-#: appGUI/ObjectUI.py:458 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:81
+#: appGUI/ObjectUI.py:462 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:81
msgid ""
"Distance of the edges of the box\n"
"to the nearest polygon."
msgstr ""
-#: appGUI/ObjectUI.py:471 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:94
+#: appGUI/ObjectUI.py:475 appGUI/preferences/gerber/GerberOptPrefGroupUI.py:94
msgid ""
"If the bounding box is \n"
"to have rounded corners\n"
@@ -5941,23 +5941,23 @@ msgid ""
"the margin."
msgstr ""
-#: appGUI/ObjectUI.py:480
+#: appGUI/ObjectUI.py:484
msgid "Generate the Geometry object."
msgstr ""
-#: appGUI/ObjectUI.py:507
+#: appGUI/ObjectUI.py:511
msgid "Excellon Object"
msgstr ""
-#: appGUI/ObjectUI.py:524
+#: appGUI/ObjectUI.py:528
msgid "Solid circles."
msgstr ""
-#: appGUI/ObjectUI.py:553
+#: appGUI/ObjectUI.py:557
msgid "Edit an Excellon object."
msgstr ""
-#: appGUI/ObjectUI.py:637 appTools/ToolDrilling.py:2067 appTools/ToolMilling.py:1672
+#: appGUI/ObjectUI.py:645 appTools/ToolDrilling.py:2067 appTools/ToolMilling.py:1672
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
@@ -5966,106 +5966,106 @@ msgid ""
"Here the tools are selected for G-code generation."
msgstr ""
-#: appGUI/ObjectUI.py:642 appGUI/ObjectUI.py:956 appTools/ToolDrilling.py:2072
+#: appGUI/ObjectUI.py:650 appGUI/ObjectUI.py:968 appTools/ToolDrilling.py:2072
#: appTools/ToolMilling.py:1677 appTools/ToolPaint.py:2827
msgid ""
"Tool Diameter. It's value (in current FlatCAM units) \n"
"is the cut width into the material."
msgstr ""
-#: appGUI/ObjectUI.py:645 appTools/ToolDrilling.py:2075 appTools/ToolMilling.py:1680
+#: appGUI/ObjectUI.py:653 appTools/ToolDrilling.py:2075 appTools/ToolMilling.py:1680
msgid ""
"The number of Drill holes. Holes that are drilled with\n"
"a drill bit."
msgstr ""
-#: appGUI/ObjectUI.py:648 appTools/ToolDrilling.py:2078 appTools/ToolMilling.py:1683
+#: appGUI/ObjectUI.py:656 appTools/ToolDrilling.py:2078 appTools/ToolMilling.py:1683
msgid ""
"The number of Slot holes. Holes that are created by\n"
"milling them with an endmill bit."
msgstr ""
-#: appGUI/ObjectUI.py:651
+#: appGUI/ObjectUI.py:659
msgid "Show the color of the drill holes when using multi-color."
msgstr ""
-#: appGUI/ObjectUI.py:653
+#: appGUI/ObjectUI.py:661
msgid ""
"Toggle display of the drills for the current tool.\n"
"This does not select the tools for G-code generation."
msgstr ""
-#: appGUI/ObjectUI.py:662 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:55
+#: appGUI/ObjectUI.py:670 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:55
msgid "Auto load from DB"
msgstr ""
-#: appGUI/ObjectUI.py:664 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:57
+#: appGUI/ObjectUI.py:672 appGUI/preferences/excellon/ExcellonAdvOptPrefGroupUI.py:57
msgid ""
"Automatic replacement of the tools from related application tools\n"
"with tools from DB that have a close diameter value."
msgstr ""
-#: appGUI/ObjectUI.py:690
+#: appGUI/ObjectUI.py:698
msgid "Generate GCode out of drill holes in an Excellon object."
msgstr ""
-#: appGUI/ObjectUI.py:701
+#: appGUI/ObjectUI.py:709
msgid "Milling Tool"
msgstr ""
-#: appGUI/ObjectUI.py:704
+#: appGUI/ObjectUI.py:712
msgid "Generate a Geometry for milling drills or slots in an Excellon object."
msgstr ""
-#: appGUI/ObjectUI.py:730
+#: appGUI/ObjectUI.py:738
msgid "Milling Geometry"
msgstr ""
-#: appGUI/ObjectUI.py:732
+#: appGUI/ObjectUI.py:740
msgid ""
"Create Geometry for milling holes.\n"
"Select from the Tools Table above the hole dias to be\n"
"milled. Use the # column to make the selection."
msgstr ""
-#: appGUI/ObjectUI.py:738 appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:80
+#: appGUI/ObjectUI.py:746 appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:80
#: appTools/ToolMilling.py:1779
msgid "Milling Diameter"
msgstr ""
-#: appGUI/ObjectUI.py:740 appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:101
+#: appGUI/ObjectUI.py:748 appGUI/preferences/excellon/ExcellonOptPrefGroupUI.py:101
msgid "Diameter of the cutting tool."
msgstr ""
-#: appGUI/ObjectUI.py:750
+#: appGUI/ObjectUI.py:758
msgid "Mill Drills"
msgstr ""
-#: appGUI/ObjectUI.py:752
+#: appGUI/ObjectUI.py:760
msgid ""
"Create the Geometry Object\n"
"for milling drills."
msgstr ""
-#: appGUI/ObjectUI.py:770
+#: appGUI/ObjectUI.py:778
msgid "Mill Slots"
msgstr ""
-#: appGUI/ObjectUI.py:772
+#: appGUI/ObjectUI.py:780
msgid ""
"Create the Geometry Object\n"
"for milling slots."
msgstr ""
-#: appGUI/ObjectUI.py:814
+#: appGUI/ObjectUI.py:822
msgid "Geometry Object"
msgstr ""
-#: appGUI/ObjectUI.py:853
+#: appGUI/ObjectUI.py:861
msgid "Edit an Geometry object."
msgstr ""
-#: appGUI/ObjectUI.py:913
+#: appGUI/ObjectUI.py:925
msgid ""
"Tools in this Geometry object used for cutting.\n"
"The 'Offset' entry will set an offset for the cut.\n"
@@ -6081,19 +6081,19 @@ msgid ""
"showed UI form entries named V-Tip Dia and V-Tip Angle."
