sc-ossl-compat.h will check if OpenSSL has been built with or without some
deprecated defines. OpenSSL will provide defines for some of these if
built to still support depreacted routines but not if built with
"no-depracted". .
This commit will define some of the needed defines if ther are not
defined by OpenSSL. Thus if a distro builds OpenSSL with "no-depracted"
it can still be used.
On branch fix-1755
Changes to be committed:
modified: src/libopensc/sc-ossl-compat.h
When card supports SC_ALGORITHM_RSA_PAD_PKCS1 but not SC_ALGORITHM_RSA_HASH_NONE, then the DigestInfo need to be removed.
Current check make requires the card to not support both SC_ALGORITHM_RSA_PAD_PKCS1 and SC_ALGORITHM_RSA_HASH_NONE to have the removal done.
when importing a private key onto a pkcs15 card, if the card does not support
extended APDUs, we need to use chaining to store keys longer than 255 bytes.
While for RSA keys, this check was included, it was missing for EC keys.
This patch adds the SC_APDU_FLAGS_CHAINING flag to apdu.flags if data length is
greater than 255 and the card caps does not include SC_CARD_CAP_APDU_EXT.
Fixes#1747
Fixes regression from commit 3688dfe which did not consider that
the zero prefixing tests were too generic and matched EC keys too.
This simplifies the code even further and avoids data copying
when possible. Proper test is now included to do data value prefixing
only for the RSA keys it is needed.
Closes#1701.
At the point when gemsafe_match_card is called, the card type is already known,
either because of a previous match at card.c, or because it is forced at opensc.conf.
With this redundant match it's not possible to force selection on opensc.conf.
Signed-off-by: Nuno Goncalves <nunojpg@gmail.com>
This adds support for a minimalistic, small and fast card profile based on IAS-ECC.
Based on information from https://installer.id.ee/media/id2019/TD-ID1-Chip-App.pdf
and proprietary driver snoops.
Thanks to @metsma and @frankmorgner.
Change-Id: I2e4b4914d8a3b991d9a639728695abf4a2362ca0
Encode the component ID to be key type and component ID. This allows
each combination to be unique and direct mapping to card component
ID type in the code by just taking the low byte. This simplifies
the code, and reduces confusion as there is now only one #define
for each component.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
MyEID starting version 4.5 supports 4K RSA keys. The card also
now supports proper APDU chainging (for sending large APDUs) and
receiving large responses via GET_RESPONSE splitting.
This updates the following:
* detection code properly announces 3K and 4K RSA support
when available
* APDU chaining is used when possible
* use ISO GET_RESPONSE handling for large responses
* max_recv_size is set to 256 which it always was supposed to be
as the old cards respond with that large responses too
* use the 2K signing kludge only on cards that need it
* unwrap and decipher code paths unified to the extent possible
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Instead of a double check_sw call in case there is no data, assume
that a SW is properly sent by the card and do not expose
SC_ERROR_FILE_END_REACHED outside of the function
(like sc_pkcs15_read_file)
This is to facilitate Estonian eID 2018+ that instead of properly returning
6282 with trunkated data, 9000 is returned and next READ BINARY returns
6b00 (invalid p1/p2). The change should be generally harmless for well-behaving
cards.
Change-Id: I7511ab4841d3bcdf8d6f4a37a9315ea4ac569b10
The code already removes all active cards when the service goes
away, but it doesn't remove the reader. This can be a bit confusing
since they will still be polled and listed.
* Remove postecert and infocamere support because no longer issued
* Remove wrong changes
* reset NEWS
* EC_POINT_set_affine_coordinates_GFp and EC_POINT_get_affine_coordinates_GFp are
deprecated, use EC_POINT_set_affine_coordinates and EC_POINT_get_affine_coordinates
* If OPENSSL API version is < 3 use old functions EC_POINT_[sg]et_affine_coordinates_GFp
* Move the OpenSSL compatibility stuff to src/libopensc/sc-ossl-compat.h
* pgp: initialize ecc keys for OPC3
* Add supported ECC algorithms by card version
* Add tasks identified so far
* pgp: Recognize ECC set on card
* pgp: get_pubkey_pem read ECC pubkey from card
* pgp: minor code changes for ECC compatibility
* pgp: expand sc_cardctl_openpgp_keygen_info to hold ec info
* Fix segfault problem in pkcs15-pubkey.c
* pgp: enable key generation with pkcs15-init and ECC
* pgp: adapt calculate_and_store_fingerprint to accept ECC
* pgp: adapt rest of pgp_gen_key and subfunctions to accept ECC
* pgp: add kdf parameters for ECDH fingerprint calculation
* pgp: enable key import with pkcs15-init and ECC
* pkcs15-pubkey: fix_ec_parameters onlz accpets explicit data or named_curve
* Fix some mistakes during merge
* More clean up for PR
* Fix some ugly alignments
* Improve code readability
* Prevent unitialized variable by using FUNC_RETURN
* OpenPGP: add length check
* pgp: save exponent length in bits for sc_cardctl_openpgp_keystore_info_t
* pgp: length checks and reallocations
* pgp: oid init added
* OpenPGP: slightly re-factor pgp_update_new_algo_attr()
* replace loop copy with memcpy()
* use ushort2bebytes() to set RSA modulus & exponent
* use symbolic name SC_OPENPGP_KEYFORMAT_RSA_STD for the key import format
* OpenPGP: slighly re-factor pgp_parse_and_set_pubkey_output()
* check for RSA modulus & exponent lengths not being a multiple of 8
* make sure RSA modulus & exponent lengths are always set
* remove a left-over RSA setting from the EC code
* pgp: adding BYTES4BITS
* pgp: initialization of values in pgp_build_extended_header_list based on key type
* pgp: add BYTES4BITS and remove unnecessary tests
* Fix broken pgp_update_new_algo_attr
* pgp: fix the ecpoint_len variable
* consistently use term "Invalid key ID; must be 1, 2, or 3" in error messages
about invalid key IDs instead of various alternatives.
