- fixed Measuring Tool - after doing a measurement the Notebook was switching to Project Tab without letting the user see the results

- more work on the translation engine; the app now restarts after a language is applied
- added protection against using Travel Z parameter with negative or zero value (in Geometry).

FlatCAMApp.py

@@ -45,7 +45,7 @@ from PlotCanvas import *
 from FlatCAMGUI import *
 from FlatCAMCommon import LoudDict
 from FlatCAMPostProc import load_postprocessors
-from FlatCAMTranslation import *
+import FlatCAMTranslation as fcTranslate
 
 from FlatCAMEditor import FlatCAMGeoEditor, FlatCAMExcEditor
 from FlatCAMProcess import *
@@ -563,7 +563,7 @@ class App(QtCore.QObject):
         #### LOAD LANGUAGES ####
         #############################
 
-        self.languages = load_languages(self)
+        self.languages = fcTranslate.load_languages()
         for name in list(self.languages.keys()):
             self.ui.general_defaults_form.general_app_group.language_cb.addItem(self.languages[name])
 
@@ -835,15 +835,29 @@ class App(QtCore.QObject):
 
         ###############################
         ### Load defaults from file ###
+        ###############################
+
         if user_defaults:
             self.load_defaults(filename='current_defaults')
 
         ############################
         ##### APPLY APP LANGUAGE ###
-        ###########################
+        ############################
 
-        # apply the default language
+        ret_val = fcTranslate.apply_language('FlatCAMApp')
-        self.on_language_apply()
+
+        if ret_val == "no language":
+            self.inform.emit("[ERROR] Could not find the Language files. The App strings are missing.")
+            log.debug("Could not find the Language files. The App strings are missing.")
+        else:
+            # make the current language the current selection on the language combobox
+            self.ui.general_defaults_form.general_app_group.language_cb.setCurrentText(ret_val)
+            log.debug("App.__init__() --> Applied %s language." % str(ret_val).capitalize())
+
+
+        ###################################
+        ### CREATE UNIQUE SERIAL NUMBER ###
+        ###################################
 
         chars = 'abcdefghijklmnopqrstuvwxyz0123456789'
         if self.defaults['global_serial'] == 0 or len(str(self.defaults['global_serial'])) < 10:
@@ -1369,7 +1383,9 @@ class App(QtCore.QObject):
         ### GUI PREFERENCES SIGNALS ###
         ###############################
         self.ui.general_options_form.general_app_group.units_radio.group_toggle_fn = self.on_toggle_units
-        self.ui.general_defaults_form.general_app_group.language_apply_btn.clicked.connect(self.on_language_apply)
+        self.ui.general_defaults_form.general_app_group.language_apply_btn.clicked.connect(
+            lambda: fcTranslate.on_language_apply_click(self, restart=True)
+        )
         self.ui.general_defaults_form.general_app_group.units_radio.activated_custom.connect(self.on_toggle_units)
 
         ###############################
@@ -3267,31 +3283,6 @@ class App(QtCore.QObject):
             self.ui.general_defaults_form.general_app_group.units_radio.set_value("MM")
         self.on_toggle_units()
 
-    def on_language_apply(self, lang=None):
-        """
-        Using instructions from here:
-        https://inventwithpython.com/blog/2014/12/20/translate-your-python-3-program-with-the-gettext-module/
-
-        :return:
-        """
-        name = ''
-
-        if lang is None:
-            name = self.ui.general_defaults_form.general_app_group.language_cb.currentText()
-        else:
-            name = lang
-
-        for lang_code, lang_usable in self.languages.items():
-            if lang_usable == name:
-                # break and then use the current key as language
-                break
-
-        try:
-            lang = gettext.translation('fc', localedir=str(languages_dir(self)), languages=[lang_code])
-            lang.install()
-        except Exception as e:
-            log.debug("App.on_language_apply() --> %s" % str(e))
-
     def on_fullscreen(self):
         self.report_usage("on_fullscreen()")
 