msgstr ""
-#: appGUI/ObjectUI.py:930 appGUI/ObjectUI.py:1923
+#: appGUI/ObjectUI.py:942 appGUI/ObjectUI.py:1939
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:40
msgid "Plot Object"
msgstr ""
-#: appGUI/ObjectUI.py:950
+#: appGUI/ObjectUI.py:962
msgid ""
"This is the Tool Number.\n"
"When ToolChange is checked, on toolchange event this value\n"
"will be showed as a T1, T2 ... Tn"
msgstr ""
-#: appGUI/ObjectUI.py:961
+#: appGUI/ObjectUI.py:973
msgid ""
"The value for the Offset can be:\n"
"- Path -> There is no offset, the tool cut will be done through the geometry line.\n"
@@ -6101,7 +6101,7 @@ msgid ""
"- Out(side) -> The tool cut will follow the geometry line on the outside."
msgstr ""
-#: appGUI/ObjectUI.py:968
+#: appGUI/ObjectUI.py:980
msgid ""
"The (Operation) Type has only informative value. Usually the UI form values \n"
"are choose based on the operation type and this will serve as a reminder.\n"
@@ -6111,7 +6111,7 @@ msgid ""
"For Isolation we need a lower Feedrate as it use a milling bit with a fine tip."
msgstr ""
-#: appGUI/ObjectUI.py:977
+#: appGUI/ObjectUI.py:989
msgid ""
"The Tool Type (TT) can be:\n"
"- Circular with 1 ... 4 teeth -> it is informative only. Being circular the cut width in "
@@ -6127,7 +6127,7 @@ msgid ""
"Choosing the V-Shape Tool Type automatically will select the Operation Type as Isolation."
msgstr ""
-#: appGUI/ObjectUI.py:989
+#: appGUI/ObjectUI.py:1001
msgid ""
"Plot column. It is visible only for MultiGeo geometries, meaning geometries that holds "
"the geometry\n"
@@ -6138,7 +6138,7 @@ msgid ""
"for the corresponding tool."
msgstr ""
-#: appGUI/ObjectUI.py:1004
+#: appGUI/ObjectUI.py:1016
msgid ""
"The value to offset the cut when \n"
"the Offset type selected is 'Offset'.\n"
@@ -6146,28 +6146,28 @@ msgid ""
"cut and negative for 'inside' cut."
msgstr ""
-#: appGUI/ObjectUI.py:1023 appTools/ToolIsolation.py:3087 appTools/ToolNCC.py:66
+#: appGUI/ObjectUI.py:1035 appTools/ToolIsolation.py:3087 appTools/ToolNCC.py:66
#: appTools/ToolNCC.py:3855 appTools/ToolPaint.py:140 appTools/ToolPaint.py:2878
msgid "Add from DB"
msgstr ""
-#: appGUI/ObjectUI.py:1040 appTools/ToolCutOut.py:2069 appTools/ToolIsolation.py:61
+#: appGUI/ObjectUI.py:1052 appTools/ToolCutOut.py:2069 appTools/ToolIsolation.py:61
#: appTools/ToolIsolation.py:3122 appTools/ToolNCC.py:3889 appTools/ToolPaint.py:2898
msgid "Search and Add"
msgstr ""
-#: appGUI/ObjectUI.py:1043
+#: appGUI/ObjectUI.py:1055
msgid ""
"Add a new tool to the Tool Table\n"
"with the diameter specified above."
msgstr ""
-#: appGUI/ObjectUI.py:1047 appTools/ToolCutOut.py:2081 appTools/ToolIsolation.py:65
+#: appGUI/ObjectUI.py:1059 appTools/ToolCutOut.py:2081 appTools/ToolIsolation.py:65
#: appTools/ToolIsolation.py:3133 appTools/ToolNCC.py:3900 appTools/ToolPaint.py:2909
msgid "Pick from DB"
msgstr ""
-#: appGUI/ObjectUI.py:1050 appTools/ToolCutOut.py:2084 appTools/ToolIsolation.py:3136
+#: appGUI/ObjectUI.py:1062 appTools/ToolCutOut.py:2084 appTools/ToolIsolation.py:3136
#: appTools/ToolNCC.py:3903 appTools/ToolPaint.py:2912
msgid ""
"Add a new tool to the Tool Table\n"
@@ -6176,19 +6176,19 @@ msgid ""
"Menu: Options -> Tools Database"
msgstr ""
-#: appGUI/ObjectUI.py:1072
+#: appGUI/ObjectUI.py:1084
msgid ""
"Copy a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
-#: appGUI/ObjectUI.py:1079
+#: appGUI/ObjectUI.py:1091
msgid ""
"Delete a selection of tools in the Tool Table\n"
"by first selecting a row in the Tool Table."
msgstr ""
-#: appGUI/ObjectUI.py:1116 appObjects/FlatCAMGeometry.py:388
+#: appGUI/ObjectUI.py:1128 appObjects/FlatCAMGeometry.py:388
#: appObjects/FlatCAMGeometry.py:886 appObjects/FlatCAMGeometry.py:891
#: appObjects/FlatCAMGeometry.py:925 appObjects/FlatCAMGeometry.py:950
#: appObjects/FlatCAMGeometry.py:954 appTools/ToolDrilling.py:705
@@ -6208,41 +6208,41 @@ msgstr ""
msgid "Parameters for"
msgstr ""
-#: appGUI/ObjectUI.py:1119 appTools/ToolDrilling.py:2119 appTools/ToolIsolation.py:3169
+#: appGUI/ObjectUI.py:1131 appTools/ToolDrilling.py:2119 appTools/ToolIsolation.py:3169
#: appTools/ToolMilling.py:1714 appTools/ToolNCC.py:3936 appTools/ToolPaint.py:2943
msgid ""
"The data used for creating GCode.\n"
"Each tool store it's own set of such data."
msgstr ""
-#: appGUI/ObjectUI.py:1126 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:89
+#: appGUI/ObjectUI.py:1138 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:89
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:72
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:78
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:85
msgid "V-Tip Dia"
msgstr ""
-#: appGUI/ObjectUI.py:1129 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:91
+#: appGUI/ObjectUI.py:1141 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:74
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:80
msgid "The tip diameter for V-Shape Tool"
msgstr ""
-#: appGUI/ObjectUI.py:1141 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:101
+#: appGUI/ObjectUI.py:1153 appGUI/preferences/tools/ToolsISOPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:84
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:91
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:99
msgid "V-Tip Angle"
msgstr ""
-#: appGUI/ObjectUI.py:1144 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:86
+#: appGUI/ObjectUI.py:1156 appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:86
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:93
msgid ""
"The tip angle for V-Shape Tool.\n"
"In degree."