* use error type SC_ERROR_INVALID_ARGUMENTS instead of SC_ERROR_INVALID_DATA
when the key_id was passed to the respective function
* harmonize the checks to consistently use 'key_id < ... || key_id > ...'
In addition, initialize a variable to keep clang & compilers on OSX happy.
Combine sequences
sc_log(..., "...");
LOG_FUNC_RETURN(...);
where c_log() prints a constant string
by
LOG_TEST_RET(..., "...");
This change results in shorter, more concise code as well as
better harmonized error messages.
Don't terminate the messages with a period, because they are going to end up
as the first argument to a format string of the form "%s: ...".
I.e. they will be part of a longer string and terminated by a colon anyway.
Use defined symbolic names for well-known DOs to copy data to a correctly
defined buffer 'apdu_data' using ulong2bebytes() instead of relying on
"magic" constants and C's string semantic.
Also use 'sizeof(apdu_data)' instead of additional magic constants.
Use defined symbolic names for well-known DOs to copy data to a correctly
defined buffer 'data' using ulong2bebytes() instead of relying on
"magic" constants and C's string semantic.
Also use 'sizeof(data)' instead of strange strlen() calculations.
Use defined symbolic names for well-known DOs to copy data to a correctly
defined buffer 'data' using ulong2bebytes() instead of relying on
"magic" constants.
Random data from PIV card is obtained using GENERAL AUTHENTICATE command
for a request of a Challenge from the card. "00 87 00 9B 04 7C 02 81 00"
Usually 8 bytes are returned.
NIST 800-73-3_PART2, "A.1 Authentication of the PIV Card Application Administrator"
"Table 11. Authentication of PIV Card Application Administrator" shows an example of
how to do this.
Some cards (one I have: 3b:7d:96:00:00:80:31:80:65:b0:83:11:17:d6:83:00:90:00)
will not allow 2 of these commands in a row. (Maybe assuming command is only
used as in Table 11 and is expecting the second command.)
Code was added to card-piv.c so if "6A 80" is returned, try the command one more time.
For any other GENERAL AUTHENTICATE failure, SC_ERROR_NOT_SUPPORTED is returned.
piv_get_challenge may be called within a loop from sc_get_challenge if more random
data is needed thus causing the the 2 commands to sent in a row.
On branch piv-improved-matching
Changes to be committed:
modified: card-piv.c
Not all PIV applets are the same. Different versions of NIST 800-73 and improperly implemented
or not implemented required features of NIST 800-73 cases problems. Have a look at the card_issues
listed in card-piv.c. The PIV driver has tried to detect the differences based on clues found in
the ATR historical bytes and vendor version numbers for some cards.
At the same time it has tried to support the possibility there are multiple applets
on a card that the user may want to use at the same time from different applications.
This has lead to some detection problems with Dual CAC/PIV cards. The same cards
sold by the vendor may have only a PIV applet that may not be the same PIV applet that
is on the Dual PIV/CAC cards.
http://www.cac.mil/Portals/53/Documents/CAC-utilziation-and-variation-matrix-v2.03-20May2016.doc
defines a number of official CAC cards in active service. A table of the ATRs for these is now used
to detect these cards. The PIV version of the CCC is also read to see if any CAC PKI objects
are defined in the CCC, indicating it is a Dual CAC/PIV, even if the ATR is not listed.
A more conservative approach to try and handle multiple applets on a card is used. Based
on issues with the implementation of the PIV applet this may not be possible to do.
So for many cards no additional detection will be done at the start of every transaction,
and the login state can not be detected correctly.
ATRs for PIVKEY are also in the match table, as these cards have a log of issues.
Other PIV cards in the future or not yet tested may not be covered properly by this patch.
Extra debugging was added with "PIV_MATCH" to help with these other cards.
With "debug = 7;", `grep PIV_MATCH opensc-debug.log` can be used to see how a card
type and card_issues are derived.