@@ -4941,8 +4932,13 @@ class App(QtCore.QObject):
                 self.collection.set_all_inactive()
                 # delete the possible selection box around a possible selected object
                 self.delete_selection_shape()
-                # and as a convenience move the focus to the Project tab because Selected tab is now empty
+                # and as a convenience move the focus to the Project tab because Selected tab is now empty but
-                self.ui.notebook.setCurrentWidget(self.ui.project_tab)
+                # only when working on App
+
+                if self.call_source != 'measurement':
+                    self.ui.notebook.setCurrentWidget(self.ui.project_tab)
+                else:
+                    self.call_source = 'app'
 
                 # delete any text in the status bar, implicitly the last object name that was selected
                 self.inform.emit("")

FlatCAMEditor.py

@@ -33,6 +33,10 @@ from vispy.scene.visuals import Markers
 from copy import copy
 import freetype as ft
 
+import gettext
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('FlatCAMEditor')
+
 
 class BufferSelectionTool(FlatCAMTool):
     """

FlatCAMGUI.py

@@ -14,6 +14,10 @@ import webbrowser
 
 from FlatCAMEditor import FCShapeTool
 
+import gettext
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('FlatCAMGui')
+
 
 class FlatCAMGUI(QtWidgets.QMainWindow):
     # Emitted when persistent window geometry needs to be retained

FlatCAMObj.py

@@ -22,9 +22,13 @@ from camlib import *
 from VisPyVisuals import ShapeCollectionVisual
 import itertools
 
+import gettext
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('FlatCAMObj')
+
 
-# Interrupts plotting process if FlatCAMObj has been deleted
 class ObjectDeleted(Exception):
+    # Interrupts plotting process if FlatCAMObj has been deleted
     pass
 
 
@@ -37,6 +41,8 @@ class ValidationError(Exception):
 ########################################
 ##            FlatCAMObj              ##
 ########################################
+
+
 class FlatCAMObj(QtCore.QObject):
     """
     Base type of objects handled in FlatCAM. These become interactive

FlatCAMTranslation.py

@@ -1,11 +1,16 @@
 import os
-from datetime import datetime
+import sys
+
+from PyQt5 import QtWidgets, QtGui
+from PyQt5.QtCore import QSettings
 
 import FlatCAMApp
-from FlatCAMApp import log
+from GUIElements import log
+import gettext
 
 # ISO639-1 codes from here: https://en.wikipedia.org/wiki/List_of_ISO_639-1_codes
 languages_dict = {
+    'zh': 'Chinese',
     'de': 'German',
     'en': 'English',
     'es': 'Spanish',
@@ -13,7 +18,6 @@ languages_dict = {
     'it': 'Italian',
     'ro': 'Romanian',
     'ru': 'Russian',
-    'zh': 'Chinese',
 }
 
 translations = {}
@@ -21,8 +25,8 @@ translations = {}
 languages_path_search = ''
 
 
-def load_languages(app):
+def load_languages():
-    languages_path_search = os.path.join('locale')
+    languages_path_search = os.path.join(os.path.dirname(os.path.abspath(__file__)), 'locale')
 
     available_translations = next(os.walk(languages_path_search))[1]
 