msgstr ""
-#: appGUI/ObjectUI.py:1160 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:51
+#: appGUI/ObjectUI.py:1172 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:51
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:61 appObjects/FlatCAMGeometry.py:1374
#: appTools/ToolCutOut.py:2105
msgid ""
@@ -6250,34 +6250,34 @@ msgid ""
"below the copper surface."
msgstr ""
-#: appGUI/ObjectUI.py:1178 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:69
+#: appGUI/ObjectUI.py:1190 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:69
#: appGUI/preferences/tools/ToolsCutoutPrefGroupUI.py:79
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:77 appTools/ToolCutOut.py:2123
#: appTools/ToolDrilling.py:2164 appTools/ToolMilling.py:1814
msgid "Multi-Depth"
msgstr ""
-#: appGUI/ObjectUI.py:1206 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:104
+#: appGUI/ObjectUI.py:1218 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:104
msgid ""
"Height of the tool when\n"
"moving without cutting."
msgstr ""
-#: appGUI/ObjectUI.py:1225 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:188
+#: appGUI/ObjectUI.py:1237 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:188
#: appTools/ToolMilling.py:1862
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute"
msgstr ""
-#: appGUI/ObjectUI.py:1239 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:203
+#: appGUI/ObjectUI.py:1251 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:203
msgid ""
"Cutting speed in the XY\n"
"plane in units per minute.\n"
"It is called also Plunge."
msgstr ""
-#: appGUI/ObjectUI.py:1254 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:69
+#: appGUI/ObjectUI.py:1266 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:69
msgid ""
"Cutting speed in the XY plane\n"
"(in units per minute).\n"
@@ -6286,12 +6286,12 @@ msgid ""
"ignore for any other cases."
msgstr ""
-#: appGUI/ObjectUI.py:1272 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:85
+#: appGUI/ObjectUI.py:1284 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:85
#: appTools/ToolMilling.py:1914
msgid "Re-cut"
msgstr ""
-#: appGUI/ObjectUI.py:1274 appGUI/ObjectUI.py:1286
+#: appGUI/ObjectUI.py:1286 appGUI/ObjectUI.py:1298
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:87
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:99 appTools/ToolMilling.py:1916
#: appTools/ToolMilling.py:1929
@@ -6302,14 +6302,14 @@ msgid ""
"extended cut over the first cut section."
msgstr ""
-#: appGUI/ObjectUI.py:1298 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:220
+#: appGUI/ObjectUI.py:1310 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:220
msgid ""
"Speed of the spindle in RPM (optional).\n"
"If LASER preprocessor is used,\n"
"this value is the power of laser."
msgstr ""
-#: appGUI/ObjectUI.py:1314 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:235
+#: appGUI/ObjectUI.py:1326 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:235
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:202 appTools/ToolDrilling.py:2266
#: appTools/ToolMilling.py:1959
msgid ""
@@ -6317,13 +6317,13 @@ msgid ""
"speed before cutting."
msgstr ""
-#: appGUI/ObjectUI.py:1324 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:240
+#: appGUI/ObjectUI.py:1336 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:240
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:210 appTools/ToolDrilling.py:2278
#: appTools/ToolMilling.py:1970
msgid "Number of time units for spindle to dwell."
msgstr ""
-#: appGUI/ObjectUI.py:1332 appGUI/ObjectUI.py:2055
+#: appGUI/ObjectUI.py:1344 appGUI/ObjectUI.py:2071
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:131
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:108
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:333 appTools/ToolDrilling.py:2461
@@ -6331,7 +6331,7 @@ msgstr ""
msgid "Probe Z depth"
msgstr ""
-#: appGUI/ObjectUI.py:1334 appGUI/ObjectUI.py:2057
+#: appGUI/ObjectUI.py:1346 appGUI/ObjectUI.py:2073
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:133
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:110
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:335 appTools/ToolDrilling.py:2463
@@ -6341,13 +6341,13 @@ msgid ""
"to probe. Negative value, in current units."
msgstr ""
-#: appGUI/ObjectUI.py:1349 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:123
+#: appGUI/ObjectUI.py:1361 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:123
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:346 appTools/ToolDrilling.py:2480
#: appTools/ToolMilling.py:2148
msgid "Feedrate Probe"
msgstr ""
-#: appGUI/ObjectUI.py:1351 appGUI/ObjectUI.py:2070
+#: appGUI/ObjectUI.py:1363 appGUI/ObjectUI.py:2086
#: appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:146
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:125
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:348 appTools/ToolDrilling.py:2482
@@ -6355,39 +6355,39 @@ msgstr ""
msgid "The feedrate used while the probe is probing."
msgstr ""
-#: appGUI/ObjectUI.py:1378 appTools/ToolDrilling.py:2364 appTools/ToolIsolation.py:3265
+#: appGUI/ObjectUI.py:1390 appTools/ToolDrilling.py:2364 appTools/ToolIsolation.py:3265
#: appTools/ToolMilling.py:2042 appTools/ToolNCC.py:4094 appTools/ToolPaint.py:3049
msgid "Apply parameters to all tools"
msgstr ""
-#: appGUI/ObjectUI.py:1381 appTools/ToolDrilling.py:2367 appTools/ToolIsolation.py:3268
+#: appGUI/ObjectUI.py:1393 appTools/ToolDrilling.py:2367 appTools/ToolIsolation.py:3268
#: appTools/ToolMilling.py:2045 appTools/ToolNCC.py:4097 appTools/ToolPaint.py:3052
msgid ""
"The parameters in the current form will be applied\n"
"on all the tools from the Tool Table."
msgstr ""
-#: appGUI/ObjectUI.py:1392 appTools/ToolDrilling.py:2378 appTools/ToolIsolation.py:3279
+#: appGUI/ObjectUI.py:1404 appTools/ToolDrilling.py:2378 appTools/ToolIsolation.py:3279
#: appTools/ToolMilling.py:2056 appTools/ToolNCC.py:4108 appTools/ToolPaint.py:3063
msgid "Common Parameters"
msgstr ""
-#: appGUI/ObjectUI.py:1394 appTools/ToolDrilling.py:2380 appTools/ToolIsolation.py:3281
+#: appGUI/ObjectUI.py:1406 appTools/ToolDrilling.py:2380 appTools/ToolIsolation.py:3281
#: appTools/ToolMilling.py:2058 appTools/ToolNCC.py:4110 appTools/ToolPaint.py:3065
msgid "Parameters that are common for all tools."