On branch piv-improved-matching
Changes to be committed:
modified: card-piv.c
modified: cards.h
pkcs15: added function to get a specific supported algorithm, checking also OID.
This is needed because for AES there are different OIDs for each key length.
For a problem description, see <https://github.com/OpenSC/OpenSC/issues/1524>.
In a nutshell, for a card with the CoolKey applet and 2048-bit keys,
the command
pkcs11-tool --test --login
fails to complete all of its tests.
This commit consists of a patch from @dengert.
To avoid triggering an error when the data exceeds 255 bytes, this commit
limits the amount of the payload sent to the CoolKey applet on the card based
on the maximum amount of data that the card can receive, and overhead bytes
(namely, a header and nonce) that accompany the payload.
With this change, the command
pkcs11-tool --test --login
succeeds.
Not yet complete, but can be run with CKA_TOKEN=FALSE set in the target object. Currently unwrapping emulated
with a decrypt operation in card-myeid.c. To be improved.
* Add minimal CAC1 driver for legacy cards.
It is using the same pkcs15 backend as the CAC2 cards as well as some of
the CAC2 driver methods.
The separation is made mostly for easier card matching or disabling.
Commit e5707b545e broke signing using minidriver on Windows.
More specifically changing #define SC_ALGORITHM_RSA_PAD_NONE from 0x00000000 to 0x00000001 caused a call to sc_pkcs1_encode() to fail as the padding algorithm was not specified anywhere in the CardSignData() implementation. It kind of worked as long as SC_ALGORITHM_RSA_PAD_NONE was 0x00000000, but the above mentioned commit broke this.
Now padding algorithm has to be explicitly specified, otherwise a call to sc_pkcs1_encode() will fail.
- rename 'keytype' in some OpenPGP-specific types to 'key_id'
because they key ID was what the field was used for
- introduce field 'algorithm' in the structures above
to indicate the key's algorithm: RSA, ...
- define constant SC_OPENPGP_KEYALGO_RSA and use it
- rename constants SC_OPENPGP_KEYFORMAT_* to SC_OPENPGP_KEYFORMAT_RSA_*
because they are RSA specific
List additional algorithms & attributes as supported only when the card
supports changing the algorithms attributes DOs and exposes this by having
the EXT_CAP_ALG_ATTR_CHANGEABLE capability set.
Using different algorithms and attributes requires changing the algorithm
attributes DOs. If that is not supported - as indicated by a missing
EXT_CAP_ALG_ATTR_CHANGEABLE capability - then only those algorithms
described by the current algorithms attributes DOs' contents can be used.
In addition simplify setting the flags.
* use variables if they are already there
* be a bit more explicit in logging
* more consistent tag format: %04X
* cleanup flag setting for _sc_card_add_rsa_alg()
card-piv.c
make sure the string is null terminated before passing it
to hex_to_bin routine, which expects it
pkcs15-cac.c
free cn_name on failure
pkcs11-tool.c
make sure the string is null terminated before passing it to
parse_certificate(), which expects it
A card driver may declare support for computing the padding on the card,
or else the padding will be applied locally in padding.c. All five
PKCS11 PSS mechanisms are supported, for signature and verification.
There are a few limits on what we choose to support, in particular I
don't see a need for arbitrary combinations of MGF hash, data hash, and
salt length, so I've restricted it (for the user's benefit) to the only
cases that really matter, where salt_len = hash_len and the same hash is
used for the MGF and data hashing.
------------------------------------------------------------------------
Reworked and extended in 2018 by Jakub Jelen <jjelen@redhat.com> against
current OpenSC master, to actually work with existing PIV cards:
* extended of missing mechanisms (SHA224, possibility to select MGF1)
* compatibility with OpenSSL 1.1+
* Removed the ANSI padding
* Formatting cleanup, error checking
Based on the original work from
https://github.com/NWilson/OpenSC/commit/42f3199e66
Signed-off-by: Jakub Jelen <jjelen@redhat.com>
modified: src/libopensc/pkcs15-infocamere.c
modified: src/libopensc/pkcs15-starcert.c
modified: src/pkcs15init/pkcs15-lib.c
Changed isf_acl to also need SO PIN for CREATE.
modified: src/pkcs15init/starcos.profile
Frank Morgner
Jakub Jelen
Raul Metsma
Doug Engert
Rosen Penev
programatix
Jó Ágila Bitsch
Daniel Kouril
Dmitriy Fortinskiy
Timo Teräs
Andreas Schwier
Nuno Goncalves
Martin Paljak
Andreas Kemnade
Pierre Ossman
Peter Marschall
Alex Karabanov
opensignature
Alexander Paetzelt
Hannu Honkanen
Shahin Hajikhorasani
Steve Ross
Lars Silvén
Jakub Jelen
Luka Logar
Nicholas Wilson
Gabriel Müller
Priit Laes
Alon Bar-Lev
alex-nitrokey