@@ -35,5 +39,79 @@ def load_languages(app):
     return translations
 
 
-def languages_dir(app):
+def languages_dir():
-    return os.path.join('locale')
+    return os.path.join(os.path.dirname(os.path.abspath(__file__)), 'locale')
+
+
+def on_language_apply_click(app, restart=False):
+    """
+    Using instructions from here:
+    https://inventwithpython.com/blog/2014/12/20/translate-your-python-3-program-with-the-gettext-module/
+
+    :return:
+    """
+    name = app.ui.general_defaults_form.general_app_group.language_cb.currentText()
+
+    if restart:
+        msgbox = QtWidgets.QMessageBox()
+
+        msgbox.setInformativeText("Are you sure do you want to change the current language to %s?\n\n"
+                                  "The application will restart." % name.capitalize())
+        msgbox.setWindowTitle("Apply Language ...")
+        msgbox.setWindowIcon(QtGui.QIcon('share/save_as.png'))
+        msgbox.setStandardButtons(QtWidgets.QMessageBox.Yes | QtWidgets.QMessageBox.Cancel)
+        msgbox.setDefaultButton(QtWidgets.QMessageBox.Yes)
+
+        response = msgbox.exec_()
+
+        if response == QtWidgets.QMessageBox.Cancel:
+            return
+        else:
+            settings = QSettings("Open Source", "FlatCAM")
+            saved_language = name
+            settings.setValue('language', saved_language)
+            # This will write the setting to the platform specific storage.
+            del settings
+
+            restart_program(app=app)
+
+
+def apply_language(filename, lang=None):
+    lang_code = ''
+
+    if lang is None:
+        settings = QSettings("Open Source", "FlatCAM")
+        if settings.contains("language"):
+            name = settings.value('language')
+        else:
+            name = settings.value('English')
+    else:
+        name = str(lang)
+
+    for lang_code, lang_usable in load_languages().items():
+        if lang_usable == name:
+            # break and then use the current key as language
+            break
+
+    if lang_code == '':
+        return "no language"
+    else:
+        try:
+            current_lang = gettext.translation(str(filename), localedir=languages_dir(), languages=[lang_code])
+            current_lang.install()
+        except Exception as e:
+            log.debug("FlatCAMTranslation.apply_language() --> %s" % str(e))
+
+        return name
+
+
+def restart_program(app):
+    """Restarts the current program.
+    Note: this function does not return. Any cleanup action (like
+    saving data) must be done before calling this function.
+    """
+    app.save_defaults()
+    python = sys.executable
+    os.execl(python, python, *sys.argv)
+
+

ObjectCollection.py

@@ -14,6 +14,10 @@ from PyQt5 import QtGui, QtCore, QtWidgets
 from PyQt5.QtCore import Qt
 # import webbrowser
 
+import gettext
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ObjectCollection')
+
 
 class KeySensitiveListView(QtWidgets.QTreeView):
     """

ObjectUI.py

@@ -5,6 +5,10 @@ from GUIElements import FCEntry, FloatEntry, EvalEntry, FCCheckBox, FCTable, \
     LengthEntry, FCTextArea, IntEntry, RadioSet, OptionalInputSection, FCComboBox, FloatEntry2, EvalEntry2, FCButton
 from camlib import Excellon
 
+import gettext
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ObjectUI')
+
 
 class ObjectUI(QtWidgets.QWidget):
     """

README.md

@@ -14,7 +14,9 @@ CAD program, and create G-Code for Isolation routing.
 - made showing a shape when hovering over objects, optional, by adding a Preferences -> General parameter
 - starting to work in internationalization using gettext()
 - Finished adding _() in FlatCAM Tools
--
+- fixed Measuring Tool - after doing a measurement the Notebook was switching to Project Tab without letting the user see the results
+- more work on the translation engine; the app now restarts after a language is applied
+- added protection against using Travel Z parameter with negative or zero value (in Geometry).
 
 6.03.2019
 

camlib.py

@@ -5340,7 +5340,7 @@ class CNCjob(Geometry):
         self.f_plunge = self.app.defaults["geometry_f_plunge"]
 
         if self.z_cut is None:
-            self.app.inform.emit("[ERROR_NOTCL] Cut_Z parameter is None. Most likely a bad combinations of "
+            self.app.inform.emit("[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad combinations of "
                                  "other parameters.")
             return 'fail'
 
@@ -5354,6 +5354,23 @@ class CNCjob(Geometry):
         elif self.z_cut == 0:
             self.app.inform.emit("[WARNING] The Cut Z parameter is zero. "
                                  "There will be no cut, skipping %s file" % self.options['name'])
+            return 'fail'
+
+        if self.z_move is None:
+            self.app.inform.emit("[ERROR_NOTCL] Travel Z parameter is None or zero.")
+            return 'fail'
+
+        if self.z_move < 0:
+            self.app.inform.emit("[WARNING] The Travel Z parameter has negative value. "
+                                 "It is the height value to travel between cuts.\n"
+                                 "The Z Travel parameter needs to have a positive value, assuming it is a typo "
+                                 "therefore the app will convert the value to positive."
+                                 "Check the resulting CNC code (Gcode etc).")
+            self.z_move = -self.z_move
+        elif self.z_move == 0:
+            self.app.inform.emit("[WARNING] The Z Travel parameter is zero. "
+                                 "This is dangerous, skipping %s file" % self.options['name'])
+            return 'fail'
 