msgstr ""
-#: appGUI/ObjectUI.py:1399 appTools/ToolDrilling.py:2394 appTools/ToolMilling.py:2063
+#: appGUI/ObjectUI.py:1411 appTools/ToolDrilling.py:2394 appTools/ToolMilling.py:2063
msgid "Tool change Z"
msgstr ""
-#: appGUI/ObjectUI.py:1402 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:125
+#: appGUI/ObjectUI.py:1414 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:125
msgid ""
"Include tool-change sequence\n"
"in the Machine Code (Pause for tool change)."
msgstr ""
-#: appGUI/ObjectUI.py:1410 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:135
+#: appGUI/ObjectUI.py:1422 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:135
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:126 appTools/ToolDrilling.py:2396
#: appTools/ToolMilling.py:2072
msgid ""
@@ -6395,13 +6395,13 @@ msgid ""
"tool change."
msgstr ""
-#: appGUI/ObjectUI.py:1438 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:154
+#: appGUI/ObjectUI.py:1450 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:154
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:142 appTools/ToolDrilling.py:2427
#: appTools/ToolMilling.py:2098
msgid "End move Z"
msgstr ""
-#: appGUI/ObjectUI.py:1440 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:156
+#: appGUI/ObjectUI.py:1452 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:156
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:144 appTools/ToolDrilling.py:2429
#: appTools/ToolMilling.py:2100
msgid ""
@@ -6409,13 +6409,13 @@ msgid ""
"the last move at the end of the job."
msgstr ""
-#: appGUI/ObjectUI.py:1457 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:174
+#: appGUI/ObjectUI.py:1469 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:174
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:159 appTools/ToolDrilling.py:2447
#: appTools/ToolMilling.py:2117
msgid "End move X,Y"
msgstr ""
-#: appGUI/ObjectUI.py:1459 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:176
+#: appGUI/ObjectUI.py:1471 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:176
#: appGUI/preferences/tools/ToolsDrillPrefGroupUI.py:161 appTools/ToolDrilling.py:2449
#: appTools/ToolMilling.py:2119
msgid ""
@@ -6424,21 +6424,21 @@ msgid ""
"on X,Y plane at the end of the job."
msgstr ""
-#: appGUI/ObjectUI.py:1464 appTools/ToolDrilling.py:2454 appTools/ToolMilling.py:2124
+#: appGUI/ObjectUI.py:1476 appTools/ToolDrilling.py:2454 appTools/ToolMilling.py:2124
msgid "X,Y coordinates"
msgstr ""
-#: appGUI/ObjectUI.py:1472 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:257
+#: appGUI/ObjectUI.py:1484 appGUI/preferences/geometry/GeometryOptPrefGroupUI.py:257
msgid ""
"The Preprocessor file that dictates\n"
"the Machine Code (like GCode, RML, HPGL) output."
msgstr ""
-#: appGUI/ObjectUI.py:1488 appTools/ToolDrilling.py:2515 appTools/ToolMilling.py:2194
+#: appGUI/ObjectUI.py:1500 appTools/ToolDrilling.py:2515 appTools/ToolMilling.py:2194
msgid "Add exclusion areas"
msgstr ""
-#: appGUI/ObjectUI.py:1491 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:212
+#: appGUI/ObjectUI.py:1503 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:212
#: appTools/ToolDrilling.py:2518 appTools/ToolMilling.py:2197
msgid ""
"Include exclusion areas.\n"
@@ -6446,39 +6446,39 @@ msgid ""
"is forbidden."
msgstr ""
-#: appGUI/ObjectUI.py:1512 appGUI/ObjectUI.py:1531
+#: appGUI/ObjectUI.py:1524 appGUI/ObjectUI.py:1543
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:232
#: appTools/ToolDrilling.py:2540 appTools/ToolDrilling.py:2559 appTools/ToolMilling.py:2218
#: appTools/ToolMilling.py:2237
msgid "Strategy"
msgstr ""
-#: appGUI/ObjectUI.py:1512 appGUI/ObjectUI.py:1543
+#: appGUI/ObjectUI.py:1524 appGUI/ObjectUI.py:1555
#: appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:244
#: appTools/ToolDrilling.py:2540 appTools/ToolDrilling.py:2572 appTools/ToolMilling.py:2218
#: appTools/ToolMilling.py:2249
msgid "Over Z"
msgstr ""
-#: appGUI/ObjectUI.py:1514 appTools/ToolDrilling.py:2542 appTools/ToolMilling.py:2220
+#: appGUI/ObjectUI.py:1526 appTools/ToolDrilling.py:2542 appTools/ToolMilling.py:2220
msgid "This is the Area ID."
msgstr ""
-#: appGUI/ObjectUI.py:1516 appTools/ToolDrilling.py:2544 appTools/ToolMilling.py:2222
+#: appGUI/ObjectUI.py:1528 appTools/ToolDrilling.py:2544 appTools/ToolMilling.py:2222
msgid "Type of the object where the exclusion area was added."
msgstr ""
-#: appGUI/ObjectUI.py:1518 appTools/ToolDrilling.py:2546 appTools/ToolMilling.py:2224
+#: appGUI/ObjectUI.py:1530 appTools/ToolDrilling.py:2546 appTools/ToolMilling.py:2224
msgid "The strategy used for exclusion area. Go around the exclusion areas or over it."
msgstr ""
-#: appGUI/ObjectUI.py:1520 appTools/ToolDrilling.py:2548 appTools/ToolMilling.py:2226
+#: appGUI/ObjectUI.py:1532 appTools/ToolDrilling.py:2548 appTools/ToolMilling.py:2226
msgid ""
"If the strategy is to go over the area then this is the height at which the tool will go "
"to avoid the exclusion area."
msgstr ""
-#: appGUI/ObjectUI.py:1532 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:233
+#: appGUI/ObjectUI.py:1544 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:233
#: appTools/ToolDrilling.py:2560 appTools/ToolMilling.py:2238
msgid ""
"The strategy followed when encountering an exclusion area.\n"
@@ -6487,32 +6487,32 @@ msgid ""
"- Around -> will avoid the exclusion area by going around the area"
msgstr ""
-#: appGUI/ObjectUI.py:1536 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:237
+#: appGUI/ObjectUI.py:1548 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:237
#: appTools/ToolDrilling.py:2564 appTools/ToolMilling.py:2242
msgid "Over"
msgstr ""
-#: appGUI/ObjectUI.py:1537 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:238
+#: appGUI/ObjectUI.py:1549 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:238
#: appTools/ToolDrilling.py:2565 appTools/ToolMilling.py:2243
msgid "Around"
msgstr ""
-#: appGUI/ObjectUI.py:1544 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:245
+#: appGUI/ObjectUI.py:1556 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:245
#: appTools/ToolDrilling.py:2573 appTools/ToolMilling.py:2250
msgid ""
"The height Z to which the tool will rise in order to avoid\n"
"an interdiction area."
msgstr ""
-#: appGUI/ObjectUI.py:1554 appTools/ToolDrilling.py:2584 appTools/ToolMilling.py:2260
+#: appGUI/ObjectUI.py:1566 appTools/ToolDrilling.py:2584 appTools/ToolMilling.py:2260
msgid "Add area:"
msgstr ""
-#: appGUI/ObjectUI.py:1555 appTools/ToolDrilling.py:2585 appTools/ToolMilling.py:2261
+#: appGUI/ObjectUI.py:1567 appTools/ToolDrilling.py:2585 appTools/ToolMilling.py:2261
msgid "Add an Exclusion Area."
msgstr ""
-#: appGUI/ObjectUI.py:1561 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:222
+#: appGUI/ObjectUI.py:1573 appGUI/preferences/geometry/GeometryAdvOptPrefGroupUI.py:222
#: appGUI/preferences/tools/ToolsISOPrefGroupUI.py:305
#: appGUI/preferences/tools/ToolsNCCPrefGroupUI.py:324
#: appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:288 appTools/ToolDrilling.py:2591
@@ -6521,7 +6521,7 @@ msgstr ""
msgid "The kind of selection shape used for area selection."
msgstr ""
-#: appGUI/ObjectUI.py:1571 appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:32
+#: appGUI/ObjectUI.py:1583 appGUI/preferences/utilities/AutoCompletePrefGroupUI.py:32
#: appGUI/preferences/utilities/FAExcPrefGroupUI.py:42
#: appGUI/preferences/utilities/FAGcoPrefGroupUI.py:32
#: appGUI/preferences/utilities/FAGrbPrefGroupUI.py:32 appTools/ToolDrilling.py:2602
@@ -6529,43 +6529,43 @@ msgstr ""
msgid "Delete All"
msgstr ""
-#: appGUI/ObjectUI.py:1572 appTools/ToolDrilling.py:2603 appTools/ToolMilling.py:2278
+#: appGUI/ObjectUI.py:1584 appTools/ToolDrilling.py:2603 appTools/ToolMilling.py:2278
msgid "Delete all exclusion areas."
msgstr ""
-#: appGUI/ObjectUI.py:1575 appTools/ToolDrilling.py:2606 appTools/ToolMilling.py:2281
+#: appGUI/ObjectUI.py:1587 appTools/ToolDrilling.py:2606 appTools/ToolMilling.py:2281
msgid "Delete Selected"
msgstr ""
-#: appGUI/ObjectUI.py:1576 appTools/ToolDrilling.py:2607 appTools/ToolMilling.py:2282
+#: appGUI/ObjectUI.py:1588 appTools/ToolDrilling.py:2607 appTools/ToolMilling.py:2282
msgid "Delete all exclusion areas that are selected in the table."
msgstr ""
-#: appGUI/ObjectUI.py:1586
+#: appGUI/ObjectUI.py:1598
msgid "Add Polish"
msgstr ""
-#: appGUI/ObjectUI.py:1588
+#: appGUI/ObjectUI.py:1600
msgid ""
"Will add a Paint section at the end of the GCode.\n"
"A metallic brush will clean the material after milling."
msgstr ""
-#: appGUI/ObjectUI.py:1596
+#: appGUI/ObjectUI.py:1608
msgid "Diameter for the polishing tool."
msgstr ""
-#: appGUI/ObjectUI.py:1607
+#: appGUI/ObjectUI.py:1619
msgid "Pressure"
msgstr ""
-#: appGUI/ObjectUI.py:1609
+#: appGUI/ObjectUI.py:1621
msgid ""
"Negative value. The higher the absolute value\n"
"the stronger the pressure of the brush on the material."
msgstr ""
-#: appGUI/ObjectUI.py:1638
+#: appGUI/ObjectUI.py:1650
msgid ""
"Algorithm for polishing:\n"
"- Standard: Fixed step inwards.\n"
@@ -6573,26 +6573,26 @@ msgid ""
"- Line-based: Parallel lines."
msgstr ""
-#: appGUI/ObjectUI.py:1682 appTools/ToolDrilling.py:2629 appTools/ToolMilling.py:2304
+#: appGUI/ObjectUI.py:1694 appTools/ToolDrilling.py:2629 appTools/ToolMilling.py:2304
msgid "Generate CNCJob object"
msgstr ""
-#: appGUI/ObjectUI.py:1685
+#: appGUI/ObjectUI.py:1697
msgid "Generate CNCJob object."
msgstr ""
-#: appGUI/ObjectUI.py:1687
+#: appGUI/ObjectUI.py:1699
msgid ""
"Add / Select at least one tool in the tool-table.\n"
"Click the # header to select all, or Ctrl + LMB\n"
"for custom selection of tools."
msgstr ""
-#: appGUI/ObjectUI.py:1706
+#: appGUI/ObjectUI.py:1718
msgid "Launch Paint Tool in Tools Tab."
msgstr ""
-#: appGUI/ObjectUI.py:1715 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:35
+#: appGUI/ObjectUI.py:1727 appGUI/preferences/tools/ToolsPaintPrefGroupUI.py:35
msgid ""
"Creates tool paths to cover the\n"
"whole area of a polygon (remove\n"
@@ -6600,11 +6600,11 @@ msgid ""
"to click on the desired polygon."
msgstr ""
-#: appGUI/ObjectUI.py:1771
+#: appGUI/ObjectUI.py:1783
msgid "CNC Job Object"
msgstr ""
-#: appGUI/ObjectUI.py:1787 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:54
+#: appGUI/ObjectUI.py:1799 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:54
msgid ""
"This selects the kind of geometries on the canvas to plot.\n"
"Those can be either of type 'Travel' which means the moves\n"
@@ -6612,50 +6612,50 @@ msgid ""
"which means the moves that cut into the material."
msgstr ""
-#: appGUI/ObjectUI.py:1796 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:62
+#: appGUI/ObjectUI.py:1808 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:62
msgid "Travel"
msgstr ""
-#: appGUI/ObjectUI.py:1819
+#: appGUI/ObjectUI.py:1831
msgid "Edit an GCode object."