         ## Index first and last points in paths
         # What points to index.
@@ -5594,7 +5611,7 @@ class CNCjob(Geometry):
         self.f_plunge = self.app.defaults["geometry_f_plunge"]
 
         if self.z_cut is None:
-            self.app.inform.emit("[ERROR_NOTCL] Cut_Z parameter is None. Most likely a bad combinations of "
+            self.app.inform.emit("[ERROR_NOTCL] Cut_Z parameter is None or zero. Most likely a bad combinations of "
                                  "other parameters.")
             return 'fail'
 
@@ -5608,6 +5625,23 @@ class CNCjob(Geometry):
         elif self.z_cut == 0:
             self.app.inform.emit("[WARNING] The Cut Z parameter is zero. "
                                  "There will be no cut, skipping %s file" % geometry.options['name'])
+            return 'fail'
+
+        if self.z_move is None:
+            self.app.inform.emit("[ERROR_NOTCL] Travel Z parameter is None or zero.")
+            return 'fail'
+
+        if self.z_move < 0:
+            self.app.inform.emit("[WARNING] The Travel Z parameter has negative value. "
+                                 "It is the height value to travel between cuts.\n"
+                                 "The Z Travel parameter needs to have a positive value, assuming it is a typo "
+                                 "therefore the app will convert the value to positive."
+                                 "Check the resulting CNC code (Gcode etc).")
+            self.z_move = -self.z_move
+        elif self.z_move == 0:
+            self.app.inform.emit("[WARNING] The Z Travel parameter is zero. "
+                                 "This is dangerous, skipping %s file" % self.options['name'])
+            return 'fail'
 
         ## Index first and last points in paths
         # What points to index.

flatcamTools/ToolCalculators.py

@@ -3,10 +3,10 @@ from GUIElements import FCEntry
 from FlatCAMTool import FlatCAMTool
 from FlatCAMObj import *
 import math
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolCalculators')
 
 
 class ToolCalculator(FlatCAMTool):

flatcamTools/ToolCutOut.py

@@ -2,10 +2,10 @@ from FlatCAMTool import FlatCAMTool
 from ObjectCollection import *
 from FlatCAMApp import *
 from shapely.geometry import box
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolCutOut')
 
 
 class CutOut(FlatCAMTool):

flatcamTools/ToolDblSided.py

@@ -5,10 +5,10 @@ from FlatCAMObj import *
 from shapely.geometry import Point
 from shapely import affinity
 from PyQt5 import QtCore
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolDblSided')
 
 
 class DblSidedTool(FlatCAMTool):

flatcamTools/ToolFilm.py

@@ -2,11 +2,10 @@ from FlatCAMTool import FlatCAMTool
 
 from GUIElements import RadioSet, FCEntry
 from PyQt5 import QtGui, QtCore, QtWidgets
+
 import gettext
-
+import FlatCAMTranslation as fcTranslate
-def _(text):
+fcTranslate.apply_language('ToolFilm')
-    return text
-
 
 class Film(FlatCAMTool):
 

flatcamTools/ToolImage.py

@@ -2,11 +2,10 @@ from FlatCAMTool import FlatCAMTool
 
 from GUIElements import RadioSet, FloatEntry, FCComboBox, IntEntry
 from PyQt5 import QtGui, QtCore, QtWidgets
+
 import gettext
-
+import FlatCAMTranslation as fcTranslate
-def _(text):
+fcTranslate.apply_language('ToolImage')
-    return text
-
 
 class ToolImage(FlatCAMTool):
 

flatcamTools/ToolMeasurement.py

@@ -1,13 +1,15 @@
 from FlatCAMTool import FlatCAMTool
 from FlatCAMObj import *
 from VisPyVisuals import *
+from PyQt5.QtCore import QSettings
 
 from copy import copy
 from math import sqrt
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolMeasurement')
+
 
 class Measurement(FlatCAMTool):
 