msgstr ""
-#: appGUI/ObjectUI.py:1852 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:71
+#: appGUI/ObjectUI.py:1868 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:71
msgid "Display Annotation"
msgstr ""
-#: appGUI/ObjectUI.py:1854 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:73
+#: appGUI/ObjectUI.py:1870 appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:73
msgid ""
"This selects if to display text annotation on the plot.\n"
"When checked it will display numbers in order for each end\n"
"of a travel line."
msgstr ""
-#: appGUI/ObjectUI.py:1866 appObjects/FlatCAMObj.py:861 appTools/ToolProperties.py:562
+#: appGUI/ObjectUI.py:1882 appObjects/FlatCAMObj.py:861 appTools/ToolProperties.py:562
msgid "Travelled distance"
msgstr ""
-#: appGUI/ObjectUI.py:1868
+#: appGUI/ObjectUI.py:1884
msgid ""
"This is the total travelled distance on X-Y plane.\n"
"In current units."
msgstr ""
-#: appGUI/ObjectUI.py:1879
+#: appGUI/ObjectUI.py:1895
msgid "Estimated time"
msgstr ""
-#: appGUI/ObjectUI.py:1881
+#: appGUI/ObjectUI.py:1897
msgid ""
"This is the estimated time to do the routing/drilling,\n"
"without the time spent in ToolChange events."
msgstr ""
-#: appGUI/ObjectUI.py:1905
+#: appGUI/ObjectUI.py:1921
msgid "CNC Tools Table"
msgstr ""
-#: appGUI/ObjectUI.py:1908
+#: appGUI/ObjectUI.py:1924
msgid ""
"Tools in this CNCJob object used for cutting.\n"
"The tool diameter is used for plotting on canvas.\n"
@@ -6668,326 +6668,326 @@ msgid ""
"ball(B), or V-Shaped(V)."
msgstr ""
-#: appGUI/ObjectUI.py:1936 appGUI/ObjectUI.py:1947
+#: appGUI/ObjectUI.py:1952 appGUI/ObjectUI.py:1963
msgid "P"
msgstr ""
-#: appGUI/ObjectUI.py:1957
+#: appGUI/ObjectUI.py:1973
msgid "Update Plot"
msgstr ""
-#: appGUI/ObjectUI.py:1959
+#: appGUI/ObjectUI.py:1975
msgid "Update the plot."
msgstr ""
-#: appGUI/ObjectUI.py:1969
+#: appGUI/ObjectUI.py:1985
msgid "Use CNC Code Snippets"
msgstr ""
-#: appGUI/ObjectUI.py:1971
+#: appGUI/ObjectUI.py:1987
msgid ""
"When selected, it will include CNC Code snippets (append and prepend)\n"
"defined in the Preferences."
msgstr ""
-#: appGUI/ObjectUI.py:1977 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:64
+#: appGUI/ObjectUI.py:1993 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:64
msgid "Autolevelling"
msgstr ""
-#: appGUI/ObjectUI.py:1979
+#: appGUI/ObjectUI.py:1995
msgid "Enable the autolevelling feature."
msgstr ""
-#: appGUI/ObjectUI.py:1996
+#: appGUI/ObjectUI.py:2012
msgid "Probe Points Table"
msgstr ""
-#: appGUI/ObjectUI.py:1997
+#: appGUI/ObjectUI.py:2013
msgid "Generate GCode that will obtain the height map"
msgstr ""
-#: appGUI/ObjectUI.py:1999
+#: appGUI/ObjectUI.py:2015
msgid "Show"
msgstr ""
-#: appGUI/ObjectUI.py:2000
+#: appGUI/ObjectUI.py:2016
msgid "Toggle the display of the Probe Points table."
msgstr ""
-#: appGUI/ObjectUI.py:2013
+#: appGUI/ObjectUI.py:2029
msgid "X-Y Coordinates"
msgstr ""
-#: appGUI/ObjectUI.py:2013
+#: appGUI/ObjectUI.py:2029
msgid "Height"
msgstr ""
-#: appGUI/ObjectUI.py:2017
+#: appGUI/ObjectUI.py:2033
msgid "Plot probing points"
msgstr ""
-#: appGUI/ObjectUI.py:2019
+#: appGUI/ObjectUI.py:2035
msgid ""
"Plot the probing points in the table.\n"
"If a Voronoi method is used then\n"
"the Voronoi areas are also plotted."
msgstr ""
-#: appGUI/ObjectUI.py:2034
+#: appGUI/ObjectUI.py:2050
msgid "Probe GCode Generation"
msgstr ""
-#: appGUI/ObjectUI.py:2036
+#: appGUI/ObjectUI.py:2052
msgid ""
"Will create a GCode which will be sent to the controller,\n"
"either through a file or directly, with the intent to get the height map\n"
"that is to modify the original GCode to level the cutting height."
msgstr ""
-#: appGUI/ObjectUI.py:2043 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
+#: appGUI/ObjectUI.py:2059 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:119
msgid "Probe Z travel"
msgstr ""
-#: appGUI/ObjectUI.py:2045 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
+#: appGUI/ObjectUI.py:2061 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:121
msgid "The safe Z for probe travelling between probe points."
msgstr ""
-#: appGUI/ObjectUI.py:2068 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
+#: appGUI/ObjectUI.py:2084 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:144
msgid "Probe Feedrate"
msgstr ""
-#: appGUI/ObjectUI.py:2085 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
+#: appGUI/ObjectUI.py:2101 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:71
msgid "Mode"
msgstr ""
-#: appGUI/ObjectUI.py:2086 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
+#: appGUI/ObjectUI.py:2102 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:72
msgid ""
"Choose a mode for height map generation.\n"
"- Manual: will pick a selection of probe points by clicking on canvas\n"
"- Grid: will automatically generate a grid of probe points"
msgstr ""
-#: appGUI/ObjectUI.py:2092 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
+#: appGUI/ObjectUI.py:2108 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:78
#: appGUI/preferences/tools/Tools2FiducialsPrefGroupUI.py:74 appTools/ToolCutOut.py:2322
#: appTools/ToolFiducials.py:801
msgid "Manual"
msgstr ""
-#: appGUI/ObjectUI.py:2093 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
+#: appGUI/ObjectUI.py:2109 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:79
msgid "Grid"
msgstr ""
-#: appGUI/ObjectUI.py:2100 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
+#: appGUI/ObjectUI.py:2116 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:86
msgid ""
"Choose a method for approximation of heights from autolevelling data.\n"
"- Voronoi: will generate a Voronoi diagram\n"
"- Bilinear: will use bilinear interpolation. Usable only for grid mode."