@@ -160,6 +162,11 @@ class Measurement(FlatCAMTool):
 
         if self.app.tool_tab_locked is True:
             return
+
+        # if the splitter is hidden, display it, else hide it but only if the current widget is the same
+        if self.app.ui.splitter.sizes()[0] == 0:
+            self.app.ui.splitter.setSizes([1, 1])
+
         self.toggle()
 
         self.set_tool_ui()
@@ -185,6 +192,7 @@ class Measurement(FlatCAMTool):
         if self.active is True:
             # DISABLE the Measuring TOOL
             self.active = False
+
             # disconnect the mouse/key events from functions of measurement tool
             self.app.plotcanvas.vis_disconnect('mouse_move', self.on_mouse_move_meas)
             self.app.plotcanvas.vis_disconnect('mouse_press', self.on_click_meas)
@@ -206,6 +214,7 @@ class Measurement(FlatCAMTool):
                 self.app.exc_editor.canvas.vis_connect('key_press', self.app.exc_editor.on_canvas_key)
                 self.app.exc_editor.canvas.vis_connect('mouse_release', self.app.exc_editor.on_canvas_click_release)
 
+            self.app.call_source = 'measurement'
             self.clicked_meas = 0
             self.app.command_active = None
             # delete the measuring line

flatcamTools/ToolMove.py

@@ -4,10 +4,10 @@ from VisPyVisuals import *
 
 from io import StringIO
 from copy import copy
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolMove')
 
 
 class ToolMove(FlatCAMTool):

flatcamTools/ToolNonCopperClear.py

@@ -2,10 +2,10 @@ from FlatCAMTool import FlatCAMTool
 from copy import copy,deepcopy
 from ObjectCollection import *
 import time
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolNonCopperClear')
 
 
 class NonCopperClear(FlatCAMTool, Gerber):

flatcamTools/ToolPaint.py

@@ -1,11 +1,10 @@
 from FlatCAMTool import FlatCAMTool
 from copy import copy,deepcopy
 from ObjectCollection import *
+
 import gettext
-
+import FlatCAMTranslation as fcTranslate
-def _(text):
+fcTranslate.apply_language('ToolPaint')
-    return text
-
 
 class ToolPaint(FlatCAMTool, Gerber):
 

flatcamTools/ToolPanelize.py

@@ -2,10 +2,10 @@ from FlatCAMTool import FlatCAMTool
 from copy import copy, deepcopy
 from ObjectCollection import *
 import time
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolPanelize')
 
 
 class Panelize(FlatCAMTool):

flatcamTools/ToolProperties.py

@@ -2,10 +2,10 @@ from PyQt5 import QtGui, QtCore, QtWidgets
 from PyQt5.QtCore import Qt
 from FlatCAMTool import FlatCAMTool
 from FlatCAMObj import *
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolProperties')
 
 
 class Properties(FlatCAMTool):

flatcamTools/ToolShell.py

@@ -12,10 +12,10 @@ from PyQt5.QtGui import QTextCursor
 from PyQt5.QtWidgets import QVBoxLayout, QWidget
 from GUIElements import _BrowserTextEdit, _ExpandableTextEdit
 import html
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolShell')
 
 
 class TermWidget(QWidget):

flatcamTools/ToolSolderPaste.py

@@ -16,10 +16,10 @@ from shapely.ops import cascaded_union
 
 import traceback
 from io import StringIO
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolSolderPaste')
 
 
 class SolderPaste(FlatCAMTool):

flatcamTools/ToolTransform.py

@@ -3,10 +3,10 @@ from PyQt5.QtCore import Qt
 from GUIElements import FCEntry, FCButton, OptionalInputSection
 from FlatCAMTool import FlatCAMTool
 from FlatCAMObj import *
-import gettext
 
-def _(text):
+import gettext
-    return text
+import FlatCAMTranslation as fcTranslate
+fcTranslate.apply_language('ToolTransform')
 
 
 class ToolTransform(FlatCAMTool):

locale/__init__.py

@@ -1 +0,0 @@
-pass

locale/de/LC_MESSAGES/ToolMeasurement.po

@@ -0,0 +1,92 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR ORGANIZATION
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: 2019-03-07 23:07+0200\n"
+"PO-Revision-Date: 2019-03-07 23:19+0200\n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"X-Generator: Poedit 2.2.1\n"
+"Last-Translator: \n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Language: en\n"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:28
+msgid "Measurement"
+msgstr "Measurement"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+msgid "Start"
+msgstr "Start"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Coords"
+msgstr "Coords"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:50
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:101
+msgid "This is measuring Start point coordinates."
+msgstr "This is measuring Start point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Stop"
+msgstr "Stop"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:53
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:106
+msgid "This is the measuring Stop point coordinates."
+msgstr "This is the measuring Stop point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:56
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:111
+msgid "This is the distance measured over the X axis."
+msgstr "This is the distance measured over the X axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:59
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:117
+msgid "This is the distance measured over the Y axis."
+msgstr "This is the distance measured over the Y axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:61
+msgid "DISTANCE"
+msgstr "DISTANCE"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:62
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:123
+msgid "This is the point to point Euclidian distance."
+msgstr "This is the point to point Euclidian distance."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:65
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:72
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:79
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:86
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:93
+msgid "Those are the units in which the distance is measured."
+msgstr "Those are the units in which the distance is measured."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:126
+msgid "Measure"
+msgstr "Measure"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:185
+msgid "Meas. Tool"
+msgstr "Meas. Tool"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:278
+msgid "MEASURING: Click on the Start point ..."
+msgstr "MEASURING: Click on the Start point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:307
+msgid "MEASURING: Click on the Destination point ..."
+msgstr "MEASURING: Click on the Destination point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:328
+msgid "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"
+msgstr "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"

locale/en/LC_MESSAGES/ToolMeasurement.po

@@ -0,0 +1,92 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR ORGANIZATION
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: 2019-03-07 23:07+0200\n"
+"PO-Revision-Date: 2019-03-07 23:19+0200\n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"X-Generator: Poedit 2.2.1\n"
+"Last-Translator: \n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Language: en\n"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:28
+msgid "Measurement"
+msgstr "Measurement"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+msgid "Start"
+msgstr "Start"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Coords"
+msgstr "Coords"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:50
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:101
+msgid "This is measuring Start point coordinates."
+msgstr "This is measuring Start point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Stop"
+msgstr "Stop"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:53
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:106
+msgid "This is the measuring Stop point coordinates."
+msgstr "This is the measuring Stop point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:56
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:111
+msgid "This is the distance measured over the X axis."
+msgstr "This is the distance measured over the X axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:59
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:117
+msgid "This is the distance measured over the Y axis."
+msgstr "This is the distance measured over the Y axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:61
+msgid "DISTANCE"
+msgstr "DISTANCE"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:62
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:123
+msgid "This is the point to point Euclidian distance."
+msgstr "This is the point to point Euclidian distance."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:65
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:72
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:79
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:86
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:93
+msgid "Those are the units in which the distance is measured."
+msgstr "Those are the units in which the distance is measured."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:126
+msgid "Measure"
+msgstr "Measure"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:185
+msgid "Meas. Tool"
+msgstr "Meas. Tool"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:278
+msgid "MEASURING: Click on the Start point ..."
+msgstr "MEASURING: Click on the Start point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:307
+msgid "MEASURING: Click on the Destination point ..."
+msgstr "MEASURING: Click on the Destination point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:328
+msgid "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"
+msgstr "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"

locale/es/LC_MESSAGES/ToolMeasurement.po

@@ -0,0 +1,92 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR ORGANIZATION
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: 2019-03-07 23:07+0200\n"
+"PO-Revision-Date: 2019-03-07 23:19+0200\n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"X-Generator: Poedit 2.2.1\n"
+"Last-Translator: \n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Language: en\n"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:28
+msgid "Measurement"
+msgstr "Measurement"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+msgid "Start"
+msgstr "Start"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Coords"
+msgstr "Coords"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:50
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:101
+msgid "This is measuring Start point coordinates."
+msgstr "This is measuring Start point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Stop"
+msgstr "Stop"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:53
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:106
+msgid "This is the measuring Stop point coordinates."
+msgstr "This is the measuring Stop point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:56
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:111
+msgid "This is the distance measured over the X axis."
+msgstr "This is the distance measured over the X axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:59
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:117
+msgid "This is the distance measured over the Y axis."
+msgstr "This is the distance measured over the Y axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:61
+msgid "DISTANCE"
+msgstr "DISTANCE"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:62
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:123
+msgid "This is the point to point Euclidian distance."
+msgstr "This is the point to point Euclidian distance."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:65
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:72
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:79
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:86
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:93
+msgid "Those are the units in which the distance is measured."
+msgstr "Those are the units in which the distance is measured."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:126
+msgid "Measure"
+msgstr "Measure"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:185
+msgid "Meas. Tool"
+msgstr "Meas. Tool"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:278
+msgid "MEASURING: Click on the Start point ..."
+msgstr "MEASURING: Click on the Start point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:307
+msgid "MEASURING: Click on the Destination point ..."
+msgstr "MEASURING: Click on the Destination point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:328
+msgid "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"
+msgstr "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"