msgstr ""
-#: appGUI/ObjectUI.py:2106 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
+#: appGUI/ObjectUI.py:2122 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:92
msgid "Voronoi"
msgstr ""
-#: appGUI/ObjectUI.py:2107 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
+#: appGUI/ObjectUI.py:2123 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:93
msgid "Bilinear"
msgstr ""
-#: appGUI/ObjectUI.py:2120 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
+#: appGUI/ObjectUI.py:2136 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:101
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:77 appTools/ToolPanelize.py:787
msgid "Columns"
msgstr ""
-#: appGUI/ObjectUI.py:2122 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
+#: appGUI/ObjectUI.py:2138 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:103
msgid "The number of grid columns."
msgstr ""
-#: appGUI/ObjectUI.py:2131 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
+#: appGUI/ObjectUI.py:2147 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:111
#: appGUI/preferences/tools/ToolsPanelizePrefGroupUI.py:89 appTools/ToolPanelize.py:797
msgid "Rows"
msgstr ""
-#: appGUI/ObjectUI.py:2133 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
+#: appGUI/ObjectUI.py:2149 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:113
msgid "The number of gird rows."
msgstr ""
-#: appGUI/ObjectUI.py:2138
+#: appGUI/ObjectUI.py:2154
msgid "Add Probe Points"
msgstr ""
-#: appGUI/ObjectUI.py:2146 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
+#: appGUI/ObjectUI.py:2162 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:160
msgid "Controller"
msgstr ""
-#: appGUI/ObjectUI.py:2148 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
+#: appGUI/ObjectUI.py:2164 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:162
msgid ""
"The kind of controller for which to generate\n"
"height map gcode."
msgstr ""
-#: appGUI/ObjectUI.py:2194 appGUI/ObjectUI.py:2209 appObjects/FlatCAMCNCJob.py:1293
+#: appGUI/ObjectUI.py:2210 appGUI/ObjectUI.py:2225 appObjects/FlatCAMCNCJob.py:1293
#: appObjects/FlatCAMCNCJob.py:1315
msgid "Control"
msgstr ""
-#: appGUI/ObjectUI.py:2204 appGUI/ObjectUI.py:2211 appObjects/FlatCAMCNCJob.py:1295
+#: appGUI/ObjectUI.py:2220 appGUI/ObjectUI.py:2227 appObjects/FlatCAMCNCJob.py:1295
#: appObjects/FlatCAMCNCJob.py:1317
msgid "Sender"
msgstr ""
-#: appGUI/ObjectUI.py:2225
+#: appGUI/ObjectUI.py:2241
msgid "COM list"
msgstr ""
-#: appGUI/ObjectUI.py:2227 appGUI/ObjectUI.py:2242
+#: appGUI/ObjectUI.py:2243 appGUI/ObjectUI.py:2258
msgid "Lists the available serial ports."
msgstr ""
-#: appGUI/ObjectUI.py:2231
+#: appGUI/ObjectUI.py:2247
msgid "Search"
msgstr ""
-#: appGUI/ObjectUI.py:2233
+#: appGUI/ObjectUI.py:2249
msgid "Search for the available serial ports."
msgstr ""
-#: appGUI/ObjectUI.py:2240
+#: appGUI/ObjectUI.py:2256
msgid "Baud rates"
msgstr ""
-#: appGUI/ObjectUI.py:2259
+#: appGUI/ObjectUI.py:2275
msgid "New, custom baudrate."
msgstr ""
-#: appGUI/ObjectUI.py:2267
+#: appGUI/ObjectUI.py:2283
msgid "Add the specified custom baudrate to the list."
msgstr ""
-#: appGUI/ObjectUI.py:2273
+#: appGUI/ObjectUI.py:2289
msgid "Delete selected baudrate"
msgstr ""
-#: appGUI/ObjectUI.py:2277
+#: appGUI/ObjectUI.py:2293
msgid "Reset"
msgstr ""
-#: appGUI/ObjectUI.py:2279
+#: appGUI/ObjectUI.py:2295
msgid "Software reset of the controller."
msgstr ""
-#: appGUI/ObjectUI.py:2285 appObjects/FlatCAMCNCJob.py:1309
+#: appGUI/ObjectUI.py:2301 appObjects/FlatCAMCNCJob.py:1309
msgid "Disconnected"
msgstr ""
-#: appGUI/ObjectUI.py:2287
+#: appGUI/ObjectUI.py:2303
msgid "Connect to the selected port with the selected baud rate."
msgstr ""
-#: appGUI/ObjectUI.py:2312
+#: appGUI/ObjectUI.py:2328
msgid "Jog"
msgstr ""
-#: appGUI/ObjectUI.py:2320
+#: appGUI/ObjectUI.py:2336
msgid "Zero Axes"
msgstr ""
-#: appGUI/ObjectUI.py:2353
+#: appGUI/ObjectUI.py:2369
msgid "Pause/Resume"
msgstr ""
-#: appGUI/ObjectUI.py:2375 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
+#: appGUI/ObjectUI.py:2391 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:172
msgid "Step"
msgstr ""
-#: appGUI/ObjectUI.py:2377 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
+#: appGUI/ObjectUI.py:2393 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:174
msgid "Each jog action will move the axes with this value."
msgstr ""
-#: appGUI/ObjectUI.py:2389 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
+#: appGUI/ObjectUI.py:2405 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:185
#: appGUI/preferences/cncjob/CNCJobGenPrefGroupUI.py:89 appObjects/FlatCAMObj.py:828
#: appTools/ToolProperties.py:529
msgid "Feedrate"
msgstr ""
-#: appGUI/ObjectUI.py:2391 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
+#: appGUI/ObjectUI.py:2407 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:187
msgid "Feedrate when jogging."
msgstr ""
-#: appGUI/ObjectUI.py:2411
+#: appGUI/ObjectUI.py:2427
msgid "Send Command"
msgstr ""
-#: appGUI/ObjectUI.py:2413 appGUI/ObjectUI.py:2423
+#: appGUI/ObjectUI.py:2429 appGUI/ObjectUI.py:2439
msgid "Send a custom command to GRBL."
msgstr ""
-#: appGUI/ObjectUI.py:2418
+#: appGUI/ObjectUI.py:2434
msgid "Type GRBL command ..."
msgstr ""
-#: appGUI/ObjectUI.py:2421
+#: appGUI/ObjectUI.py:2437
msgid "Send"
msgstr ""
-#: appGUI/ObjectUI.py:2429
+#: appGUI/ObjectUI.py:2445
msgid "Get Config parameter"
msgstr ""
-#: appGUI/ObjectUI.py:2431
+#: appGUI/ObjectUI.py:2447
msgid "A GRBL configuration parameter."