locale/fr/LC_MESSAGES/ToolMeasurement.po

@@ -0,0 +1,92 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR ORGANIZATION
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: 2019-03-07 23:07+0200\n"
+"PO-Revision-Date: 2019-03-07 23:19+0200\n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"X-Generator: Poedit 2.2.1\n"
+"Last-Translator: \n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Language: en\n"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:28
+msgid "Measurement"
+msgstr "Measurement"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+msgid "Start"
+msgstr "Start"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Coords"
+msgstr "Coords"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:50
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:101
+msgid "This is measuring Start point coordinates."
+msgstr "This is measuring Start point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Stop"
+msgstr "Stop"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:53
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:106
+msgid "This is the measuring Stop point coordinates."
+msgstr "This is the measuring Stop point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:56
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:111
+msgid "This is the distance measured over the X axis."
+msgstr "This is the distance measured over the X axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:59
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:117
+msgid "This is the distance measured over the Y axis."
+msgstr "This is the distance measured over the Y axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:61
+msgid "DISTANCE"
+msgstr "DISTANCE"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:62
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:123
+msgid "This is the point to point Euclidian distance."
+msgstr "This is the point to point Euclidian distance."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:65
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:72
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:79
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:86
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:93
+msgid "Those are the units in which the distance is measured."
+msgstr "Those are the units in which the distance is measured."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:126
+msgid "Measure"
+msgstr "Measure"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:185
+msgid "Meas. Tool"
+msgstr "Meas. Tool"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:278
+msgid "MEASURING: Click on the Start point ..."
+msgstr "MEASURING: Click on the Start point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:307
+msgid "MEASURING: Click on the Destination point ..."
+msgstr "MEASURING: Click on the Destination point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:328
+msgid "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"
+msgstr "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"

locale/it/LC_MESSAGES/ToolMeasurement.po

@@ -0,0 +1,92 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR ORGANIZATION
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: 2019-03-07 23:07+0200\n"
+"PO-Revision-Date: 2019-03-07 23:19+0200\n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"X-Generator: Poedit 2.2.1\n"
+"Last-Translator: \n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Language: en\n"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:28
+msgid "Measurement"
+msgstr "Measurement"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+msgid "Start"
+msgstr "Start"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Coords"
+msgstr "Coords"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:50
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:101
+msgid "This is measuring Start point coordinates."
+msgstr "This is measuring Start point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Stop"
+msgstr "Stop"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:53
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:106
+msgid "This is the measuring Stop point coordinates."
+msgstr "This is the measuring Stop point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:56
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:111
+msgid "This is the distance measured over the X axis."
+msgstr "This is the distance measured over the X axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:59
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:117
+msgid "This is the distance measured over the Y axis."
+msgstr "This is the distance measured over the Y axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:61
+msgid "DISTANCE"
+msgstr "DISTANCE"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:62
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:123
+msgid "This is the point to point Euclidian distance."
+msgstr "This is the point to point Euclidian distance."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:65
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:72
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:79
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:86
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:93
+msgid "Those are the units in which the distance is measured."
+msgstr "Those are the units in which the distance is measured."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:126
+msgid "Measure"
+msgstr "Measure"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:185
+msgid "Meas. Tool"
+msgstr "Meas. Tool"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:278
+msgid "MEASURING: Click on the Start point ..."
+msgstr "MEASURING: Click on the Start point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:307
+msgid "MEASURING: Click on the Destination point ..."
+msgstr "MEASURING: Click on the Destination point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:328
+msgid "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"
+msgstr "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"

locale/ro/LC_MESSAGES/ToolMeasurement.po

@@ -0,0 +1,92 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR ORGANIZATION
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: 2019-03-07 23:14+0200\n"
+"PO-Revision-Date: 2019-03-07 23:39+0200\n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"X-Generator: Poedit 2.2.1\n"
+"Last-Translator: \n"
+"Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n==0 || (n!=1 && n%100>=1 && n%100<=19) ? 1 : 2);\n"
+"Language: ro\n"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:28
+msgid "Measurement"
+msgstr "Măsurare"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+msgid "Start"
+msgstr "Plecare"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Coords"
+msgstr "Coordonatele"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:50
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:101
+msgid "This is measuring Start point coordinates."
+msgstr "Aceasta măsoară coordonatele punctului de start."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Stop"
+msgstr "Oprire"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:53
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:106
+msgid "This is the measuring Stop point coordinates."
+msgstr "Acesta masoara coordonatele punctului de stop."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:56
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:111
+msgid "This is the distance measured over the X axis."
+msgstr "Aceasta este distanța măsurată pe axa X."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:59
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:117
+msgid "This is the distance measured over the Y axis."
+msgstr "Aceasta este distanța măsurată pe axa Y."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:61
+msgid "DISTANCE"
+msgstr "DISTANTA"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:62
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:123
+msgid "This is the point to point Euclidian distance."
+msgstr "Aceata este distanta Euclidiana de la punct la punct."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:65
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:72
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:79
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:86
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:93
+msgid "Those are the units in which the distance is measured."
+msgstr "Aestea sunt unitatile in care se masoara distanta."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:126
+msgid "Measure"
+msgstr "Masoara"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:185
+msgid "Meas. Tool"
+msgstr "Unealta de masurare"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:278
+msgid "MEASURING: Click on the Start point ..."
+msgstr "Masurare: Click pe punctul de Start ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:307
+msgid "MEASURING: Click on the Destination point ..."
+msgstr "Masurare: Click pe punctul Destinatie ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:328
+msgid "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"
+msgstr "Masurare: Rezultat D(x) = %.4f | D(y) = %.4f | Distanta = %.4f"

locale/ru/LC_MESSAGES/ToolMeasurement.po

@@ -0,0 +1,92 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR ORGANIZATION
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: \n"
+"POT-Creation-Date: 2019-03-07 23:07+0200\n"
+"PO-Revision-Date: 2019-03-07 23:19+0200\n"
+"Language-Team: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Generated-By: pygettext.py 1.5\n"
+"X-Generator: Poedit 2.2.1\n"
+"Last-Translator: \n"
+"Plural-Forms: nplurals=2; plural=(n != 1);\n"
+"Language: en\n"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:28
+msgid "Measurement"
+msgstr "Measurement"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+msgid "Start"
+msgstr "Start"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:49
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Coords"
+msgstr "Coords"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:50
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:101
+msgid "This is measuring Start point coordinates."
+msgstr "This is measuring Start point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:52
+msgid "Stop"
+msgstr "Stop"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:53
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:106
+msgid "This is the measuring Stop point coordinates."
+msgstr "This is the measuring Stop point coordinates."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:56
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:111
+msgid "This is the distance measured over the X axis."
+msgstr "This is the distance measured over the X axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:59
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:117
+msgid "This is the distance measured over the Y axis."
+msgstr "This is the distance measured over the Y axis."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:61
+msgid "DISTANCE"
+msgstr "DISTANCE"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:62
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:123
+msgid "This is the point to point Euclidian distance."
+msgstr "This is the point to point Euclidian distance."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:65
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:72
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:79
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:86
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:93
+msgid "Those are the units in which the distance is measured."
+msgstr "Those are the units in which the distance is measured."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:126
+msgid "Measure"
+msgstr "Measure"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:185
+msgid "Meas. Tool"
+msgstr "Meas. Tool"
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:278
+msgid "MEASURING: Click on the Start point ..."
+msgstr "MEASURING: Click on the Start point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:307
+msgid "MEASURING: Click on the Destination point ..."
+msgstr "MEASURING: Click on the Destination point ..."
+
+#: D:\1.DEV\FlatCAM_beta\flatcamTools\ToolMeasurement.py:328
+msgid "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"
+msgstr "MEASURING: Result D(x) = %.4f | D(y) = %.4f | Distance = %.4f"