msgstr ""
-#: appGUI/ObjectUI.py:2436
+#: appGUI/ObjectUI.py:2452
msgid "Type GRBL parameter ..."
msgstr ""
-#: appGUI/ObjectUI.py:2439
+#: appGUI/ObjectUI.py:2455
msgid "Get"
msgstr ""
-#: appGUI/ObjectUI.py:2441
+#: appGUI/ObjectUI.py:2457
msgid "Get the value of a specified GRBL parameter."
msgstr ""
-#: appGUI/ObjectUI.py:2449
+#: appGUI/ObjectUI.py:2465
msgid "Get Report"
msgstr ""
-#: appGUI/ObjectUI.py:2451
+#: appGUI/ObjectUI.py:2467
msgid "Print in shell the GRBL report."
msgstr ""
-#: appGUI/ObjectUI.py:2457
+#: appGUI/ObjectUI.py:2473
msgid "Apply AutoLevelling"
msgstr ""
-#: appGUI/ObjectUI.py:2459
+#: appGUI/ObjectUI.py:2475
msgid ""
"Will send the probing GCode to the GRBL controller,\n"
"wait for the Z probing data and then apply this data\n"
"over the original GCode therefore doing autolevelling."
msgstr ""
-#: appGUI/ObjectUI.py:2468
+#: appGUI/ObjectUI.py:2484
msgid "Will save the GRBL height map."
msgstr ""
-#: appGUI/ObjectUI.py:2478
+#: appGUI/ObjectUI.py:2494
msgid "Save Probing GCode"
msgstr ""
-#: appGUI/ObjectUI.py:2480
+#: appGUI/ObjectUI.py:2496
msgid "Will save the probing GCode."
msgstr ""
-#: appGUI/ObjectUI.py:2489
+#: appGUI/ObjectUI.py:2505
msgid "View/Edit the probing GCode."
msgstr ""
-#: appGUI/ObjectUI.py:2496 appObjects/FlatCAMCNCJob.py:1726 appObjects/FlatCAMCNCJob.py:1730
+#: appGUI/ObjectUI.py:2512 appObjects/FlatCAMCNCJob.py:1726 appObjects/FlatCAMCNCJob.py:1730
msgid "Import Height Map"
msgstr ""
-#: appGUI/ObjectUI.py:2498
+#: appGUI/ObjectUI.py:2514
msgid ""
"Import the file that has the Z heights\n"
"obtained through probing and then apply this data\n"
@@ -6995,100 +6995,100 @@ msgid ""
"doing autolevelling."
msgstr ""
-#: appGUI/ObjectUI.py:2516
+#: appGUI/ObjectUI.py:2532
msgid "Export CNC Code"
msgstr ""
-#: appGUI/ObjectUI.py:2518 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
+#: appGUI/ObjectUI.py:2534 appGUI/preferences/cncjob/CNCJobAdvOptPrefGroupUI.py:37
#: appGUI/preferences/cncjob/CNCJobOptPrefGroupUI.py:33
msgid ""
"Export and save G-Code to\n"
"make this object to a file."
msgstr ""
-#: appGUI/ObjectUI.py:2527
+#: appGUI/ObjectUI.py:2543
msgid "Save CNC Code"
msgstr ""
-#: appGUI/ObjectUI.py:2530
+#: appGUI/ObjectUI.py:2546
msgid ""
"Opens dialog to save G-Code\n"
"file."
msgstr ""
-#: appGUI/ObjectUI.py:2537
+#: appGUI/ObjectUI.py:2553
msgid "Review CNC Code."
msgstr ""
-#: appGUI/ObjectUI.py:2598
+#: appGUI/ObjectUI.py:2614
msgid "Script Object"
msgstr ""
-#: appGUI/ObjectUI.py:2618 appGUI/ObjectUI.py:2692
+#: appGUI/ObjectUI.py:2634 appGUI/ObjectUI.py:2708
msgid "Auto Completer"
msgstr ""
-#: appGUI/ObjectUI.py:2620
+#: appGUI/ObjectUI.py:2636
msgid "This selects if the auto completer is enabled in the Script Editor."
msgstr ""
-#: appGUI/ObjectUI.py:2665
+#: appGUI/ObjectUI.py:2681
msgid "Document Object"
msgstr ""
-#: appGUI/ObjectUI.py:2694
+#: appGUI/ObjectUI.py:2710
msgid "This selects if the auto completer is enabled in the Document Editor."
msgstr ""
-#: appGUI/ObjectUI.py:2712
+#: appGUI/ObjectUI.py:2728
msgid "Font Type"
msgstr ""
-#: appGUI/ObjectUI.py:2729 appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
+#: appGUI/ObjectUI.py:2745 appGUI/preferences/general/GeneralAPPSetGroupUI.py:189
msgid "Font Size"
msgstr ""
-#: appGUI/ObjectUI.py:2765
+#: appGUI/ObjectUI.py:2781
msgid "Alignment"
msgstr ""
-#: appGUI/ObjectUI.py:2770
+#: appGUI/ObjectUI.py:2786
msgid "Align Left"
msgstr ""
-#: appGUI/ObjectUI.py:2775 app_Main.py:4993
+#: appGUI/ObjectUI.py:2791 app_Main.py:4993
msgid "Center"
msgstr ""
-#: appGUI/ObjectUI.py:2780
+#: appGUI/ObjectUI.py:2796
msgid "Align Right"
msgstr ""
-#: appGUI/ObjectUI.py:2785
+#: appGUI/ObjectUI.py:2801
msgid "Justify"
msgstr ""
-#: appGUI/ObjectUI.py:2792
+#: appGUI/ObjectUI.py:2808
msgid "Font Color"
msgstr ""
-#: appGUI/ObjectUI.py:2794
+#: appGUI/ObjectUI.py:2810
msgid "Set the font color for the selected text"
msgstr ""
-#: appGUI/ObjectUI.py:2808
+#: appGUI/ObjectUI.py:2824
msgid "Selection Color"
msgstr ""
-#: appGUI/ObjectUI.py:2810
+#: appGUI/ObjectUI.py:2826
msgid "Set the selection color when doing text selection."
msgstr ""
-#: appGUI/ObjectUI.py:2824
+#: appGUI/ObjectUI.py:2840
msgid "Tab Size"
msgstr ""
-#: appGUI/ObjectUI.py:2826
+#: appGUI/ObjectUI.py:2842
msgid "Set the tab size. In pixels. Default value is 80 pixels."
msgstr ""